Hi Santosh, Check out the RHEL 4 Redbook here:
http://www.redbooks.ibm.com/abstracts/sg247272.html In Section 11.1 (p. 146, pdf p. 162). There's a step-by-step process, and it sounds like you're already through about half of it. Let me know if you have any questions. -Brad On Mon, 2007-07-30 at 11:40 -0500, Kandi, Santosh wrote: > > Hello all, > > > > I would like to know the procedure to add disk space after completing > the Linux installation (Redhat). > > > > Currently this is how my file systems are defined. > > > > [EMAIL PROTECTED] dev]# df -h > > Filesystem Size Used Avail Use% Mounted on > > /dev/mapper/VolGroup00-LogVol00 > > 2.7G 1.7G 822M 68% / > > /dev/dasda1 97M 11M 82M 12% /boot > > tmpfs 1004M 0 1004M 0% /dev/shm > > > > > > What should I do to say add about 6Gb to install oracle. I have attached > 3 3390-3 to the Guest machine but not sure how the Linux will view those > DASD. > > > > Please point me to any redbooks which might address this question. > > > > Thanks in Advance. > > Santosh > > > > > > > > > > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Brad Hinson <[EMAIL PROTECTED]> Sr. Support Engineer Lead, System z Red Hat, Inc. (919) 754-4198 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390