On Tue, 5 Dec 2006 18:03:39 +0000 (GMT) James Simmons wrote:
> This is the pass at a display class to meet the needs of the output class
> of Mr. Yu for acpi. Also this class could in time replace the lcd class
> located in the backlight directory since a lcd is a type of display.
> The final hope is that the purpose auxdisplay could fall under this
> catergory.
>
> P.S
> I know the edid parsing would have to be pulled out of the fbdev layer.
Hi,
Where is "struct display_properties" defined?
CC [M] drivers/acpi/video.o
drivers/acpi/video.c:183: error: field 'acpi_display_properties' has incomplete
type
make[2]: *** [drivers/acpi/video.o] Error 1
Lots of style issues (see below).
> diff -urN -X fbdev-2.6/Documentation/dontdiff linus-2.6/drivers/acpi/video.c
> fbdev-2.6/drivers/acpi/video.c
> --- linus-2.6/drivers/acpi/video.c 2006-11-07 05:38:34.000000000 -0500
> +++ fbdev-2.6/drivers/acpi/video.c 2006-12-04 10:40:48.000000000 -0500
> @@ -30,6 +30,9 @@
> #include <linux/list.h>
> #include <linux/proc_fs.h>
> #include <linux/seq_file.h>
> +#if defined(CONFIG_DISPLAY_DDC)
> +#include <linux/display.h>
> +#endif
>
> #include <asm/uaccess.h>
>
> @@ -154,6 +157,20 @@
> int *levels;
> };
>
> +#if defined(CONFIG_DISPLAY_DDC)
> +static int
> +acpi_display_get_power(struct display_device *dev)
Combine those 2 lines into 1 line.
> +{
> + return 0;
> +}
> +
> +static int
> +acpi_display_set_power(struct display_device *dev)
Ditto.
> +{
> + return 0;
> +}
> +#endif
> +
> struct acpi_video_device {
> unsigned long device_id;
> struct acpi_video_device_flags flags;
> @@ -162,6 +179,10 @@
> struct acpi_video_bus *video;
> struct acpi_device *dev;
> struct acpi_video_device_brightness *brightness;
> +#if defined(CONFIG_DISPLAY_DDC)
> + struct display_properties acpi_display_properties;
> + struct display_device *display;
> +#endif
> };
>
> /* bus */
> @@ -399,6 +420,27 @@
> return status;
> }
>
> +#if defined(CONFIG_DISPLAY_DDC)
> +static void*
> +acpi_display_get_EDID(struct acpi_video_device *dev)
Combine and place '*' immediately before the function name,
not immediately after "void".
> +{
> + union acpi_object *edid = NULL;
> + void *data = NULL;
> + int status;
> +
> + status = acpi_video_device_EDID(dev, &edid, 128);
> + if (ACPI_FAILURE(status))
> + status = acpi_video_device_EDID(dev, &edid, 256);
> +
> + if (ACPI_SUCCESS(status)) {
> + if (edid && edid->type == ACPI_TYPE_BUFFER) {
> + data = edid->buffer.pointer;
No braces for one-statement "blocks".
> + }
> + }
> + return data;
> +}
> +#endif
> +
> /* bus */
>
> static int
> diff -urN -X fbdev-2.6/Documentation/dontdiff
> linus-2.6/drivers/video/display/display-ddc.c
> fbdev-2.6/drivers/video/display/display-ddc.c
> --- linus-2.6/drivers/video/display/display-ddc.c 1969-12-31
> 19:00:00.000000000 -0500
> +++ fbdev-2.6/drivers/video/display/display-ddc.c 2006-12-03
> 05:27:00.000000000 -0500
> @@ -0,0 +1,45 @@
> +/*
> + * display-ddc.c - EDID paring code
typo: parsing
> +#include <linux/module.h>
> +#include <linux/display.h>
> +#include <linux/err.h>
> +#include <linux/ctype.h>
> +
> +#include <linux/fb.h>
> +
> +int probe_edid(struct display_device *dev, void *data)
> +{
> + struct fb_monspecs spec;
> + ssize_t size = 45;
Where does the magic # 45 come from?
