>>> On 1/28/2009 at 1:15 PM, "Jones, Russell" <russell.jo...@anpac.com> wrote: -snip- > I changed my dasd fstab setting to use device path, ipl'ed my base > system, shut it down, copied the volume using mvs dss copy, ipl'ed the > base system and mounted the cloned file system on the base system. I > then did a chroot to the new file system.
> The mkinitrd command looks good except for the "DASDs" section. It is > getting those addresses from what I have mounted on the base system and > I want it to use 322b and 322f. If you can IPL the new system from 322b, then go ahead and after the system is up, re-run mkinitrd and zipl. It should only pick up the volumes you're currently using. Mark Post ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390