From: Bob Moore <[EMAIL PROTECTED]>
Moved all FADT-related functions to a new file, tbfadt.c.
Eliminated the acpi_hw_initialize function - the
FADT registers are now validated when the table is loaded.
Signed-off-by: Alexey Starikovskiy <[EMAIL PROTECTED]>
Signed-off-by: Len Brown <[EMAIL PROTECTED]>
---
drivers/acpi/hardware/hwacpi.c | 29 -----
drivers/acpi/tables/tbutils.c | 238 +-------------------------------------
drivers/acpi/utilities/utinit.c | 95 ---------------
drivers/acpi/utilities/utxface.c | 14 ---
include/acpi/achware.h | 2 -
include/acpi/actables.h | 9 ++
include/acpi/acutils.h | 2 -
7 files changed, 10 insertions(+), 379 deletions(-)
diff --git a/drivers/acpi/hardware/hwacpi.c b/drivers/acpi/hardware/hwacpi.c
index 14e8111..9c7df71 100644
--- a/drivers/acpi/hardware/hwacpi.c
+++ b/drivers/acpi/hardware/hwacpi.c
@@ -49,34 +49,6 @@ ACPI_MODULE_NAME("hwacpi")
/******************************************************************************
*
- * FUNCTION: acpi_hw_initialize
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Initialize and validate the various ACPI registers defined in
- * the FADT.
- *
-
******************************************************************************/
-acpi_status acpi_hw_initialize(void)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(hw_initialize);
-
- /* Sanity check the FADT for valid values */
-
- status = acpi_ut_validate_fadt();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-
-/******************************************************************************
- *
* FUNCTION: acpi_hw_set_mode
*
* PARAMETERS: Mode - SYS_MODE_ACPI or SYS_MODE_LEGACY
@@ -86,7 +58,6 @@ acpi_status acpi_hw_initialize(void)
* DESCRIPTION: Transitions the system into the requested mode.
*
******************************************************************************/
-
acpi_status acpi_hw_set_mode(u32 mode)
{
diff --git a/drivers/acpi/tables/tbutils.c b/drivers/acpi/tables/tbutils.c
index 6d13737..54e53e6 100644
--- a/drivers/acpi/tables/tbutils.c
+++ b/drivers/acpi/tables/tbutils.c
@@ -48,57 +48,10 @@
ACPI_MODULE_NAME("tbutils")
/* Local prototypes */
-static void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags);
-
-static void acpi_tb_convert_fadt(void);
-
-static void
-acpi_tb_install_table(acpi_physical_address address,
- u8 flags, char *signature, acpi_native_uint table_index);
-
-static void inline
-acpi_tb_init_generic_address(struct acpi_generic_address *new_gas_struct,
- u8 bit_width, u64 address);
-
static acpi_physical_address
acpi_tb_get_root_table_entry(u8 * table_entry,
acpi_native_uint table_entry_size);
-/* Table used for conversion of FADT to common format */
-
-typedef struct acpi_fadt_conversion {
- u8 target;
- u8 source;
- u8 length;
-
-} acpi_fadt_conversion;
-
-static struct acpi_fadt_conversion fadt_conversion_table[] = {
- {ACPI_FADT_OFFSET(xpm1a_event_block),
- ACPI_FADT_OFFSET(pm1a_event_block),
- ACPI_FADT_OFFSET(pm1_event_length)},
- {ACPI_FADT_OFFSET(xpm1b_event_block),
- ACPI_FADT_OFFSET(pm1b_event_block),
- ACPI_FADT_OFFSET(pm1_event_length)},
- {ACPI_FADT_OFFSET(xpm1a_control_block),
- ACPI_FADT_OFFSET(pm1a_control_block),
- ACPI_FADT_OFFSET(pm1_control_length)},
- {ACPI_FADT_OFFSET(xpm1b_control_block),
- ACPI_FADT_OFFSET(pm1b_control_block),
- ACPI_FADT_OFFSET(pm1_control_length)},
- {ACPI_FADT_OFFSET(xpm2_control_block),
- ACPI_FADT_OFFSET(pm2_control_block),
- ACPI_FADT_OFFSET(pm2_control_length)},
- {ACPI_FADT_OFFSET(xpm_timer_block), ACPI_FADT_OFFSET(pm_timer_block),
- ACPI_FADT_OFFSET(pm_timer_length)},
- {ACPI_FADT_OFFSET(xgpe0_block), ACPI_FADT_OFFSET(gpe0_block),
- ACPI_FADT_OFFSET(gpe0_block_length)},
- {ACPI_FADT_OFFSET(xgpe1_block), ACPI_FADT_OFFSET(gpe1_block),
- ACPI_FADT_OFFSET(gpe1_block_length)}
-};
-
-#define ACPI_FADT_CONVERSION_ENTRIES (sizeof (fadt_conversion_table) /
sizeof (struct acpi_fadt_conversion))
-
/*******************************************************************************
*
* FUNCTION: acpi_tb_print_table_header
@@ -153,32 +106,6 @@ acpi_tb_print_table_header(acpi_physical_address address,
/*******************************************************************************
*
- * FUNCTION: acpi_tb_init_generic_address
- *
- * PARAMETERS: new_gas_struct - GAS struct to be initialized
- * bit_width - Width of this register
- * Address - Address of the register
- *
- * RETURN: None
- *
- * DESCRIPTION: Initialize a GAS structure.