Can you use a #define or sizeof(X) for it instead?
> +
> + dev->name = kzalloc(size, GFP_KERNEL);
> + fb_edid_to_monspecs((unsigned char *) data, &spec);
> + strcpy(dev->name, spec.manufacturer);
> + return snprintf(dev->name, size, "%s %s %s\n", spec.manufacturer,
> spec.monitor, spec.ascii);
Try to limit source lines to < 80 columns.
> +}
> +EXPORT_SYMBOL(probe_edid);
> +
> +MODULE_DESCRIPTION("Display Hardware handling");
> +MODULE_AUTHOR("James Simmons <[EMAIL PROTECTED]>");
> +MODULE_LICENSE("GPL");
> diff -urN -X fbdev-2.6/Documentation/dontdiff
> linus-2.6/drivers/video/display/display-sysfs.c
> fbdev-2.6/drivers/video/display/display-sysfs.c
> --- linus-2.6/drivers/video/display/display-sysfs.c 1969-12-31
> 19:00:00.000000000 -0500
> +++ fbdev-2.6/drivers/video/display/display-sysfs.c 2006-12-04
> 07:48:34.000000000 -0500
> @@ -0,0 +1,164 @@
> +#include <linux/module.h>
> +#include <linux/display.h>
> +#include <linux/err.h>
> +#include <linux/ctype.h>
> +
> +struct display_device *display_device_register(struct display_driver *driver,
> + struct device *dev, void
> *devdata)
> +{
> + struct display_device *new_dev;
> + int ret = -ENOMEM, i;
> +
> + if (unlikely(!driver))
> + return ERR_PTR(-EINVAL);
> +
> + new_dev = kzalloc(sizeof(struct display_device), GFP_KERNEL);
> + if (likely(new_dev)) {
> + driver->probe(new_dev, devdata);
> +
> + mutex_init(&new_dev->lock);
> + new_dev->driver = driver;
> + new_dev->class_dev.class = &display_class;
> + new_dev->class_dev.dev = dev;
> + sprintf(new_dev->class_dev.class_id, "display%d", index++);
> + class_set_devdata(&new_dev->class_dev, devdata);
> + ret = class_device_register(&new_dev->class_dev);
> +
> + if (likely(ret)) {
> + for (i = 0; i < ARRAY_SIZE(display_attributes); i++) {
> + ret =
> class_device_create_file(&new_dev->class_dev,
> +
> &display_attributes[i]);
> + if (unlikely(ret)) {
> + while (--i >= 0)
> +
> class_device_remove_file(&new_dev->class_dev,
> +
> &display_attributes[i]);
> +
> class_device_unregister(&new_dev->class_dev);
Several lines > 80 columns there.
> + }
> + }
> + }
> + }
> + if (unlikely(ret)) {
> + printk("failed to register display device\n");
* KERN_ERR or some such printk log level
> + kfree(new_dev);
> + new_dev = ERR_PTR(ret);
> + }
> + return new_dev;
> +}
> +EXPORT_SYMBOL(display_device_register);
> +
> +void display_device_unregister(struct display_device *dev)
> +{
> + int i;
> +
> + if (!dev)
> + return;
> + mutex_lock(&dev->lock);
> + dev->driver = NULL;
> + for (i = 0; i < ARRAY_SIZE(display_attributes); i++)
> + class_device_remove_file(&dev->class_dev,
> + &display_attributes[i]);
> + mutex_unlock(&dev->lock);
> + class_device_unregister(&dev->class_dev);
> +}
> +EXPORT_SYMBOL(display_device_unregister);
> +
> +static void __exit display_class_exit(void)
> +{
> + class_unregister(&display_class);
> +}
> +
> +static int __init display_class_init(void)
> +{
> + return class_register(&display_class);
> +}
> +
> +postcore_initcall(display_class_init);
> +module_exit(display_class_exit);
> +
> +MODULE_DESCRIPTION("Display Hardware handling");
> +MODULE_AUTHOR("James Simmons <[EMAIL PROTECTED]>");
> +MODULE_LICENSE("GPL");
> diff -urN -X fbdev-2.6/Documentation/dontdiff
> linus-2.6/drivers/video/display/Kconfig
> fbdev-2.6/drivers/video/display/Kconfig
> --- linus-2.6/drivers/video/display/Kconfig 1969-12-31 19:00:00.000000000
> -0500
> +++ fbdev-2.6/drivers/video/display/Kconfig 2006-12-04 11:41:03.000000000
> -0500
> @@ -0,0 +1,29 @@
> +#
> +# Display drivers configuration
> +#
> +
> +menu "Display device support"
> +
> +config DISPLAY_SUPPORT
> + tristate "Display panel/monitor support"
> + ---help---
> + This framework adds support for low-level control of a display.
