I am running SLES 12 (base install - no maintenance) as a guest under z/VM 6.3 
non-SSI mainly to play with SLES 12 and identify the differences between it and 
SLES 11 SP3.  Not that it matters, but this is a sandbox z/VM that has no 
access to the internet so I can't easily obtain and install maintenance.

Almost immediately installing SLES 12 I created a LV using the btrfs filesystem 
on a single 3390-9 - the filesystem utilizes all of the space.  After creating 
the LVM, I created the entry in /etc/fstab and mounted it using 'mount -a'.  I 
worked on the system for a while and then decided to reboot.  My system went 
into recovery mode as my new filesystem could not be found at boot time.  
Luckily, I has saved a copy of fstab and was able to save the exist fstab as 
fstab.new and copied the backup copy to fstab.

When I rebooted I was able to bring up the full system and logged in with 
PuTTY.  The output of the lvdisplay command shows the LV Status as 'NOT 
available'.  I issued 'vgchange -ay' and  the lvdisplay output showed the 
status as 'available'.   If I reboot the system the LVM is again marked 'NOT 
available'.

I never had this problem with earlier SLES versions, 'vgchange -ay' resolved 
the problem permanently.  What do I need to do to force the LV to be available 
after every reboot in SLES 12?


LV and fstab setup:
I created the LV using the following commands (via PuTTY):
pvcreate /dev/dasdd1
vgcreate sysg1 /dev/dasdd1
lvcreate -l 1760 -n system-lv1 sysg1
mkfs.btrfs /dev/sysg1/system-lv1

I obtained the 1760 in the lvcreate command from the 'Total PE' value as output 
from command 'vgdisplay sysg1' .

I then updated /etc/fstab (after copying fstab to fstab.orig).  I wanted to 
mount this new filesystem at /srv to eventually serve as a repository for the 
SLES 12 DVD1 iso file.  I edited fstab to add:
/dev/sysg1/system-lv1                     /srv/ftp/repository  btrfs      
defaults              0 0


Harley


HARLEY LINKER JR.
Sr. Systems Programmer (z/Linux, z/OS, z/VM)

[Acxiom_IT_color]

Acxiom Corporation
EML   [email protected]<mailto:[email protected]>
TEL    +1 630.944.5111
3333 Finley Road, 8th Floor - NW, Downers Grove, IL, 60515, USA
www.acxiomit.com<http://www.acxiomit.com/>


[Friend Us on Facebook]<http://www.facebook.com/acxiomcorp>  [Link Us on 
LinkedIn] <http://www.linkedin.com/groupRegistration?gid=2901735>   [Follow Us 
on Twitter] <http://twitter.com/acxiom>


***************************************************************************
The information contained in this communication is confidential, is
intended only for the use of the recipient named above, and may be legally
privileged.

If the reader of this message is not the intended recipient, you are
hereby notified that any dissemination, distribution or copying of this
communication is strictly prohibited.

If you have received this communication in error, please resend this
communication to the sender and delete the original message or any copy
of it from your computer system.

Thank You.
****************************************************************************

----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/

Reply via email to