Hi Mark, please omit the OSAHWaddr! However, in that case booting the instsys will not run unattended anymore. When the setup routine asks for the MAC address, please leave it blank (press enter twice under z/VM) and the remainder should work.
By the way, it has been a good practice to limit the parmfile to 9 lines; maybe that this restriction is no more valid. With kind regards Thorsten Diehl System Test Linux on System z IBM Deutschland Research & Development GmbH Vorsitzender des Aufsichtsrats: Martin Jetter Geschaeftsfuehrung: Erich Baier Sitz der Gesellschaft: Boeblingen Registergericht: Amtsgericht Stuttgart, HRB 243294 Mark Pace schrieb am 02.04.2009 21:49:
Has anyone successfully installed SLES11 using a Layer2 vswitch? I've installed using layer3 vswitch then migrated to a layer2. Also installed via hipersockets. But can't do an install on a layer2 switch. checking CCW address 0.0.1d00 checking CCW address 0.0.1d01 checking CCW address 0.0.1d02 (portname vswtch1) (Layer2) qeth.933eb7: register layer 2 discipline (Port 0) qdio: 0.0.1d02 OSA on SC 3 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA:RW AO qeth.e13e5b: 0.0.1d00: MAC address 02:00:85:00:00:06 successfully registered on device eth0 qeth.736dae: 0.0.1d00: Device is a Guest LAN QDIO card (level: V541) with link type GuestLAN QDIO (portname: vswtch1) ccwgroup 0.0.1d00 has network IF eth0 *** glibc detected *** /init: free(): invalid pointer: 0x000003ffff8ea4e4 *** Kernel panic - not syncing: Attempted to kill init! HCPGIR450W CP entered; disabled wait PSW 00020001 80000000 00000000 00110E8A My parm file. ramdisk_size=131072 root=/dev/ram1 ro init=/linuxrc TERM=dumb HostIP=199.44.xxx.xx Gateway=199.44.xxx.x Nameserver=199.44.xx.xx HostName=host.domain OSAHWaddr=02-00-85-00-00-06 InstNetDev=osa Netmask=255.255.255.128 Broadcast=199.44.xxx.xxx OsaInterface=qdio OsaMedium=eth Layer2=1 ReadChannel=0.0.1d00 Writechannel=0.0.1d01 DataChannel=0.0.1d02 Portname=vswtch1 PortNo=0 Install=ftp://user:p...@199.44.xxx.xx/DVD1 UseSSH=1 SSHPassword=pass linuxrclog=/dev/console -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
