Even stranger, I rearranged them in the VM directory for grins Was: COMMAND DEFINE VFB-512 FF00 500000 COMMAND DEFINE VFB-512 FF01 1000000 COMMAND DEFINE VFB-512 FF02 2000000 COMMAND DEFINE VFB-512 FF03 4000000
Now COMMAND DEFINE VFB-512 FF03 4000000 COMMAND DEFINE VFB-512 FF00 500000 COMMAND DEFINE VFB-512 FF01 1000000 COMMAND DEFINE VFB-512 FF02 2000000 And now i have FF00 and FF01 working and not 2 and 3 Weird timing thing? -----Original Message----- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Marcy Cortes Sent: Wednesday, August 10, 2016 10:12 AM To: LINUX-390@VM.MARIST.EDU Subject: [LINUX-390] vdisk swap in sles 12 Working on VDISK in sles 12. We've always just run a /etc/init.d/boot.local on sles 11 but I decided to try it the cookbook way. I have 4 disks. Only FF00 and FF02 show up, but swapon -a later will bring the other 2 online. This is in /etc/fstab /dev/disk/by-path/ccw-0.0.ff00-part1 swap swap pri=4 0 0 /dev/disk/by-path/ccw-0.0.ff01-part1 swap swap pri=3 0 0 /dev/disk/by-path/ccw-0.0.ff02-part1 swap swap pri=2 0 0 /dev/disk/by-path/ccw-0.0.ff03-part1 swap swap pri=1 0 0 Right after boot zlnx169:~ # swapon NAME TYPE SIZE USED PRIO /dev/dasdd1 partition 976.6M 0B 2 /dev/dasda1 partition 244.1M 0B 4 They are OK, since swapon -a will bring them on zlnx169:~ # swapon -a zlnx169:~ # swapon NAME TYPE SIZE USED PRIO /dev/dasdd1 partition 976.6M 0B 2 /dev/dasda1 partition 244.1M 0B 4 /dev/dasdc1 partition 488.3M 0B 3 /dev/dasdf1 partition 1.9G 0B 1 here are the relevant messages from journalctl Aug 10 11:55:32 zlnx169 systemd[1]: Found device /dev/disk/by-path/ccw-0.0.ff02-part1. Aug 10 11:55:32 zlnx169 systemd[1]: Activating swap /dev/disk/by-path/ccw-0.0.ff02-part1... Aug 10 11:55:32 zlnx169 systemd[1]: Starting LVM2 PV scan on device 94:33... Aug 10 11:55:32 zlnx169 systemd[1]: Starting LVM2 PV scan on device 94:37... Aug 10 11:55:32 zlnx169 systemd[1]: Found device /dev/disk/by-path/ccw-0.0.ff03-part1. Aug 10 11:55:32 zlnx169 systemd[1]: Activating swap /dev/disk/by-path/ccw-0.0.ff03-part1... Aug 10 11:55:32 zlnx169 systemd[1]: Starting LVM2 PV scan on device 94:25... Aug 10 11:55:32 zlnx169 swapon[3349]: swapon: /dev/dasdf1: read swap header failed: Success Aug 10 11:55:32 zlnx169 kernel: Adding 999992k swap on /dev/dasdd1. Priority:2 extents:1 across:999992k Aug 10 11:55:32 zlnx169 kernel: Adding 249992k swap on /dev/dasda1. Priority:4 extents:1 across:249992k Aug 10 11:55:32 zlnx169 systemd[1]: Activated swap /dev/disk/by-path/ccw-0.0.ff02-part1. Aug 10 11:55:32 zlnx169 systemd[1]: dev-disk-by\x2dpath-ccw\x2d0.0.ff03\x2dpart1.swap swap process exited, code=exited status=255 Aug 10 11:55:32 zlnx169 systemd[1]: Failed to activate swap /dev/disk/by-path/ccw-0.0.ff03-part1. Aug 10 11:55:32 zlnx169 systemd[1]: Dependency failed for Swap. Aug 10 11:55:32 zlnx169 systemd[1]: Unit dev-disk-by\x2dpath-ccw\x2d0.0.ff03\x2dpart1.swap entered failed state. Aug 10 11:55:32 zlnx169 systemd[1]: Found device /dev/disk/by-path/ccw-0.0.ff00-part1. Aug 10 11:55:32 zlnx169 systemd[1]: Activating swap /dev/disk/by-path/ccw-0.0.ff00-part1... Aug 10 11:55:32 zlnx169 systemd-sysctl[3366]: Overwriting earlier assignment of kernel/sem in file '/etc/sysctl.d/99-sysctl.conf'. Aug 10 11:55:32 zlnx169 systemd[1]: Activated swap /dev/disk/by-path/ccw-0.0.ff00-part1. Aug 10 11:55:32 zlnx169 systemd[1]: Starting LVM2 PV scan on device 94:17... Aug 10 11:55:32 zlnx169 systemd[1]: Starting LVM2 metadata daemon... Aug 10 11:55:32 zlnx169 systemd[1]: Started LVM2 metadata daemon. Aug 10 11:55:32 zlnx169 systemd-udevd[2006]: remove old symlink, '/dev/disk/by-uuid/16795452-83d8-4b67-9a28-1e55947d9367' no longer belonging to '/devices/cs Aug 10 11:55:32 zlnx169 systemd[1]: Found device /dev/disk/by-path/ccw-0.0.ff01-part1. Aug 10 11:55:32 zlnx169 systemd[1]: Activating swap /dev/disk/by-path/ccw-0.0.ff01-part1... Aug 10 11:55:32 zlnx169 systemd[1]: dev-disk-by\x2dpath-ccw\x2d0.0.ff01\x2dpart1.swap swap process exited, code=exited status=255 Aug 10 11:55:32 zlnx169 systemd[1]: Failed to activate swap /dev/disk/by-path/ccw-0.0.ff01-part1. Aug 10 11:55:32 zlnx169 systemd[1]: Unit dev-disk-by\x2dpath-ccw\x2d0.0.ff01\x2dpart1.swap entered failed state. Aug 10 11:55:32 zlnx169 swapon[3375]: swapon: /dev/disk/by-path/ccw-0.0.ff01-part1: swapon failed: Invalid argument I may go back to the script. But now I'm just too puzzled :) How do i figure out what a 255 is? Marcy This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation. ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/