Set fake hid for non-PNPID ACPI devices.
We do this mainly because:
1. hid is used to match ACPI devices and drivers.
.match method which is incompatible to driver model
can be deleted from acpi_driver.ops then.
2. As the .uevent method mark ACPI drivers by PNPID,
fake hid is set to non-PNPID devices so that udev script
can load the right ACPI driver by looking for
"HWID = " or "COMPTID = ".
Signed-off-by: Zhang Rui <[EMAIL PROTECTED]>
---
drivers/acpi/pci_bind.c | 20 +-------------
drivers/acpi/scan.c | 59 ++++++++++++++++++++++++++++++++++++++++++--
drivers/acpi/video.c | 37 ---------------------------
include/acpi/acpi_bus.h | 6 ----
include/acpi/acpi_drivers.h | 2 +
5 files changed, 63 insertions(+), 61 deletions(-)
Index: linux-2.6.18/drivers/acpi/pci_bind.c
===================================================================
--- linux-2.6.18.orig/drivers/acpi/pci_bind.c 2006-09-21 16:14:53.000000000
+0800
+++ linux-2.6.18/drivers/acpi/pci_bind.c 2006-09-21 16:15:01.000000000
+0800
@@ -379,32 +379,16 @@ acpi_pci_bind_root(struct acpi_device *d
static int acpi_pci_bridge_add(struct acpi_device *device);
static int acpi_pci_bridge_remove(struct acpi_device *device, int type);
-static int acpi_pci_bridge_match(struct acpi_device *device,
- struct acpi_driver *driver);
+
static struct acpi_driver acpi_pci_bridge_driver = {
.name = ACPI_PCI_BRIDGE_DRIVER_NAME,
+ .ids = ACPI_PCI_BRIDGE_HID,
.ops = {
.add = acpi_pci_bridge_add,
.remove = acpi_pci_bridge_remove,
- .match = acpi_pci_bridge_match,
},
};
-static int acpi_pci_bridge_match(struct acpi_device *device,
- struct acpi_driver *driver)
-{
- acpi_status status;
- acpi_handle handle;
-
- /* pci bridge has _PRT but isn't PNP0A03 */
- status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
- if (ACPI_FAILURE(status))
- return -ENODEV;
- if (!acpi_match_ids(device, "PNP0A03"))
- return -ENODEV;
- return 0;
-}
-
static int acpi_pci_bridge_add(struct acpi_device *device)
{
return acpi_pci_bind(device);
Index: linux-2.6.18/drivers/acpi/scan.c
===================================================================
--- linux-2.6.18.orig/drivers/acpi/scan.c 2006-09-21 16:14:53.000000000
+0800
+++ linux-2.6.18/drivers/acpi/scan.c 2006-09-21 16:15:01.000000000 +0800
@@ -166,8 +166,6 @@ static int acpi_bus_match(struct device
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(drv);
- if (acpi_drv->ops.match)
- return !acpi_drv->ops.match(acpi_dev, acpi_drv);
return !acpi_match_ids(acpi_dev, acpi_drv->ids);
}
@@ -706,6 +704,53 @@ static void acpi_device_get_busid(struct
}
}
+static int
+acpi_video_bus_match(struct acpi_device *device)
+{
+ acpi_handle h_dummy1;
+ acpi_handle h_dummy2;
+ acpi_handle h_dummy3;
+
+
+ if (!device)
+ return -EINVAL;
+
+ /* Since there is no HID, CID for ACPI Video drivers, we have
+ * to check well known required nodes for each feature we support.
