It must be an outdated IBM document. I can successfully run the " VMFBTMAP ALL"
command under maint630 id and now I can have a smaller customized RSU for z/VM
system.
Thanks,
Ray
-----Original Message-----
From: Chu, Raymond
Sent: Monday, November 17, 2014 4:25 PM
To: LINUX-390@VM.MARIST.EDU
Subject: RE: Ran out of space when applying RSU
It seems I have already had the latest RSU.
I followed an IBM document with this "VMFBTMAP ALL" command under maint ID to
generate a z/VM service reports to list the fixes install on z/VM systems, it
reported the following errors:
VMFBTMAP ALL
VMFUTL2767I Reading VMFINS DEFAULTS B for additional options
VMFBMP2304E The Software Inventory disk (51D) must be accessed as D with R/W
status
VMFBMP2760I VMFBTMAP processing completed unsuccessfully
Do I suppose to run the command under maint630 or maint?
Thanks,
Ray
-----Original Message-----
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Hodge,
Robert L
Sent: Monday, November 17, 2014 4:04 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Ran out of space when applying RSU
Email sent from outside of PSEG. Use caution before using links/attachments.
It is RSU 1401.
-----Original Message-----
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Chu,
Raymond
Sent: Monday, November 17, 2014 2:00 PM
To: LINUX-390@VM.MARIST.EDU
Subject: EXTERNAL: Re: Ran out of space when applying RSU
It came with the z/VM installation. I ran the "q cplevel" command and had the
following
q cplevel
z/VM Version 6 Release 3.0, service level 1302 (64-bit)
Generated at 08/07/13 11:42:58 UTC
What I have now is second RSU in the year 2013. If I interpret "6302RSU1”
correctly, it should be V6.3 Second RSU but do not know the year.
-----Original Message-----
From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Dave Jones
Sent: Monday, November 17, 2014 3:45 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Ran out of space when applying RSU
Email sent from outside of PSEG. Use caution before using links/attachments.
Hi, Ray.
Have you already applied the 630RSU1 to the system? If you have, then you can
delete it from the 500 mdisk.
Have a good one, too.
DJ
On 11/17/2014 02:29 PM, Chu, Raymond wrote:
> Hi,
>
> This is the first time to apply RSU after having a z/VM SSI Cluster
> system successfully built. When I logged on as maint630 and ran
> several commands as shown below:
>
> q disk LABEL VDEV M STAT CYL TYPE BLKSZ FILES BLKS USED-(%)
> BLKS LEFT BLK TOTAL MNT191 191 A R/W 175 3390 4096 36
> 242-01 31258 31500 MNT5E6 5E6 B R/W 9 3390 4096
> 134 1304-80 316 1620 MNT500 500 C R/W 1200
> 3390 4096 1 97057-45 118943 216000 MNT51D 51D D
> R/W 26 3390 4096 297 1823-39 2857 4680
> PMT551 551 E R/W 40 3390 4096 10 119-02 7081
> 7200 MNT190 190 S R/O 207 3390 4096 696 18085-49
> 19175 37260 MNT19E 19E Y/S R/O 500 3390 4096 1124
> 30404-34 59596 90000 Ready; T=0.01/0.01 20:16:42
>
> listf * * c 6302RSU1 SERVLINK C1
>
> The Maint630.500 has already been 45% full. I uploaded just one RSU
> (RPTF01 servlink) and both of them occupied 79% full. Attempted to run
> this "deterse RPTF01 SERVLINK C = = = (replace" command and the disk
> 500 was full.
>
> I would like to know whether the 630RSU1 servlink file can be deleted
> to free up more space for detersing. Thanks, Ray
>
>
>
> ----------------------------------------- The information contained in
> this e-mail, including any attachment(s), is intended solely for use
> by the named addressee(s). If you are not the intended recipient, or
> a person designated as responsible for delivering such messages to the
> intended recipient, you are not authorized to disclose, copy,
> distribute or retain this message, in whole or in part, without
> written authorization from PSEG. This e-mail may contain proprietary,
> confidential or privileged information. If you have received this
> message in error, please notify the sender immediately. This notice is
> included in all e-mail messages leaving PSEG. Thank you for your
> cooperation.
>
> ----------------------------------------------------------------------
>
>
For LINUX-390 subscribe / signoff / archive access instructions,
> send email to lists...@vm.marist.edu with the message: INFO LINUX-390
> or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
> ----------------------------------------------------------------------
>
>
For more information on Linux on System z, visit
> http://wiki.linuxvm.org/
>
--
Dave Jones
V/Soft Software
www.vsoft-software.com
Houston, TX
281.578.7544
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions, send email to
lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit http://wiki.linuxvm.org/
-----------------------------------------
The information contained in this e-mail, including any attachment(s), is
intended solely for use by the named addressee(s). If you are not the intended
recipient, or a person designated as responsible for delivering such messages
to the intended recipient, you are not authorized to disclose, copy, distribute
or retain this message, in whole or in part, without written authorization from
PSEG. This e-mail may contain proprietary, confidential or privileged
information. If you have received this message in error, please notify the
sender immediately. This notice is included in all e-mail messages leaving
PSEG. Thank you for your cooperation.
-----------------------------------------
The information contained in this e-mail, including any attachment(s), is
intended solely for use by the named addressee(s). If you are not the intended
recipient, or a person designated as responsible for delivering such messages
to the intended recipient, you are not authorized to disclose, copy, distribute
or retain this message, in whole or in part, without written authorization from
PSEG. This e-mail may contain proprietary, confidential or privileged
information. If you have received this message in error, please notify the
sender immediately. This notice is included in all e-mail messages leaving
PSEG. Thank you for your cooperation.
