This approach might be good for the zVM lpar that has the linux guests. We have another 2 zVM lpars (general purpose engines only and no linux licenses). In any case, where can one find good doc on setting this up? Any Redbooks?
In this method we are now handling network work - could the network folks who came up with the design provide this on a server as a service? -----Original Message----- From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of David Boyes Sent: Friday, July 11, 2008 1:49 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Changing IP addresses at time of DR You could set up a Linux guest as a NAT front end for the VM stack and just use DHCP. Works very well, and you can pass all sorts of other info as well. > So now we need to figure out how to change the IP addresses for the zVM > systems and the linux guests. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ************************************************************************* This communication, including attachments, is for the exclusive use of addressee and may contain proprietary, confidential and/or privileged information. If you are not the intended recipient, any use, copying, disclosure, dissemination or distribution is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return e-mail, delete this communication and destroy all copies. ************************************************************************* ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390