I would think that you would just escape character the space. path = /srv/smb/shares/MFPL/PL\ Linux
On Wed, Apr 27, 2011 at 10:58 AM, Tom Duerbusch <duerbus...@stlouiscity.com>wrote: > So far, all the responses are about the SMB.CONF file. > > Just a reminder, that, not only you have to put all the users in the same > group for this to work, but when you create the directory structure, I > believe that you also have to do a chmod 770 for that subdirectory for the > group authority. > > And you may have to do a chuser to specify a common userid (but I'm not > clear on that one). > > I have another samba authorization question, that I will bring up in > another thread. > > Tom Duerbusch > THD Consulting > > >>> "Dean, David (I/S)" <david_d...@bcbst.com> 4/27/2011 9:13 AM >>> > And take the space out of the directory name. > > -----Original Message----- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > Richard Gasiorowski > Sent: Wednesday, April 27, 2011 8:59 AM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Samba authorization > > Most likely the parent directory is 740 > > Richard (Gaz) Gasiorowski > Solution Architect > CSC > 3170 Fairview Park Dr., Falls Church, VA 22042 > 845-889-8533|Work|845-392-7889 Cell|rgasi...@csc.com|www.csc.com > > > > > This is a PRIVATE message. If you are not the intended recipient, please > delete without copying and kindly advise us by e-mail of the mistake in > delivery. > NOTE: Regardless of content, this e-mail shall not operate to bind CSC to > any order or other contract unless pursuant to explicit written agreement > or government initiative expressly permitting the use of e-mail for such > purpose. > > > > From: > "van Sleeuwen, Berry" <berry.vansleeu...@atosorigin.com> > To: > LINUX-390@vm.marist.edu > Date: > 04/27/2011 08:55 AM > Subject: > Samba authorization > > > > Hi Listers, > > On SLES10 SP2 we are running a samba. We would like to have shares for > specific groups. For instance we have a group zlinux that would get access > into the "PL Linux" directory and they must be able to read and write into > this directory. Several resources on the net give us the configuration for > this but so far we were not able to get the results we expected. > > The /etc/smb.conf contains: > [PL Linux] > # Identification > comment = PL Linux > > # Management > path = /srv/smb/shares/MFPL/PL Linux > writable = yes > force group = zlinux > valid users = @zlinux > > # Access set up > create mask = 0770 > directory mask = 0770 > force create mode = 0660 > force directory mode = 0770 > > According to the config a new file should be created with group zlinux and > mask 770. But when we create a document we see: > > -rwxr--r-- 1 nl12237 users 0 Apr 27 13:45 New (10) Text Document.txt > > So, in the group users and mask 744. > > What can we do to get the samba to create the file under group zlinux and > with 770 instead of 744? > > Met vriendelijke groet/With kind regards, > Berry van Sleeuwen > Flight Forum 3000 5657 EW Eindhoven > * +31 (0)6 22564276 > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ----------------------------------------------------- > Please see the following link for the BlueCross BlueShield of Tennessee > E-mail disclaimer: http://www.bcbst.com/email_disclaimer.shtm > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > -- Mark D Pace Senior Systems Engineer Mainline Information Systems ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
