Perfect... thank you. I'll tweak /etc/inittab
2011/2/9 van Sleeuwen, Berry <berry.vansleeu...@atosorigin.com> > Hello Donald, > > The SIGNAL SHUTDOWN acts like a CTRL-ALT-DEL. So in your /etc/inittab > you should change the CTRL-ALT-DEL behaviour to switch to runlevel 0 > instead of 6. > > Regards, Berry. > > > -----Original Message----- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > Donald Russell > Sent: donderdag 10 februari 2011 4:12 > To: LINUX-390@VM.MARIST.EDU > Subject: signal shutdown user xx within yy > > RHEL 5 > > I use the following chshut commands (in /etc/rc.local) chshut halt vmcmd > LOGOFF chshut poff vmcmd LOGOFF > > They shudown and logoff properly when I use shutdown -h or -P options > from zLinux, > > From another ID, when I use CP SIGNAL SHUTDOWN <zLinux machine id> > WITHIN <x> zLinux also shuts down and logs off, but it goes to runlevel > 6 (reboot) instead of a more expected runlevel 0 (halt). > > The net effect is the same, it shuts down clean and logs off, but is > there something I can change so a SIGNAL SHUTDOWN will cause it to go to > runlevel 0? > > I prefer that because I have an automated email that goes out when the > system shuts down, and if the "new" runlevel is 6 the email suggests the > outage will be short as it is just a reboot. > > Thanks > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/