>>> On 9/1/2008 at 5:13 PM, in message <[EMAIL PROTECTED]>, Florian Bilek <[EMAIL PROTECTED]> wrote: > Dear all, > > Does somebody know when exactly a LVM volume group is activated during > startup of SLES 10 SP2? > > I have defined a LVM with two 3390-25. After a reboot of my LINUX image, the > logical volume is not active and therefore the mount in FSTAB is not > working. > I must do a lvchange -a y system and then the mount is working. > Is the activation also done during the init phase from the initrd and do I > have to make a zipl for this?
Actually, you'll likely need to do both a mkinitrd and zipl, since it appears the necessary LVM kernel modules aren't being included in your current initrd. To make sure, you can do "mkinitrd -f lvm2" and you should be set. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390