It wasn't so I brought it online, reran mkinitrd, zipl and rebooted. Still not online after the IPL. I did run the mkinitrd with the -v flag and found the following:
Adding module dasd_mod with options dasd=200-201,210 Bobby Bauer Center for Information Technology National Institutes of Health Bethesda, MD 20892-5628 301-594-7474 -----Original Message----- From: Mark Post [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 25, 2008 2:37 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Having trouble adding a volume >>> On Tue, Mar 25, 2008 at 2:33 PM, in message <[EMAIL PROTECTED]>, "Bauer, Bobby (NIH/CIT) [E]" <[EMAIL PROTECTED]> wrote: > Yeah, that was my though also. I just redid those steps with somebody > who is a bit familiar with Linux looking over my shoulder. Same results, > volume 210 does not come online. I can however use the chccwdev to bring > 210 online after the boot. When you ran mkinitrd, was the 210 volume online at that point? If not, try mkinitrd and zipl while it is online. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
