Thanks all, that's probably it. We had 1G of memory... We'll try it
with 2G...
Thanks,
Lee
On 3/4/2010 7:26 PM, Shawn Wells wrote:
On 03/04/2010 09:12 PM, Mark Post wrote:
On 3/4/2010 at 08:48 PM, Lee
Stewart<lstewart.dsgr...@attglobal.net> wrote:
Is anyone doing Kickstart installs on RedHat 5.4?
No matter what I tried, it acted as if it wasn't reading the CMS config
file (for the install network), much less the kickstart file... And
there don't seem to be any logs or anything else...
There's been some discussion recently about an Anaconda bug that show
up if you have only 1 processor defined or exactly 2GB of storage
defined. What's your system look like?
When installing to a z/VM guest or LPAR that is configured with 1 CPU
and/or
less than 2 GB storage (memory), the installer will prompt for the network
configuration, regardless of whether these parameters appear in the PARM or
CONF files. This is due to an unexpected side effect of a kernel change in
RHEL 5.4, and will be fixed in the RHEL 5.5 installer.
There are multiple ways to workaround this issue:
First, define at least 2 CPUs to the LPAR or z/VM guest. Note that if
running
under z/VM, defining an additional CPU does not require an additional
physical
IFL.
If an additional CPU cannot be defined, the second workaround is to
define at
least 2 GB storage (memory) to this guest or LPAR. Note that under z/VM,
this
does not require additional physical storage.
If neither of these workarounds are possible, customers can contact Red
Hat support to
obtain an intermediate kernel fix before RHEL 5.5 is released.
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
--
Lee Stewart, Senior SE
Sirius Computer Solutions
Phone: (303) 996-7122
Email: lee.stew...@siriuscom.com
Web: www.siriuscom.com
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
