Thanks! Saves me some looking (and finding the stuff that doesn't work :) I'm going to consult with my network guy and see which he advises for our case.
Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Mark Post Sent: Friday, January 23, 2009 9:04 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: [LINUX-390] bonding multiple qeth vnics to vswitch? >>> On 1/23/2009 at 11:32 AM, Marcy Cortes <marcy.d.cor...@wellsfargo.com> wrote: -snip- > Now... To figure out how to try the balanced mode. I put "options bonding mode=?" in /etc/modprobe.conf.local for my testing. Be careful, though. Some of the examples I ran across on the 'net showed this (which didn't work): alias bond0 bonding options bond0 mode= Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390