Also see a SUBCONFIG with LINK statements following it..
Is this where the NICDEF belongs ??
and can each NICDEF I have to be defined F800,F900 so on go there in the
one SUBCONFIG or one NICDEF in each of the TCPIP-1 / -2 /-3 -4 ?? this
seems to be all new here for this rel 6.3 ?
----- Forwarded by Ron Wells/AGFS/AGFin on 01/19/2015 10:36 AM -----
From: Ron Wells <ron.we...@springleaf.com>
To: LINUX-390@VM.MARIST.EDU
Date: 01/19/2015 10:19 AM
Subject: Re: VSWITCH for z/vm tcpip
Sent by: Linux on 390 Port <LINUX-390@VM.MARIST.EDU>
ok---it is working after I added the ATTACH
but I gather this is F800(example) is running through OSA only not the
VSWITCH..
I did find where the old 5.4 had the NICDEF in the USER DIRECT file
The Cook book I am looking at has the steps to set the OSA addr to the
VSWITCH >> BUT
questions
it shows setting up for one(1) OSA port using addr of 2100 and changing to
virt addr of 600 ?? is that necessary ? Reason I ask it looks like old
setup it was not done that way. the F800 was used on the define.
Next is it says to do a COMMAND SET VSWITCH VSW1 GRANT &USERID
COMMAND DEFINE NIC 600 TYPE
QDIO
COMMAND COUPLE 600 to SYSTEM
VSW1
Gather the above are VM commands and have to be performed for each OSA set
of addresses ??
F800 = 600 F900=601 FC00=602 FD=603
Am I getting it or way off??
From: Alan Altmark <alan_altm...@us.ibm.com>
To: LINUX-390@VM.MARIST.EDU
Date: 01/16/2015 01:14 PM
Subject: Re: VSWITCH for z/vm tcpip
Sent by: Linux on 390 Port <LINUX-390@VM.MARIST.EDU>
On Friday, 01/16/2015 at 01:56 EST, Ron Wells <ron.we...@springleaf.com>
wrote:
> ?? I logged int as tcpmaint
> did > x system dtcparms d
> below is what was there
> >>
> .**********************************************************************
> .* SYSTEM DTCPARMS created by DTCIPWIZ EXEC on 19 Jan 2009
> .* Configuration program run by MAINT at 15:43:10
> .**********************************************************************
> :nick.TCPIP :type.server
> :class.stack
> * * * End of File * * *
>
> I added the :attach.F800-F804 >> it worked..
> >>
> also the OSA's are online
You need to look in PROFILE TCPIP to see what device numbers you require.
If you want TCPIP to use a VSWITCH, you will need NICDEFs to provide the
connection to the VSWITCH, or you could use a :vnic. tag in SYSTEM
DTCPARMS.
If it's using device number F800, then you can have a NICDEF F800 to
replace the OSA. You only need F800-F803. F804 isn't needed.
But when you say "it" worked, are you talking about TCPIP or the VSWITCH?
TCPIP has no effect on VSWITCH operation.
Alan Altmark
Senior Managing z/VM and Linux Consultant
Lab Services System z Delivery Practice
IBM Systems & Technology Group
ibm.com/systems/services/labservices
office: 607.429.3323
mobile; 607.321.7556
alan_altm...@us.ibm.com
IBM Endicott
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
----------------------------------------------------------------------
Email Disclaimer
This E-mail contains confidential information belonging to the
sender, which may be legally privileged information. This information is
intended only for the use of the individual or entity addressed above.
If you are not the intended recipient, or an employee or agent
responsible for delivering it to the intended recipient, you are hereby
notified that any disclosure, copying, distribution, or the taking of any
action in reliance on the contents of the E-mail or attached files is
strictly prohibited.
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or
visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
----------------------------------------------------------------------
Email Disclaimer
This E-mail contains confidential information belonging to the sender,
which may be legally privileged information. This information is intended
only for the use of the individual or entity addressed above. If you are not
the intended recipient, or an employee or agent responsible for
delivering it to the intended recipient, you are hereby notified that any
disclosure, copying, distribution, or the taking of any action in reliance on
the contents of the E-mail or attached files is strictly prohibited.
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
