I am trying to mount a disk R/O from two linux machines on one VM. One
of them is SLES10 where the disk is defined in zipl.conf. The other
is a new SLES11 ('CLPRODB2)..
The disk is mounted RW on a SLES10sp3 machine.
The SLES10 machine sees partition 1, but the SLES11 machine doesn't.
After dasd_configure, /dev/dasdk appears, but not /dev/dasdk1.
On the VM console for the SLES11 machine, I get the following msg:
----------------------
DPRODDB2 login: dasd-eckd.90fb0d: 0.0.0119: New DASD 3390/0C (CU
3990/01) with 3
2759 cylinders, 15 heads, 224 sectors
dasd-eckd.412b53: 0.0.0119: DASD with 4 KB/block, 23586480 KB total
size, 48 KB/
track, compatible disk layout
dasdk:
Warning, expected Label VOL1 not found, treating as CDL formated Disk
Oct 11 08:08:21 DPRODDB2 kernel: Warning, expected Label VOL1 not found,
treating as CDL formated Disk
----------------------
Has the formatting changed from SLES10 to SLES11? so that the partition
wouldn't be visible?
I have the option of backing up the data and reformatting the disk from
SLES10SP3. Is there anything I should be aware of?
Regards
Roger Evans
Autodata Norge A/S
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
