long shot but, does below do anything? ssh -t user@x.x.x.x bash -ix
Besides that, All filesystems are RW and they are not out of space? does home directory have proper rights? You probably would see errors in /var/log/messeges but better double check Gregory 2016-05-26 7:45 GMT-04:00 van Sleeuwen, Berry <berry.vansleeu...@atos.net>: > Hi Michael, > > I tried, but that didn't help me any further. > > ... > debug1: session_by_channel: session 0 channel 0 > debug1: session_input_channel_req: session 0 req shell > debug1: Setting controlling tty using TIOCSCTTY. > debug1: Received SIGCHLD. > debug1: session_by_pid: pid 2227 > debug1: session_exit_message: session 0 channel 0 pid 2227 > debug1: session_exit_message: release channel 0 > debug1: session_pty_cleanup: session 0 release /dev/pts/0 > debug1: session_by_channel: session 0 channel 0 > debug1: session_close_by_channel: channel 0 child 0 > debug1: session_close: session 0 pid 0 > debug1: channel 0: free: server-session, nchannels 1 > Received disconnect from 10.193.116.43: 11: disconnected by user > debug1: do_cleanup > debug1: PAM: cleanup > debug1: PAM: closing session > debug1: PAM: deleting credentials > > Met vriendelijke groet/With kind regards/Mit freundlichen Grüßen, > Berry van Sleeuwen > > > -----Original Message----- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > Michael MacIsaac > Sent: Thursday, May 26, 2016 1:27 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Unable to login with ssh > > Berry, > > Did you try turning debug on for sshd? I find you get a lot more > information debugging from the server side than the client (and this makes > sense for security reasons). > > On a SLES system, in the file /etc/sysconfig/ssh, I add a '-d' to : > > SSHD_OPTS="-d" > > Then "service restart sshd". You should immediately see debug info on the > console. > > Hope this helps > > -Mike M > > On Thu, May 26, 2016 at 7:14 AM, van Sleeuwen, Berry < > berry.vansleeu...@atos.net> wrote: > > > Hi Rick, > > > > I can logon on the VM console so I expect the shell and various > > profiles should be ok. > > > > It's (almost) the same when I logon through ssh with another userid. > > > > Password: > > debug2: input_userauth_info_req > > debug2: input_userauth_info_req: num_prompts 0 > > debug1: Authentication succeeded (keyboard-interactive). > > Authenticated to x.x.x.x ([x.x.x.x]:22). > > debug1: channel 0: new [client-session] > > debug2: channel 0: send open > > debug1: Requesting no-more-sessi...@openssh.com > > debug1: Entering interactive session. > > Write failed: Broken pipe > > > > Met vriendelijke groet/With kind regards/Mit freundlichen Grüßen, > > Berry van Sleeuwen > > > > -----Original Message----- > > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of > > Rick Troth > > Sent: Thursday, May 26, 2016 12:36 PM > > To: LINUX-390@VM.MARIST.EDU > > Subject: Re: Unable to login with ssh > > > > Bad shell? (exits right away) > > > > Can you sign on with a different ID? > > > > Check your .profile, .bashrc, and their equiv under /etc. > > > > Try the virtual console if you can't do these "checks" from another ID. > > > > I might also suggest looking into the ciphers available (which *have* > > changed recently), but since it shows "last login" that's probably not > > the problem. > > > > -- R; <>< > > > > > > On May 26, 2016 5:07 AM, "van Sleeuwen, Berry" > > <berry.vansleeu...@atos.net > > > > > wrote: > > > > > Hi All, > > > > > > I try to login to a SLES10 linux guest. It looks like the login is > > > correct but right after that the session is closed. I have tried to > > > ssh from another linux guest, with trace options. But it is still > > > unclear to me why the session is aborted. I have tried to find some > > > clues in various locations but a lot of those solutions are either > > > not applicable or do not help to solve the issue. > > > > > > Why would this session be closed and how can I fix this? > > > > > > <BVS: Removed the start of the trace, check of various keys and > > > cyphers> > > > Password: > > > debug3: packet_send2: adding 32 (len 20 padlen 12 extra_pad 64) > > > debug2: input_userauth_info_req > > > debug2: input_userauth_info_req: num_prompts 0 > > > debug3: packet_send2: adding 48 (len 10 padlen 6 extra_pad 64) > > > debug1: Authentication succeeded (keyboard-interactive). > > > Authenticated to x.x.x.x ([y.y.y.y]:22). > > > > > > <BVS: So looks like I am granted access > > > > <BVS: removed environment records…> > > > <BVS: the following 6 records are similar to a successful login, > > > after that the session close starts> > > > > > > debug2: channel 0: open confirm rwindow 0 rmax 32768 > > > debug2: channel_input_status_confirm: type 99 id 0 > > > debug2: PTY allocation request accepted on channel 0 > > > debug2: channel 0: rcvd adjust 2097152 > > > debug2: channel_input_status_confirm: type 99 id 0 > > > debug2: shell request accepted on channel 0 > > > debug1: client_input_channel_req: channel 0 rtype exit-signal reply > > > 0 > > > debug1: client_input_channel_req: channel 0 rtype e...