I'm trying to build a new server under VM and can't seem to get the virtual NIC 
to talk to the vswitch to come online. The error seems to indicate a mismatch 
between layer2 and layer3 but I can't see it. Any help would be appreciated. 
I've cross posted to the zVM listserve



When I log into the server I see:

NIC 0800 is created; devices 0800-0802 defined

z/VM Version 5 Release 4.0, Service Level 0903 (64-bit),

built on IBM Virtualization Technology

There is no logmsg data



Displaying the vswitch it sure looks like layer 2 to me:

q vswitch vsw2

VSWITCH SYSTEM VSW2     Type: VSWITCH Connected: 4    Maxconn: INFINITE

  PERSISTENT  RESTRICTED    ETHERNET                  Accounting: OFF

  VLAN Unaware

  MAC address: 02-00-00-00-00-03

  State: Ready

  IPTimeout: 5         QueueStorage: 8

  Isolation Status: OFF

  RDEV: 0C64.P00 VDEV: 0C64 Controller: DTCVSW1

  RDEV: 0C74.P00 VDEV: 0C74 Controller: DTCVSW2  BACKUP



The conf file I'm using:

HOSTNAME=ODBD1.CIT.NIH.GOV

DASD=200-205

NETTYPE=qeth

IPADDR=128.231.xxx.xx

SUBCHANNELS=0.0.0800,0.0.0801,0.0.0802

NETMASK=255.255.254.0

BROADCAST=128.231.xxx.xxx

NETWORK=128.231.xxx.0

PORTNAME=UNASSIGNED

LAYER2=0

DNS=156.40.xx.xx

SEARCHDNS=NIH.GOV

GATEWAY=128.231.xxx.x



When I issue ODBD1 I eventually get:

qeth: loading qeth S/390 OSA-Express driver

qeth: received an IDX TERMINATE with cause code 0xf6

qeth: sense data available on channel 0.0.0800.

qeth:  cstat 0x0

 dstat 0xE

qeth: irb: 00 c2 60 17  00 f7 60 38  0e 00 10 00  00 80 00 00

qeth: irb: 01 02 00 00  00 00 00 00  00 00 00 00  00 00 00 00

qeth: sense data: 02 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00

qeth: sense data: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00

qeth: Initialization in hardsetup failed! rc=-5

SIOCSIFNETMASK: No such device

SIOCSIFBRDADDR: No such device

ping: sendto: Network is unreachable






Bobby Bauer
Center for Information Technology
National Institutes of Health
Bethesda, MD 20892-5628
301-594-7474

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Reply via email to