That's because, as Mark said, you're attached to a virtual device, and
the "speed" doesn't have much meaning.  Any data flowing Linux to
Linux within the same vswitch could flow much faster than a gigabit,
but data flowing out the physical port is limited by the connection on
that port.  The virtual NIC is only indirectly related to the physical
port.

On Mon, Sep 29, 2008 at 12:39 PM, Scott Rohling <[EMAIL PROTECTED]> wrote:
> Thanks, Bruce -- we did that and confirmed it's set to gigabit..  but there
> seems to be concern from the Linux folks as mii-tools is reporting 100mbs
> and ethtool is not reporting anything...
>
> Scott Rohling
>
> On Mon, Sep 29, 2008 at 10:33 AM, Bruce Hayden <[EMAIL PROTECTED]> wrote:
>
>> You'd need to get onto the HMC and use OSA Advanced facilities, select
>> to view port parameters, and it will show you the current settings.
>>
>> On Mon, Sep 29, 2008 at 12:21 PM, Scott Rohling <[EMAIL PROTECTED]>
>> wrote:
>> > Any ideas on how we can verify what the speed really is?   Since they are
>> > seeing this number - there is now doubt in the air :-)
>> >
>> > Scott Rohling
>> >
>> > p.s.  ethtool eth0   return 'No data available'
>>
>>
>> --
>> Bruce Hayden
>> Linux on System z Advanced Technical Support
>> IBM, Endicott, NY
>>
>> ----------------------------------------------------------------------
>> For LINUX-390 subscribe / signoff / archive access instructions,
>> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or
>> visit
>> http://www.marist.edu/htbin/wlvindex?LINUX-390
>>
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
>



--
Bruce Hayden
Linux on System z Advanced Technical Support
IBM, Endicott, NY

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390

Reply via email to