On Tue, 21 Mar 2000, Roeland Th. Jansen wrote:
> as I recently started to get weird crashes with seti, Idecided to add
> lmsensors to 2.2.14
>
> the result is weird for VCORE 2 :
>
>
> w83782d-i2c-0-2d
> Adapter: SMBus PIIX4 adapter at 5000
> Algorithm: Non-I2C SMBus adapter
> VCore 1: +2.00 V (min = +1.80 V, max = +2.20 V)
> VCore 2: +1.47 V (min = +1.80 V, max = +2.20 V) <----
> +3.3V: +3.32 V (min = +2.97 V, max = +3.63 V)
> +5V: +5.17 V (min = +4.50 V, max = +5.48 V)
> +12V: +11.78 V (min = +10.79 V, max = +13.11 V)
> -12V: -11.62 V (min = -13.21 V, max = -10.90 V)
> -5V: -5.20 V (min = -5.51 V, max = -4.51 V)
> V5SB: +5.16 V (min = +4.50 V, max = +5.48 V)
> VBat: +2.04 V (min = +2.70 V, max = +3.29 V)
> fan1: 0 RPM (min = 3000 RPM, div = 2)
> fan2: 0 RPM (min = 3000 RPM, div = 2)
> fan3: 0 RPM (min = 3000 RPM, div = 2)
> temp1: +34 C (limit = +60 C, hysteresis = +50 C, sensor = thermistor)
> temp2: +35.5 C (limit = +60.0 C, hysteresis = +50.0 C, sensor = thermistor)
>
> temp3: +42.0 C (limit = +60.0 C, hysteresis = +50.0 C, sensor = thermistor)
>
> vid: +2.00 V
> alarms: Chassis intrusion detection
> beep_enable:
> Sound alarm disabled
>
> w83782d-isa-0290
> Adapter: ISA adapter
> Algorithm: ISA algorithm
> VCore 1: +2.01 V (min = +1.80 V, max = +2.20 V)
> VCore 2: +1.50 V (min = +1.80 V, max = +2.20 V) <----
> +3.3V: +3.34 V (min = +2.97 V, max = +3.63 V)
> +5V: +5.21 V (min = +4.50 V, max = +5.48 V)
> +12V: +11.89 V (min = +10.79 V, max = +13.11 V)
> -12V: -11.62 V (min = -13.21 V, max = -10.90 V)
> -5V: -5.20 V (min = -5.51 V, max = -4.51 V)
> V5SB: +5.12 V (min = +4.50 V, max = +5.48 V)
> VBat: +2.04 V (min = +2.70 V, max = +3.29 V)
> fan1: 0 RPM (min = 3000 RPM, div = 2)
> fan2: 0 RPM (min = 3000 RPM, div = 2)
> fan3: 0 RPM (min = 3000 RPM, div = 2)
> temp1: +34 C (limit = +60 C, hysteresis = +50 C, sensor = thermistor)
> temp2: +35.5 C (limit = +60.0 C, hysteresis = +50.0 C, sensor = thermistor)
>
> temp3: +42.5 C (limit = +60.0 C, hysteresis = +50.0 C, sensor = thermistor)
>
> vid: +2.00 V
> alarms: Chassis intrusion detection
> beep_enable:
> Sound alarm disabled
>
>
> am I crazy or what ?
No :-) in1 (by default, VCore 2) and in8 (by default, vid) need to be
swapped in sensors.conf. I vaguely remember seeing a report that QQ
fixed this but I didn't see any change after flashing.
Cheers,
K.
--
=- To unsubscribe, email [EMAIL PROTECTED] with the -=
=- body of "unsubscribe linux-abit". -=
