Yes - wasn't sure if you'd typo'd entering them or these were actually the directory entries.. if the latter - yep - you'll be missing 500 cyls on your LVM disks.
Anyway - easy mistake .. I assume the correct sizes will make it all work again :) p.s. your 202 should remain 32259 .. it's got a 500 cylinder 191 disk in front of it (awful big disk! we should talk about a common Linux guest 191 .. you should not really need a r/w disk CMS disk for a Linux guest) Scott Rohling On Tue, Dec 3, 2013 at 1:24 PM, Dean, David (I/S) <david_d...@bcbst.com>wrote: > Scott, I think you've got it, I will try tomorrow. Look at the LVM DASD > sizes, I made the same mistake again! Hard to put 6 gallons in a 5 gallon > bucket. I will let you know. > > -----Original Message----- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > Scott Rohling > Sent: Tuesday, December 03, 2013 2:51 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: sles11.2 mount logical volumes by path > > Is the clone directory entry a typo? 32259 instead of 32759 ? Your gold > image also uses 32259 for the 202 disk.. so a little confusing in the > numbers between the 2 directory entries -- I didn't notice this at first > glance.. > > From what you list - your sizes don't match - but I would think the > DDR/FLASHCOPY would fail or at least complain if those are the actual > values you're using.. > > Scott Rohling > > > On Tue, Dec 3, 2013 at 9:28 AM, Dean, David (I/S) <david_d...@bcbst.com > >wrote: > > > REFERENCE DASD IN STRING BELOW > > > > New Clone > > Three "blank" DASD > > > > Cpfmtxa BA4d > > Format > > 000 end > > Label l12501 > > > > Cpfmtxa BB50 > > Format > > 000 end > > Label l12502 > > > > Cpfmtxa BC4A > > Format > > 000 end > > Label l12503 > > > > FLASHCOPY C74D 000 END BA4D 000 END SAVELABEL FLASHCOPY C650 000 END > > BB50 000 END SAVELABEL FLASHCOPY C651 000 END BC4A 000 END SAVELABEL > > > > GOLD IMAGE USER DIR > > > > USER LNXGLD XXXXX 1024M 1024M > > INCLUDE LINDFLT > > MDISK 191 3390 0001 0500 LGLD01 MR READ WRITE MULTIPLE MDISK 202 > > 3390 0501 32259 LGLD01 MR READ WRITE MULTIPLE MDISK 700 3390 0001 > > 32759 LGLD02 MR READ WRITE MULTIPLE MDISK 701 3390 0001 32759 LGLD03 > > MR READ WRITE MULTIPLE > > > > NEW CLONE USER DIR > > > > USER LNX125 XXXXX 1024M 1024M > > INCLUDE LINDFLT > > MDISK 191 3390 0001 0500 L12501 MR READ WRITE MULTIPLE MDISK 202 > > 3390 0501 32259 L12501 MR READ WRITE MULTIPLE MDISK 700 3390 0001 > > 32259 L12502 MR READ WRITE MULTIPLE MDISK 701 3390 0001 32259 L12503 > > MR READ WRITE MULTIPLE > > > > > > AFTER THE FLASHCOPY (OR DDR) I BRING UP THE "NEW CLONE", LOGIN IN, > > CHANGE IP INFO, AND I AM DONE. > > > > lnxgld:/ # pvdisplay > > --- Physical volume --- > > PV Name /dev/dasdc1 > > VG Name vg1 > > PV Size 22.49 GiB / not usable 1.36 MiB > > Allocatable yes (but full) > > PE Size 4.00 MiB > > Total PE 5757 > > Free PE 0 > > Allocated PE 5757 > > PV UUID EFMyi9-pjxQ-vGwt-ieZI-CcgA-Sp5A-2LXrF0 > > > > --- Physical volume --- > > PV Name /dev/dasdb1 > > VG Name vg1 > > PV Size 22.49 GiB / not usable 1.36 MiB > > Allocatable yes (but full) > > PE Size 4.00 MiB > > Total PE 5757 > > Free PE 0 > > Allocated PE 5757 > > PV UUID uEiwua-aooC-XYIY-GH8b-BQVV-Nfi3-Gm9vzx > > > > nxgld:/ # lvdisplay > > --- Logical volume --- > > LV Name /dev/vg1/lv1 > > VG Name vg1 > > LV UUID fJ0chp-pW7a-bTdq-peCs-TmD2-ILHc-pJAydj > > LV Write Access read/write > > LV Status available > > # open 1 > > LV Size 44.98 GiB > > Current LE 11514 > > Segments 2 > > Allocation inherit > > Read ahead sectors auto > > - currently set to 1024 > > Block device 253:0 > > > > lnxgld:/ # vgdisplay > > --- Volume group --- > > VG Name vg1 > > System ID > > Format lvm2 > > Metadata Areas 2 > > Metadata Sequence No 2 > > VG Access read/write > > VG Status resizable > > MAX LV 0 > > Cur LV 1 > > Open LV 1 > > Max PV 0 > > Cur PV 2 > > Act PV 2 > > VG Size 44.98 GiB > > PE Size 4.00 MiB > > Total PE 11514 > > Alloc PE / Size 11514 / 44.98 GiB > > Free PE / Size 0 / 0 > > VG UUID l9PjbN-u8Ai-8BxO-d3sf-6KAM-htkA-uIf72w > > > > > > > > > > > > -----Original Message----- > > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > > Scott Rohling > > Sent: Tuesday, December 03, 2013 10:56 AM > > To: LINUX-390@VM.MARIST.EDU > > Subject: Re: sles11.2 mount logical volumes by path > > > > Since it looks like you're DDRing a whole DASD rather then a minidisk -- > > are you relabelling, etc? I'm confused from your example what you're > > cloning and how.. Can you show us the directory entry? > > > > Scott Rohling > > > > > > On Tue, Dec 3, 2013 at 7:20 AM, Dean, David (I/S) > > <david_d...