What do you have for all the configuration variables that start with PW_ in your CONFIG99 DATADVH file? The expire days should be set by PW_INTERVAL_FOR_SET= according to the documentation. I'm guessing it is not the default value or at least greater than zero.
But - you say you also have RACF. In that case, forget all of the PW_ settings because RACF is the one that will be managing the passwords. You set the password change interval, etc. using the RAC SETROPTS (set RACF options) command. On Mon, Oct 5, 2015 at 11:00 AM, Shumate, Scott <scshum...@bbandt.com> wrote: > I'm in the process of setting up DIRMAINT AND RACF to work together so we > can exploit SMAPI. I'm using redbook The Virtualization Cookbook for IBM z > Systems > Volume 1: IBM z/VM 6.3 to configure it. I'm on section 8.3. When I run > the command to add the server, I get the following error. > > > DVHREQ2288I Your ADD request for LXTEST2 at * has been accepted. > DVHPWU3376E Days can not exceed the current password expire value of 0 > DVHPWU3376E for user LXTEST2. > DVHADD3212E Unexpected RC= 3376, from: EXEC DVHSTPWC ADD LXTEST2 CONFIG > DVHREQ2289E Your ADD request for LXTEST2 at * has failed; with RC = > DVHREQ2289E 3212. > > What am I missing? I did comment out PW_INTERVAL_FOR_GEN= 0 0 in my > config99 datadvh file but still get this error. > > Thanks > Scott > > > > The information in this transmission may contain proprietary and > non-public information of BB&T or its affiliates and may be subject to > protection under the law. The message is intended for the sole use of the > individual or entity to which it is addressed. If you are not the intended > recipient, you are notified that any use, distribution or copying of the > message is strictly prohibited. If you received this message in error, > please delete the material from your system without reading the content and > notify the sender immediately of the inadvertent transmission. > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > -- Bruce Hayden z/VM and Linux on z Systems ATS IBM, Endicott, NY ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/