@openssh.com > > > reply 0 > > > debug2: channel 0: rcvd eow > > > debug2: channel 0: close_read > > > debug2: channel 0: input open -> closed > > > debug2: channel 0: rcvd eof > > > debug2: channel 0: output open -> drain > > > debug2: channel 0: rcvd close > > > debug3: channel 0: will not send data after close Last login: Thu > > > May > > > 26 10:37:40 2016 from xxx.xxx.xxx.xxx > > > > > > <BVS: The last login was the previous time I tried. So indeed the > > > login is accepted and logged.) > > > > > > debug3: channel 0: will not send data after close > > > debug2: channel 0: obuf empty > > > debug2: channel 0: close_write > > > debug2: channel 0: output drain -> closed > > > debug2: channel 0: almost dead > > > debug2: channel 0: gc: notify user > > > debug2: channel 0: gc: user detached > > > debug2: channel 0: send close > > > debug2: channel 0: is dead > > > debug2: channel 0: garbage collecting > > > debug1: channel 0: free: client-session, nchannels 1 > > > debug3: channel 0: status: The following connections are open: > > > #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1) > > > > > > Connection to y.y.y.y closed. > > > Transferred: sent 3096, received 2392 bytes, in 0.0 seconds Bytes > > > per > > > second: sent 2010460.6, received 1553301.6 > > > debug1: Exit status -1 > > > > > > > > > Met vriendelijke groet/With kind regards/Mit freundlichen Grüßen, > > > Berry van Sleeuwen Flight Forum 3000 5657 EW Eindhoven • +31 (0)6 > > > 22564276 [cid:image001.jpg@01CE3508.E10AE080] > > > [cid:image002.jpg@01CE3508.E10AE080] > > > > > > > > > This e-mail and the documents attached are confidential and intended > > > solely for the addressee; it may also be privileged. If you receive > > > this e-mail in error, please notify the sender immediately and > > > destroy it. As its integrity cannot be secured on the Internet, > > > Atos’ liability cannot > > be > > > triggered for the message content. Although the sender endeavours to > > > maintain a computer virus-free network, the sender does not warrant > > > that this transmission is virus-free and will not be liable for any > > > damages resulting from any virus transmitted. On all offers and > > > agreements under which Atos Nederland B.V. supplies goods and/or > > > services of whatever nature, the Terms of Delivery from Atos Nederland > B.V. exclusively apply. > > > The Terms of Delivery shall be promptly submitted to you on your > request. > > > > > > > ---------------------------------------------------------------------- > > For LINUX-390 subscribe / signoff / archive access instructions, send > > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > > visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > ---------------------------------------------------------------------- > > For more information on Linux on System z, visit > > http://wiki.linuxvm.org/ This e-mail and the documents attached are > > confidential and intended solely for the addressee; it may also be > > privileged. If you receive this e-mail in error, please notify the > > sender immediately and destroy it. As its integrity cannot be secured > > on the Internet, Atos’ liability cannot be triggered for the message > > content. Although the sender endeavours to maintain a computer > > virus-free network, the sender does not warrant that this transmission > > is virus-free and will not be liable for any damages resulting from > > any virus transmitted. On all offers and agreements under which Atos > > Nederland B.V. supplies goods and/or services of whatever nature, the > > Terms of Delivery from Atos Nederland B.V. exclusively apply. > > The Terms of Delivery shall be promptly submitted to you on your request. > > > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit http://wiki.linuxvm.org/ > This e-mail and the documents attached are confidential and intended > solely for the addressee; it may also be privileged. If you receive this > e-mail in error, please notify the sender immediately and destroy it. As > its integrity cannot be secured on the Internet, Atos’ liability cannot be > triggered for the message content. Although the sender endeavours to > maintain a computer virus-free network, the sender does not warrant that > this transmission is virus-free and will not be liable for any damages > resulting from any virus transmitted. On all offers and agreements under > which Atos Nederland B.V. supplies goods and/or services of whatever > nature, the Terms of Delivery from Atos Nederland B.V. exclusively apply. > The Terms of Delivery shall be promptly submitted to you on your request. > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