- *
-
******************************************************************************/
-
-static void inline
-acpi_tb_init_generic_address(struct acpi_generic_address *new_gas_struct,
- u8 bit_width, u64 address)
-{
-
- ACPI_MOVE_64_TO_64(&new_gas_struct->address, &address);
- new_gas_struct->space_id = ACPI_ADR_SPACE_SYSTEM_IO;
- new_gas_struct->bit_width = bit_width;
- new_gas_struct->bit_offset = 0;
- new_gas_struct->access_width = 0;
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_tb_validate_checksum
*
* PARAMETERS: Table - ACPI table to verify
@@ -243,107 +170,6 @@ u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length)
/*******************************************************************************
*
- * FUNCTION: acpi_tb_convert_fadt
- *
- * PARAMETERS: None, uses acpi_gbl_FADT
- *
- * RETURN: None
- *
- * DESCRIPTION: Converts all versions of the FADT to a common internal format.
- *
- * NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt), and
must contain
- * a copy of the actual FADT.
- *
- * ACPICA will use the "X" fields of the FADT for all addresses.
- *
- * "X" fields are optional extensions to the original V1.0 fields. Even if
- * they are present in the structure, they can be optionally not used by
- * setting them to zero. Therefore, we must selectively expand V1.0 fields
- * if the corresponding X field is zero.
- *
- * For ACPI 1.0 FADTs, all address fields are expanded to the corresponding
- * "X" fields.
- *
- * For ACPI 2.0 FADTs, any "X" fields that are NULL are filled in by
- * expanding the corresponding ACPI 1.0 field.
- *
-
******************************************************************************/
-
-static void acpi_tb_convert_fadt(void)
-{
- u8 pm1_register_length;
- struct acpi_generic_address *target;
- acpi_native_uint i;
-
- /* Expand the FACS and DSDT addresses as necessary */
-
- if (!acpi_gbl_FADT.Xfacs) {
- acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
- }
-
- if (!acpi_gbl_FADT.Xdsdt) {
- acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
- }
-
- /*
- * Expand the 32-bit V1.0 addresses to the 64-bit "X" generic address
- * structures as necessary.
- */
- for (i = 0; i < ACPI_FADT_CONVERSION_ENTRIES; i++) {
- target =
- ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
- fadt_conversion_table[i].target);
-
- /* Expand only if the X target is null */
-
- if (!target->address) {
- acpi_tb_init_generic_address(target,
- *ACPI_ADD_PTR(u8,
-
&acpi_gbl_FADT,
-
fadt_conversion_table
- [i].length),
- (u64) * ACPI_ADD_PTR(u32,
-
&acpi_gbl_FADT,
-
fadt_conversion_table
- [i].
-
source));
- }
- }
-
- /*
- * Calculate separate GAS structs for the PM1 Enable registers.
- * These addresses do not appear (directly) in the FADT, so it is
- * useful to calculate them once, here.