+ */
+
+ /* Does this device able to support video switching ? */
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy1)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy2)))
+ return 0;
+
+ /* Does this device able to retrieve a video ROM ? */
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy1)))
+ return 0;
+
+ /* Does this device able to configure which video head to be POSTed ? */
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy1)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy2)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy3)))
+ return 0;
+
+ return -ENODEV;
+}
+
+static int acpi_pci_bridge_match(struct acpi_device *device)
+{
+ acpi_status status;
+ acpi_handle handle;
+
+ /* pci bridge has _PRT but isn't PNP0A03 */
+ status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ if (!acpi_match_ids(device, "PNP0A03"))
+ return -ENODEV;
+ return 0;
+}
+
static void acpi_device_set_id(struct acpi_device *device,
struct acpi_device *parent, acpi_handle handle,
int type)
@@ -736,6 +781,16 @@ static void acpi_device_set_id(struct ac
device->pnp.bus_address = info->address;
device->flags.bus_address = 1;
}
+
+ if(!(info->valid & (ACPI_VALID_HID | ACPI_VALID_CID))){
+ status = acpi_video_bus_match(device);
+ if(ACPI_SUCCESS(status))
+ hid = ACPI_VIDEO_HID;
+
+ status = acpi_pci_bridge_match(device);
+ if(ACPI_SUCCESS(status))
+ hid = ACPI_PCI_BRIDGE_HID;
+ }
break;
case ACPI_BUS_TYPE_POWER:
hid = ACPI_POWER_HID;
Index: linux-2.6.18/drivers/acpi/video.c
===================================================================
--- linux-2.6.18.orig/drivers/acpi/video.c 2006-09-20 11:42:06.000000000
+0800
+++ linux-2.6.18/drivers/acpi/video.c 2006-09-21 16:15:01.000000000 +0800
@@ -65,16 +65,14 @@ MODULE_LICENSE("GPL");
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
-static int acpi_video_bus_match(struct acpi_device *device,
- struct acpi_driver *driver);
static struct acpi_driver acpi_video_bus = {
.name = ACPI_VIDEO_DRIVER_NAME,
.class = ACPI_VIDEO_CLASS,
+ .ids = ACPI_VIDEO_HID,
.ops = {
.add = acpi_video_bus_add,
.remove = acpi_video_bus_remove,
- .match = acpi_video_bus_match,
},
};
@@ -1774,39 +1772,6 @@ static int acpi_video_bus_remove(struct
return 0;
}
-static int
-acpi_video_bus_match(struct acpi_device *device, struct acpi_driver *driver)
-{
- acpi_handle h_dummy1;
- acpi_handle h_dummy2;
- acpi_handle h_dummy3;
-
-
- if (!device || !driver)
- return -EINVAL;
-
- /* Since there is no HID, CID for ACPI Video drivers, we have
- * to check well known required nodes for each feature we support.
- */
-
- /* Does this device able to support video switching ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy1)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy2)))
- return 0;
-
- /* Does this device able to retrieve a video ROM ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy1)))
- return 0;
-
- /* Does this device able to configure which video head to be POSTed ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy1)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy2)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy3)))
- return 0;
-
- return -ENODEV;
-}
-
static int __init acpi_video_init(void)
{
int result = 0;
Index: linux-2.6.18/include/acpi/acpi_drivers.h
===================================================================
--- linux-2.6.18.orig/include/acpi/acpi_drivers.h 2006-09-20
11:42:06.000000000 +0800
+++ linux-2.6.18/include/acpi/acpi_drivers.h 2006-09-21 16:15:01.000000000
+0800
@@ -43,6 +43,8 @@
#define ACPI_BUTTON_HID_POWERF "ACPI_FPB"
#define ACPI_BUTTON_HID_SLEEPF "ACPI_FSB"
+#define ACPI_VIDEO_HID "ACPI_VID"
+#define ACPI_PCI_BRIDGE_HID "ACPI_PCI"
/* --------------------------------------------------------------------------
PCI
--------------------------------------------------------------------------
*/
Index: linux-2.6.18/include/acpi/acpi_bus.h
===================================================================
--- linux-2.6.18.orig/include/acpi/acpi_bus.h 2006-09-21 16:14:05.000000000
+0800
+++ linux-2.6.18/include/acpi/acpi_bus.h 2006-09-21 16:15:01.000000000
+0800
@@ -97,8 +97,6 @@ typedef int (*acpi_op_resume) (struct ac
typedef int (*acpi_op_scan) (struct acpi_device * device);
typedef int (*acpi_op_bind) (struct acpi_device * device);
typedef int (*acpi_op_unbind) (struct acpi_device * device);
-typedef int (*acpi_op_match) (struct acpi_device * device,
- struct acpi_driver * driver);
typedef int (*acpi_op_shutdown) (struct acpi_device * device);
struct acpi_bus_ops {
@@ -112,9 +110,8 @@ struct acpi_bus_ops {
u32 acpi_op_scan:1;
u32 acpi_op_bind:1;
u32 acpi_op_unbind:1;
- u32 acpi_op_match:1;
u32 acpi_op_shutdown:1;
- u32 reserved:20;
+ u32 reserved:21;
};
struct acpi_device_ops {
@@ -128,7 +125,6 @@ struct acpi_device_ops {
acpi_op_scan scan;
acpi_op_bind bind;
acpi_op_unbind unbind;
- acpi_op_match match;
acpi_op_shutdown shutdown;
};
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
