Quoting Mark Post <[email protected]>:
On 8/19/21 6:34 PM, Marcy Cortes wrote:
Thanks for the heads up Aria!
We have a lot of them that upgraded from 12 to Sp1, then sp2, and
now SP3 is being tested. Many have the 41's and 51's.
We'll look for this and report it if it happens here too.
Rather than wait for disaster to happen, it may be better to be
proactive. For each device that is currently active, but there is no
41-* rule for it, using "chzdev -e -p" will create one. For DASD
devices, pretty much the only other thing you would need to worry about
is whether it should be defined with use_diag=1 or not. "lsdasd | grep
-i diag" will show you all of those.
This is interesting. On a SLES12-SP5 system I have, there are no 41 rules and
only 51 rules. All disks are online and server boots without a
problem. Yet on
this system, when I issue lszdev command, it lists all of the disks
but ore the persistent
column it lists 'no' for all of them. Clearly not the case!
Aria
Mark Post
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO
LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390
