hmm...191 too small? Are you using the FCXRENAM EXEC to good avail? David -------- Original Message -------- Subject: Re: Performance toolkit - HCPMOG6556E From: Kobus Erwee <kobus.er...@sita.co.za> Date: Wed, June 15, 2011 7:21 am To: LINUX-390@VM.MARIST.EDU
Thanks for all the replies. With all the inputs I managed to get it working again. My problems started when I tried to fix PERFSVM (The 191 disk was too small). Yes, you heard me correctly, I fixed it so good that it was broken :-). I increased the disk but somehow messed something up. After that it kept on giving the DCSS error. After I had a look at the valuable comments of people on the list (David, Scott, Billy) I managed to increase the DCSS to a value acceptable for my performance toolkit. At first I did not increase it enough. What worked at our site was - CP DEFSEG MONDCSS 04000-07FFF SC RSTD (Billy, as you suggested) Thanks again Kobus > -----Original Message----- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > David Kreuter > Sent: 14 June 2011 04:21 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Performance toolkit - HCPMOG6556E > > Hi Kobus: From MAINT or the PERFSVM user issue a QUERY MONITOR. Note > the size of sample pages, consider making it much larger. You will > need > to create a new larger MONDCSS to contain the new larger sample area. > There's an IBM calculation somewhere but I recommend starting by > doubling the size of the sample area. > Handy command: MONITOR SAMPLE CONFIG SIZE n > where n = number of pages > David Kreuter > > -------- Original Message -------- > Subject: Performance toolkit - HCPMOG6556E > From: Kobus Erwee <kobus.er...@sita.co.za> > Date: Tue, June 14, 2011 9:57 am > To: LINUX-390@VM.MARIST.EDU > > Hi, > > > > Can anyone please tell me why I get the following error when starting > PERFSVM. You can not use the gui or 3270 interactive monitor as the > collection of data is not active. > > > > FCXBAS500I Performance Toolkit for VM FL530 > > > FCXPMN445E Return code 6556 for MONITOR START command > > > FCXAPP530I Connected to *IDENT for resource FCXRES00 > > > FCXAPF530I Connected to *IDENT for resource FCXSYSTM > > > FCXTCP571I Connected to TCP/IP server TCPIP on path 0003 > > > FCXTCR571I Connected to TCP/IP server TCPIP on path 0004 > > > FCXAPP527I User PERFSVM connected on path 0006 > > > FCXAPC535I Connected to resource FCXRES00 on path 0000, for S&F-Coll > > > FCXTCP575I WebServer host IP address is 10.131.56.250:00081 > > > FCXTCR575I TCPRequest host IP address is 10.131.56.250:41780 > > > FCXTCR590I TCPRequest interface activated > > > FCXTCP590I WebServer interface activated > > > Monitor event started -- recording is activated > > > HCPMOG6556E Sample monitoring cannot start because there are not enough > pages > > available in the DCSS MONDCSS. 1792 pages are available. > > > > When I do a q nss all map the output for mandcss is as follow: > > 0031 MONDCSS CPDCSS N/A 02200 02FFF SC R 00001 N/A > N/A > > > > In what config file must I change what? > > > > Any help would be appreciated. > > > > Kobus > > > . > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > > ----- > No virus found in this message. > Checked by AVG - www.avg.com > Version: 10.0.1382 / Virus Database: 1513/3702 - Release Date: 06/13/11 . ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/