@bcbst.com > > >wrote: > > > > > Ouch, you are right, I cut and pasted the wrong line. It should > > > have been the /dev/vg1/lv1, sorry about that. However the problem > > > is that in the past we just DDR'd or flashcopied only the three DASD > > > we use and everything worked, has this changed, or am I just missing > something? > > > > > > Example (I hope this formats right) > > > > > > DASD "gold" DASD "new clone" > > > > > > C74d --> BA4D > > > 191 > > > 202 OS > > > > > > C650 LVM --> BB50 > > > C651 LVM --> BC4A > > > > > > > > > Maybe I should not have attended college in the 70's..? > > > > > > > > > > > > -----Original Message----- > > > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf > > > Of Michael MacIsaac > > > Sent: Tuesday, December 03, 2013 9:56 AM > > > To: LINUX-390@VM.MARIST.EDU > > > Subject: Re: sles11.2 mount logical volumes by path > > > > > > David, > > > > > > Logical volumes are usually referenced in /etc/fstab by their /dev > entry. > > > For example: > > > > > > /dev/opt_vg/opt_lv /opt ext3 acl,user_xattr > 1 > > > 2 > > > > > > That is probably why by-path is not an option. > > > > > > Then you write: > > > > caught this when I DDR'd our "golden image" and attempted to > > > > bring it up and it cannot find and mount > > > > " /dev/disk/by-path/ccw-0.0.0202-part1 / ext3 > > > acl,user_xattr 1 1 > > > > > > This entry does not look like a logical volume, rather a > > > conventional file system on a minidisk. > > > > > > To clone Linux systems that contain LVs with DDR, just copy all the > > > PVs (minidisks). Linux will put the PVs, VGs and LVs back together > > > on the clone. > > > > > > Hope this helps. > > > > > > "Mike MacIsaac" <mikemac at-sign us.ibm.com> > > > > > > -------------------------------------------------------------------- > > > -- For LINUX-390 subscribe / signoff / archive access instructions, > > > send email to lists...@vm.marist.edu with the message: INFO > > > LINUX-390 or visit > > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > -------------------------------------------------------------------- > > > -- For more information on Linux on System z, visit > > > http://wiki.linuxvm.org/ > > > ----------------------------------------------------- > > > Please see the following link for the BlueCross BlueShield of > > > Tennessee E-mail disclaimer: > > > http://www.bcbst.com/email_disclaimer.shtm > > > > > > -------------------------------------------------------------------- > > > -- For LINUX-390 subscribe / signoff / archive access instructions, > > > send email to lists...@vm.marist.edu with the message: INFO > > > LINUX-390 or visit > > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > > -------------------------------------------------------------------- > > > -- For more information on Linux on System z, visit > > > http://wiki.linuxvm.org/ > > > > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, send > > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > > For more information on Linux on System z, visit > > http://wiki.linuxvm.org/ > > ----------------------------------------------------- > > Please see the following link for the BlueCross BlueShield of > > Tennessee E-mail disclaimer: > > http://www.bcbst.com/email_disclaimer.shtm > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, send > > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > > For more information on Linux on System z, visit > > http://wiki.linuxvm.org/ > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit http://wiki.linuxvm.org/ > ----------------------------------------------------- > Please see the following link for the BlueCross BlueShield of Tennessee > E-mail disclaimer: http://www.bcbst.com/email_disclaimer.shtm > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