> + This includes support for power.
> +
> + Enable this to be able to choose the drivers for controlling the
> + physical display panel/monitor on some platforms. This not only
> + covers LCD displays for PDAs but also other types of displays
> + such as CRT, TVout etc.
> +
> + To have support for your specific display panel you will have to
> + select the proper drivers which depend on this option.
> +
> +config DISPLAY_DDC
> + tristate "Enable EDID parsing"
> + ---help---
> + Enable EDID parsing
"Enable" makes it sound like a boolean, not a tristate....
> +
> +comment "Display hardware drivers"
> + depends on DISPLAY_SUPPORT
> +
> +endmenu
> diff -urN -X fbdev-2.6/Documentation/dontdiff
> linus-2.6/drivers/video/display/Makefile
> fbdev-2.6/drivers/video/display/Makefile
> --- linus-2.6/drivers/video/display/Makefile 1969-12-31 19:00:00.000000000
> -0500
> +++ fbdev-2.6/drivers/video/display/Makefile 2006-12-03 05:02:07.000000000
> -0500
> @@ -0,0 +1,7 @@
> +# Display drivers
> +
> +display-objs := display-sysfs.o
> +
> +obj-$(CONFIG_DISPLAY_SUPPORT) += display.o
> +
> +obj-$(CONFIG_DISPLAY_DDC) += display-ddc.o
> diff -urN -X fbdev-2.6/Documentation/dontdiff linus-2.6/drivers/video/Kconfig
> fbdev-2.6/drivers/video/Kconfig
> --- linus-2.6/drivers/video/Kconfig 2006-11-30 05:06:13.000000000 -0500
> +++ fbdev-2.6/drivers/video/Kconfig 2006-12-04 10:40:48.000000000 -0500
> @@ -4,21 +4,6 @@
>
> menu "Graphics support"
>
> -config FIRMWARE_EDID
> - bool "Enable firmware EDID"
> - default y
> - ---help---
> - This enables access to the EDID transferred from the firmware.
> - On the i386, this is from the Video BIOS. Enable this if DDC/I2C
> - transfers do not work for your driver and if you are using
> - nvidiafb, i810fb or savagefb.
> -
> - In general, choosing Y for this option is safe. If you
> - experience extremely long delays while booting before you get
> - something on your display, try setting this to N. Matrox cards in
> - combination with certain motherboards and monitors are known to
> - suffer from this problem.
> -
> config FB
> tristate "Support for frame buffer devices"
> ---help---
> @@ -53,6 +38,22 @@
> (e.g. an accelerated X server) and that are not frame buffer
> device-aware may cause unexpected results. If unsure, say N.
>
> +config FIRMWARE_EDID
> + bool "Enable firmware EDID"
> + depends on FB
> + default n
> + ---help---
> + This enables access to the EDID transferred from the firmware.
> + On the i386, this is from the Video BIOS. Enable this if DDC/I2C
> + transfers do not work for your driver and if you are using
> + nvidiafb, i810fb or savagefb.
> +
All of the help text (above & below) should be indented like the
first line above is: one tab + 2 spaces.
> + In general, choosing Y for this option is safe. If you
> + experience extremely long delays while booting before you get
> + something on your display, try setting this to N. Matrox cards in
> + combination with certain motherboards and monitors are known to
> + suffer from this problem.
> +
> config FB_DDC
> tristate
> depends on FB && I2C && I2C_ALGOBIT
---
~Randy
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
