Hi,
When I login with guest id it shows the vswitch are connected but when boot
up the red-hat it fails with device not ready
00: Command complete
00: Command complete
00: Command complete
00: NIC 0640 is created; devices 0640-0642 defined
00: NIC 0640 is connected to VSWITCH SYSTEM VSW1
00: Command complete
00: NIC 0740 is created; devices 0740-0742 defined
00: NIC 0740 is connected to VSWITCH SYSTEM VSW2
q vswitch
VSWITCH SYSTEM VSW1 Type: QDIO Connected: 2 Maxconn: INFINITE
PERSISTENT RESTRICTED ETHERNET Accounting: OFF
USERBASED LOCAL
VLAN Unaware
MAC address: 02-00-0C-00-00-01 MAC Protection:
Unspecified
IPTimeout: 5 QueueStorage: 8
Isolation Status: OFF VEPA Status:
OFF
Uplink
Port:
State: Device not ready
PMTUD setting: EXTERNAL PMTUD value: 65535 Trace Pages:
8
RDEV: 0516.P00 VDEV: 08FD Controller: DTCVSW1 Error: Not
ready
Adapter ID:
390700010E58.0114
EQID:
OSA1SET1
Status: Suspended Reason: Port
inoperable
RDEV: 0616.P00 VDEV: NONE Controller: NONE Error:
Detached
Adapter ID:
390700010E58.0134
EQID:
OSA1SET1
SWITCH SYSTEM VSW2 Type: QDIO Connected: 1 Maxconn:
INFINITE
PERSISTENT RESTRICTED ETHERNET Accounting:
OFF
USERBASED
LOCAL
VLAN Unaware
MAC address: 02-00-0C-00-00-02 MAC Protection:
Unspecified
IPTimeout: 5 QueueStorage:
8
Isolation Status: OFF VEPA Status:
OFF
Uplink
Port:
State: Defined
PMTUD setting: EXTERNAL PMTUD value: 65535 Trace Pages: 8
Ready; T=0.01/0.01 22:15:32
On Sun, Aug 7, 2022 at 8:44 PM Peter <dbajava...@gmail.com> wrote:
> Hello,
>
> I have replicated all the LUN ID of my Redhat Linux image from the
> production site to the DR site.
>
> When i boot up i am getting the below error
>
> Starting dracut cmdline
> hook...
>
> 1.502438م systemdم1ل: systemd-modules-load.service: main process
> exited, co
>
> e=exited,
> status=1/FAILURE
>
> 31;1لmFAILED 0لmم Failed to start Load Kernel
> Modules.
>
> ee 'systemctl status systemd-modules-load.service' for
> details.
>
> 1.502597م systemdم1ل: Failed to start Load Kernel
> Modules.
>
> 1.502603م systemdم1ل: Unit systemd-modules-load.service entered
> failed stat
>
>
> .
>
> 1.514959م systemdم1ل: systemd-modules-load.service
> failed.
>
>
>
>
>
>
>
> Starting Job spooling tools...
>
>
> Starting Terminate Plymouth Boot
> Screen...
>
> 32ل لm OK 0لmم Started NTP
> client/server.
>
> م17.169442 ل IPv6: ADDRCONF(NETDEV_UP): enccw0.0.0640: link is not ready
>
>
>
> Is there any place I need to be looking at ?
>
>
> Redhat : 8.2
>
>
> Regards,
>
> Peter
>
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit
http://www2.marist.edu/htbin/wlvindex?LINUX-390