- *
- * The PM event blocks are split into two register blocks, first is the
- * PM Status Register block, followed immediately by the PM Enable
Register
- * block. Each is of length (pm1_event_length/2)
- */
- pm1_register_length = (u8) ACPI_DIV_2(acpi_gbl_FADT.pm1_event_length);
-
- /* PM1A is required */
-
- acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
- pm1_register_length,
- (acpi_gbl_FADT.xpm1a_event_block.address +
- pm1_register_length));
-
- /* PM1B is optional; leave null if not present */
-
- if (acpi_gbl_FADT.xpm1b_event_block.address) {
- acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
- pm1_register_length,
- (acpi_gbl_FADT.xpm1b_event_block.
- address + pm1_register_length));
- }
-
- /* Global FADT is the new common V2.0 FADT */
-
- acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_tb_install_table
*
* PARAMETERS: Address - Physical address of DSDT or FACS
@@ -358,7 +184,7 @@ static void acpi_tb_convert_fadt(void)
*
******************************************************************************/
-static void
+void
acpi_tb_install_table(acpi_physical_address address,
u8 flags, char *signature, acpi_native_uint table_index)
{
@@ -412,68 +238,6 @@ acpi_tb_install_table(acpi_physical_address address,
/*******************************************************************************
*
- * FUNCTION: acpi_tb_parse_fadt
- *
- * PARAMETERS: table_index - Index for the FADT
- * Flags - Flags
- *
- * RETURN: None
- *
- * DESCRIPTION: Initialize the FADT, DSDT and FACS tables
- * (FADT contains the addresses of the DSDT and FACS)
- *
-
******************************************************************************/
-
-static void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags)
-{
- u32 length;
- struct acpi_table_header *table;
-
- /*
- * Special case for the FADT because of multiple versions and the fact
- * that it contains pointers to both the DSDT and FACS tables.
- *
- * Get a local copy of the FADT and convert it to a common format
- * Map entire FADT, assumed to be smaller than one page.
- */
- length = acpi_gbl_root_table_list.tables[table_index].length;
-
- table =
- acpi_os_map_memory(acpi_gbl_root_table_list.tables[table_index].
- address, length);
- if (!table) {
- return;
- }
-
- /*
- * Validate the FADT checksum before we copy the table. Ignore
- * checksum error as we want to try to get the DSDT and FACS.
- */
- (void)acpi_tb_verify_checksum(table, length);
-
- /* Copy the entire FADT locally */
-
- ACPI_MEMSET(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt));
-
- ACPI_MEMCPY(&acpi_gbl_FADT, table,
- ACPI_MIN(length, sizeof(struct acpi_table_fadt)));
- acpi_os_unmap_memory(table, length);
-
- /* Convert local FADT to the common internal format */
-
- acpi_tb_convert_fadt();
-
- /* Extract the DSDT and FACS tables from the FADT */
-
- acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt,
- flags, ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT);
-
- acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs,
- flags, ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS);
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_tb_get_root_table_entry
*
* PARAMETERS: table_entry - Pointer to the RSDT/XSDT table entry
diff --git a/drivers/acpi/utilities/utinit.c b/drivers/acpi/utilities/utinit.c
index 5079f19..303bde7 100644
--- a/drivers/acpi/utilities/utinit.c
+++ b/drivers/acpi/utilities/utinit.c
@@ -50,103 +50,8 @@
ACPI_MODULE_NAME("utinit")
/* Local prototypes */
-static void acpi_ut_fadt_register_error(char *register_name, u32 value);
-
static void acpi_ut_terminate(void);
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_fadt_register_error
- *
- * PARAMETERS: register_name - Pointer to string identifying
register
- * Value - Actual register contents value
- *
- * RETURN: None
- *
- * DESCRIPTION: Display failure message
- *
-
******************************************************************************/
-
-static void acpi_ut_fadt_register_error(char *register_name, u32 value)
-{
-
- ACPI_WARNING((AE_INFO, "Invalid FADT value %s = %X",
- register_name, value));
-}
-
-/******************************************************************************
- *
- * FUNCTION: acpi_ut_validate_fadt
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Validate various ACPI registers in the FADT
- *
-
******************************************************************************/
-
-acpi_status acpi_ut_validate_fadt(void)
-{
-
- /*
- * Verify Fixed ACPI Description Table fields,
- * but don't abort on any problems, just display error
- */
- if (acpi_gbl_FADT.pm1_event_length < 4) {
- acpi_ut_fadt_register_error("Pm1EventLength",
- (u32) acpi_gbl_FADT.
