We ran point-to-point with FCP-attached devices for awhile on RHEL 5 (kernel 2.6.18) on EMC DMX3 hardware. No problem. Never got that error.
Betsie -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of Edmund R. MacKenty Sent: Tuesday, May 27, 2008 8:09 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: FCP Setup On Monday 26 May 2008 10:24, Martin, Terry R. (CMS/CTR) (CTR) wrote: >Has anyone run into the following error while trying to get FCP to work >between z/VM 5.3 and RedHat Linux 4.6. We are connecting to a IBM >DS8100. We present the FCP device to the Linux guest and it sees it. >But they receive the error when they try to do their thing. ... >e49l124d kernel: zfcp: error: Point-to-point fibrechannel configuration >detected at adapter 0.0.5500 unsupported, shutting down adapter Yup. We got that same error on a SLES9 GA system. We switched to a SLES9 SP3 system and the FCP driver worked there. So it looks like PtP FCP support is a fairly recent addition. Haven't tried it with RHEL yet. - MacK. ----- Edmund R. MacKenty Software Architect Rocket Software, Inc. Newton, MA USA ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
