I have relocated the VMLINK project to ...
*https://github.com/trothtech/vmlink/* (The original GH project is not going away.) The primary reason for this was to update it so that it's easy to generate an RPM. But the project is primarily just the one file which was written by Rushal Verma as a Linux Foundation internship project. It works. It's easy. You should get it and enable it. There is an RPM available from ... *http://casita.net/arc/vmlink/vmlink-2.1-1.s390x.rpm* Naturally, it requires the automounter. The "VMLINK automounter" is just the script. As implied, it tries to mimic (via the automounter) the behavior of the 'vmlink' command in CMS. In all honesty, one hardly needs an RPM. (But some might like the inventory aspect.) All that is needed is the one script. The heavy lifting is then done by the automounter, which is standard equipment. *https://github.com/trothtech/vmlink/blob/main/etc/auto.vmlink* Enjoy! -- R; <>< ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www2.marist.edu/htbin/wlvindex?LINUX-390