- pm1_event_length);
- }
-
- if (acpi_gbl_FADT.pm_timer_length < 4) {
- acpi_ut_fadt_register_error("PmTimerLength",
- (u32) acpi_gbl_FADT.
- pm_timer_length);
- }
-
- if (!acpi_gbl_FADT.pm1_control_length) {
- acpi_ut_fadt_register_error("Pm1ControlLength", 0);
- }
-
- if (!acpi_gbl_FADT.xpm1a_event_block.address) {
- acpi_ut_fadt_register_error("XPm1aEventBlock.Address", 0);
- }
-
- if (!acpi_gbl_FADT.xpm1a_control_block.address) {
- acpi_ut_fadt_register_error("XPm1aControlBlock.Address", 0);
- }
-
- if (!acpi_gbl_FADT.xpm_timer_block.address) {
- acpi_ut_fadt_register_error("XPmTimerBlock.Address", 0);
- }
-
- if ((acpi_gbl_FADT.xpm2_control_block.address &&
- !acpi_gbl_FADT.pm2_control_length)) {
- acpi_ut_fadt_register_error("Pm2ControlLength",
- (u32) acpi_gbl_FADT.
- pm2_control_length);
- }
-
- /* Length of GPE blocks must be a multiple of 2 */
-
- if (acpi_gbl_FADT.xgpe0_block.address &&
- (acpi_gbl_FADT.gpe0_block_length & 1)) {
- acpi_ut_fadt_register_error("Gpe0BlockLength",
- (u32) acpi_gbl_FADT.
- gpe0_block_length);
- }
-
- if (acpi_gbl_FADT.xgpe1_block.address &&
- (acpi_gbl_FADT.gpe1_block_length & 1)) {
- acpi_ut_fadt_register_error("Gpe1BlockLength",
- (u32) acpi_gbl_FADT.
- gpe1_block_length);
- }
-
- return (AE_OK);
-}
-
/******************************************************************************
*
* FUNCTION: acpi_ut_terminate
diff --git a/drivers/acpi/utilities/utxface.c b/drivers/acpi/utilities/utxface.c
index 7ea2981..bec0f54 100644
--- a/drivers/acpi/utilities/utxface.c
+++ b/drivers/acpi/utilities/utxface.c
@@ -127,20 +127,6 @@ acpi_status acpi_enable_subsystem(u32 flags)
ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
- /*
- * We must initialize the hardware before we can enable ACPI.
- * The values from the FADT are validated here.
- */
- if (!(flags & ACPI_NO_HARDWARE_INIT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "[Init] Initializing ACPI hardware\n"));
-
- status = acpi_hw_initialize();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
/* Enable ACPI mode */
if (!(flags & ACPI_NO_ACPI_ENABLE)) {
diff --git a/include/acpi/achware.h b/include/acpi/achware.h
index 29b60a8..f3e9a03 100644
--- a/include/acpi/achware.h
+++ b/include/acpi/achware.h
@@ -61,8 +61,6 @@
/*
* hwacpi - high level functions
*/
-acpi_status acpi_hw_initialize(void);
-
acpi_status acpi_hw_set_mode(u32 mode);
u32 acpi_hw_get_mode(void);
diff --git a/include/acpi/actables.h b/include/acpi/actables.h
index 9183de1..6294734 100644
--- a/include/acpi/actables.h
+++ b/include/acpi/actables.h
@@ -45,6 +45,11 @@
#define __ACTABLES_H__
/*
+ * tbfadt - FADT parse/convert/validate
+ */
+void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags);
+
+/*
* tbfind - find ACPI table
*/
acpi_status
@@ -97,6 +102,10 @@ u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length);
acpi_status
acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length);
+void
+acpi_tb_install_table(acpi_physical_address address,
+ u8 flags, char *signature, acpi_native_uint table_index);
+
acpi_status
acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags);
diff --git a/include/acpi/acutils.h b/include/acpi/acutils.h
index 3c66f54..ba7d7e9 100644
--- a/include/acpi/acutils.h
+++ b/include/acpi/acutils.h
@@ -141,8 +141,6 @@ acpi_status acpi_ut_hardware_initialize(void);
void acpi_ut_subsystem_shutdown(void);
-acpi_status acpi_ut_validate_fadt(void);
-
/*
* utclib - Local implementations of C library functions
*/
--
1.5.0.rc3.39.gec804
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
