1 and 2 applied.
thanks,
-Len
On Tuesday 20 November 2007 19:23, Alexey Starikovskiy wrote:
> Sometimes it is usefull to see raw protocol dump.
> Uncomment '#define DEBUG' at the beginning of file to make EC
> really verbose.
>
> Signed-off-by: Márton Németh <[EMAIL PROTECTED]>
> Signed-off-by: Alexey Starikovskiy <[EMAIL PROTECTED]>
> ---
>
> drivers/acpi/ec.c | 50 +++++++++++++++++++++++++++++++-------------------
> 1 files changed, 31 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
> index 06b78e5..d5a5958 100644
> --- a/drivers/acpi/ec.c
> +++ b/drivers/acpi/ec.c
> @@ -47,6 +47,9 @@
> #undef PREFIX
> #define PREFIX "ACPI: EC: "
>
> +/* Uncomment next line to get verbose print outs*/
> +/* #define DEBUG */
> +
> /* EC status register */
> #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
> #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
> @@ -131,21 +134,27 @@ static struct acpi_ec {
>
> static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
> {
> - return inb(ec->command_addr);
> + u8 x = inb(ec->command_addr);
> + pr_debug(PREFIX "---> status = 0x%2x\n", x);
> + return x;
> }
>
> static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
> {
> + u8 x = inb(ec->data_addr);
> + pr_debug(PREFIX "---> data = 0x%2x\n", x);
> return inb(ec->data_addr);
> }
>
> static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
> {
> + pr_debug(PREFIX "<--- command = 0x%2x\n", command);
> outb(command, ec->command_addr);
> }
>
> static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
> {
> + pr_debug(PREFIX "<--- data = 0x%2x\n", data);
> outb(data, ec->data_addr);
> }
>
> @@ -175,13 +184,14 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum
> ec_event event, int force_poll)
> if (acpi_ec_check_status(ec, event)) {
> if (event == ACPI_EC_EVENT_OBF_1) {
> /* miss OBF = 1 GPE, don't expect it anymore */
> - printk(KERN_INFO PREFIX "missing OBF_1
> confirmation,"
> + pr_info(PREFIX "missing OBF_1 confirmation,"
> "switching to degraded mode.\n");
> set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags);
> } else {
> /* missing GPEs, switch back to poll mode */
> - printk(KERN_INFO PREFIX "missing IBF_1
> confirmations,"
> - "switch off interrupt mode.\n");
> + if (printk_ratelimit())
> + pr_info(PREFIX "missing IBF_1
> confirmations,"
> + "switch off interrupt mode.\n");
> clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
> }
> return 0;
> @@ -194,7 +204,7 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event
> event, int force_poll)
> return 0;
> }
> }
> - printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
> + pr_err(PREFIX "acpi_ec_wait timeout,"
> " status = %d, expect_event = %d\n",
> acpi_ec_read_status(ec), event);
> return -ETIME;
> @@ -208,11 +218,11 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec
> *ec, u8 command,
> int result = 0;
> set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
> acpi_ec_write_cmd(ec, command);
> -
> + pr_debug(PREFIX "transaction start\n");
> for (; wdata_len > 0; --wdata_len) {
> result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
> if (result) {
> - printk(KERN_ERR PREFIX
> + pr_err(PREFIX
> "write_cmd timeout, command = %d\n", command);
> goto end;
> }
> @@ -223,7 +233,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec
> *ec, u8 command,
> if (!rdata_len) {
> result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
> if (result) {
> - printk(KERN_ERR PREFIX
> + pr_err(PREFIX
> "finish-write timeout, command = %d\n", command);
> goto end;
> }
> @@ -235,8 +245,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec
> *ec, u8 command,
> force_poll = 1;
> result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
> if (result) {
> - printk(KERN_ERR PREFIX "read timeout, command = %d\n",
> - command);
> + pr_err(PREFIX "read timeout, command = %d\n", command);
> goto end;
> }
> /* Don't expect GPE after last read */
> @@ -245,6 +254,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec
> *ec, u8 command,
> *(rdata++) = acpi_ec_read_data(ec);
> }
> end:
> + pr_debug(PREFIX "transaction end\n");
> return result;
> }
>
> @@ -273,8 +283,8 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8
> command,
>
> status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
> if (status) {
> - printk(KERN_ERR PREFIX
> - "input buffer is not empty, aborting transaction\n");
> + pr_err(PREFIX "input buffer is not empty, "
> + "aborting transaction\n");
> goto end;
> }
>
> @@ -488,6 +498,7 @@ static u32 acpi_ec_gpe_handler(void *data)
> acpi_status status = AE_OK;
> struct acpi_ec *ec = data;
>
> + pr_debug(PREFIX "~~~> interrupt\n");
> clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
> if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
> wake_up(&ec->wait);
> @@ -498,8 +509,9 @@ static u32 acpi_ec_gpe_handler(void *data)
> acpi_ec_gpe_query, ec);
> } else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) {
> /* this is non-query, must be confirmation */
> - printk(KERN_INFO PREFIX "non-query interrupt received,"
> - " switching to interrupt mode\n");
> + if (printk_ratelimit())
> + pr_info(PREFIX "non-query interrupt received,"
> + " switching to interrupt mode\n");
> set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
> }
>
> @@ -701,10 +713,10 @@ static void ec_remove_handlers(struct acpi_ec *ec)
> {
> if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
> ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
> - printk(KERN_ERR PREFIX "failed to remove space handler\n");
> + pr_err(PREFIX "failed to remove space handler\n");
> if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
> &acpi_ec_gpe_handler)))
> - printk(KERN_ERR PREFIX "failed to remove gpe handler\n");
> + pr_err(PREFIX "failed to remove gpe handler\n");
> ec->handlers_installed = 0;
> }
>
> @@ -747,9 +759,9 @@ static int acpi_ec_add(struct acpi_device *device)
> first_ec = ec;
> acpi_driver_data(device) = ec;
> acpi_ec_add_fs(device);
> - printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data
> = 0x%lx\n",
> + pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data =
> 0x%lx\n",
> ec->gpe, ec->command_addr, ec->data_addr);
> - printk(KERN_INFO PREFIX "driver started in %s mode\n",
> + pr_info(PREFIX "driver started in %s mode\n",
> (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll");
> return 0;
> }
> @@ -875,7 +887,7 @@ int __init acpi_ec_ecdt_probe(void)
> status = acpi_get_table(ACPI_SIG_ECDT, 1,
> (struct acpi_table_header **)&ecdt_ptr);
> if (ACPI_SUCCESS(status)) {
> - printk(KERN_INFO PREFIX "EC description table is found,
> configuring boot EC\n");
> + pr_info(PREFIX "EC description table is found, configuring boot
> EC\n");
> boot_ec->command_addr = ecdt_ptr->control.address;
> boot_ec->data_addr = ecdt_ptr->data.address;
> boot_ec->gpe = ecdt_ptr->gpe;
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
