Hi, i think that is exactly your problem. If i got it right you are not using npiv. That means that all guests are using the same wwpn to the fabric on a spesific cec. 2 linux guests on the same cec cant access the same luns at the same time. The first guesr in the cec to access the luns wins. Either make sure you only share disks on different cecs and that no other guest is trying to access them, or enable npiv. We enabled npiv causing each linux guest to have its own virtual wwpn. This make life simpler from clustering point of view.
Hope this helps... Offer Baruch Sent by emoze push mail ----------------------------- From: "Shumate, Scott" <scshum...@bbandt.com> Subject: Re: zFCP question for RHEL54 Date: 07 דצמבר 2011 00:14 There are 2 CECs involved. Each CEC has 4 fibre connections, 2 in one switch and 2 in another. In our HDS box, we have 4 ports fibre cards (2 in one switch and 2 in the other). The way its zoned is 4 connections from the CECs (2 from one CEC and 2 from the other) is zoned to 2 port on the HDS box. So here is a break down ZONE IN SWITCH1 CEC1 CHP 9C CEC1 CHP 9D CEC2 CHP 48 CEC2 CHP 49 HDS PORT CL1-G HDS PORT CL2-G ZONE IN SWITCH2 CEC1 CHP 9E CEC1 CHP 9F CEC2 CHP 44 CEC2 CHP 47 HDS PORT CL1-H HDS PORT CL2-H To give you a break down, this server lives on CEC2 0.0.dc00 is attached to CHP 44 0.0.dd00 is attached to CHP 47 0.0.de00 is attached to CHP 48 0.0.df00 is attached to CHP 49 I have another server that runs with the same zfcp.conf file. It attaches with no issues. That is what's confusing me. Is it a zoning issue? Thanks Scott -----Original Message----- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Raymond Higgs Sent: Tuesday, December 06, 2011 4:11 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: zFCP question for RHEL54 Scott, > Dec 6 14:28:15 wil-zstsccdbtstbu01 kernel: zfcp: warning: failed > gid_pn nameserver request for wwpn 0x50060e800571f006 for adapter 0.0.dc00 > Dec 6 14:28:15 wil-zstsccdbtstbu01 kernel: zfcp: port erp failed > (adapter 0.0.dc00, wwpn=0x50060e800571f006) The nameserver is a service that runs on your switches. GID_PN is a request to the nameserver for Get Port Identifier by Port Name. The error is that switch doesn't know about target port 0x50060e800571f006 so it can't return the n-port id that Linux needs. I'd investigate like this... 1. check zoning on your switch. Your channel may not have permission to talk to that target port. 2. check NPIV settings. If NPIV is on and you meant for it to be off, then that may change how you zone at the switch. 3. check cabling. If these linux systems are running on 2 different CECs, then maybe some channels on 1 CEC aren't cabled the way you expect. Regards, Ray Higgs System z FCP Firmware Development Bld. 706, B42 2455 South Road Poughkeepsie, NY 12601 (845) 435-8666, T/L 295-8666 rayhi...@us.ibm.com Linux on 390 Port <LINUX-390@vm.marist.edu> wrote on 12/06/2011 03:04:53 PM: > From: "Shumate, Scott" <scshum...@bbandt.com> > To: LINUX-390@vm.marist.edu > Date: 12/06/2011 03:11 PM > Subject: zFCP question for RHEL54 > Sent by: Linux on 390 Port <LINUX-390@vm.marist.edu> > > I'm running into issues adding zFCP LUNS to a clustered zLinux server. > The primary servers sees the disk with no issues and have > multipath'ing turned on. Both servers should be pointing to the same > scsi disk. What am I missing? Any ideas? I've tried rebooting with > no results. I do see the following error in /var/log/messages > > Dec 6 14:28:15 wil-zstsccdbtstbu01 kernel: zfcp: warning: failed > gid_pn nameserver request for wwpn 0x50060e800571f006 for adapter 0.0.dc00 > Dec 6 14:28:15 wil-zstsccdbtstbu01 kernel: zfcp: port erp failed > (adapter 0.0.dc00, wwpn=0x50060e800571f006) > > I see this for each adapter. I did try to remove the unit and port > vary the adapters offline and tried it again with the same results. > > The server that works > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > [root@wil-zstsccdbtst01 ~]# lsscsi > [0:0:0:1] disk HITACHI OPEN-V 6008 /dev/sda > [0:0:0:2] disk HITACHI OPEN-V 6008 /dev/sde > [1:0:0:1] disk HITACHI OPEN-V 6008 /dev/sdb > [2:0:0:1] disk HITACHI OPEN-V 6008 /dev/sdc > [3:0:0:1] disk HITACHI OPEN-V 6008 /dev/sdd > > [root@wil-zstsccdbtst01 ~]# lszfcp -D > 0.0.dc00/0x50060e800571f006/0x0017000000000000 0:0:0:1 > 0.0.dc00/0x50060e800571f006/0x0019000000000000 0:0:0:2 > 0.0.dd00/0x50060e800571f016/0x0017000000000000 1:0:0:1 > 0.0.de00/0x50060e800571f007/0x0017000000000000 2:0:0:1 > 0.0.df00/0x50060e800571f017/0x0017000000000000 3:0:0:1 > > [root@wil-zstsccdbtst01 ~]# cat /etc/zfcp.conf > 0.0.dc00 0x50060e800571f006 0x0017000000000000 > 0.0.dd00 0x50060e800571f016 0x0017000000000000 > 0.0.de00 0x50060e800571f007 0x0017000000000000 > 0.0.df00 0x50060e800571f017 0x0017000000000000 > 0.0.dc00 0x50060e800571f006 0x0019000000000000 > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > The server that fails > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > [root@wil-zstsccdbtstbu01 0x50060e800571f006]# lsscsi > [root@wil-zstsccdbtstbu01 0x50060e800571f006]# > > [root@wil-zstsccdbtstbu01 0x50060e800571f006]# lszfcp -D > Error: No fcp devices found. > > [root@wil-zstsccdbtstbu01 0x50060e800571f006]# cat /etc/zfcp.conf > 0.0.dc00 0x50060e800571f006 0x0017000000000000 > 0.0.dd00 0x50060e800571f016 0x0017000000000000 > 0.0.de00 0x50060e800571f007 0x0017000000000000 > 0.0.df00 0x50060e800571f017 0x0017000000000000 > 0.0.dc00 0x50060e800571f006 0x0019000000000000 > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > > > Thanks > Scott > > -----Original Message----- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > John Campbell > Sent: Monday, December 05, 2011 9:25 AM > To: LINUX-390@VM.MARIST.EDU > Subject: At the optometrist's ... > > http://www.datamation.com/imagesvr_ce/5678/geek-eye-doctor.jpg ;-) > > My first though was whether there'd be enough humor in an EBCDIC version. > > -soup > > -- > John R. Campbell Speaker to Machines souperb at > gmail dot com MacOS X proved it was easier to make Unix user- friendly > than to fix Windows > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit http://wiki.linuxvm.org/ > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
