On Tue, Dec 11, 2007 at 01:00:24PM -0700, Bjorn Helgaas wrote: > On Tuesday 11 December 2007 10:44:43 am Borislav Petkov wrote: > > On Sun, Dec 09, 2007 at 10:19:47AM +0100, Borislav Petkov wrote: > > > On Sun, Dec 09, 2007 at 08:50:02AM +0100, Borislav Petkov wrote: > > > > Hi Andrew, > > > > Hi Len, > > > > > > > > after booting 2.6.24-rc4-mm1 (2.6.24-rc4-190-g94545ba, otoh, boots just > > > > fine) on my asus laptop, the machine reboots after claiming that > > > > "Critical temperature reached (255 C)." However, the degrees number > > > > is kinda hinting at 0xff all-ones field. Will try dump_stack in > > > > acpi_thermal_critical() to checkout the call path. For now here's the > > > > netconsole bootlog: > > > > > > Here's what i got so far: > > > > > > [ 50.287939] Pid: 1, comm: swapper Not tainted 2.6.24-rc4-mm1 #14 > > > [ 50.287999] [<c0104b65>] show_trace_log_lvl+0x12/0x25 > > > [ 50.288103] [<c01053e7>] show_trace+0xd/0x10 > > > [ 50.288202] [<c0105a6c>] dump_stack+0x57/0x5f > > > [ 50.288303] [<c021c991>] acpi_thermal_check+0x150/0x3bb > > > [ 50.288415] [<c021d4b3>] acpi_thermal_add+0x261/0x2cf > > > [ 50.288515] [<c0213549>] acpi_device_probe+0x3e/0xdb > > > [ 50.288615] [<c023f8f5>] driver_probe_device+0xaf/0x12a > > > [ 50.288717] [<c023fa88>] __driver_attach+0x6c/0xa5 > > > [ 50.288817] [<c023ee5a>] bus_for_each_dev+0x3e/0x60 > > > [ 50.288916] [<c023f77d>] driver_attach+0x14/0x16 > > > [ 50.289015] [<c023f5a6>] bus_add_driver+0xa6/0x1a8 > > > [ 50.289114] [<c023fc53>] driver_register+0x42/0x47 > > > [ 50.289214] [<c02138c2>] acpi_bus_register_driver+0x3a/0x3c > > > [ 50.289316] [<c044306b>] acpi_thermal_init+0x57/0x76 > > > [ 50.289424] [<c04344a7>] kernel_init+0x138/0x280 > > > [ 50.289525] [<c01047df>] kernel_thread_helper+0x7/0x10 > > > [ 50.289625] ======================= > > > [ 50.289680] ACPI: Critical trip point > > > [ 50.289736] Critical temperature reached (255 C), shutting down. > > > > > > so in acpi_thermal_get_temperature() called in acpi_thermal_add() the > > > tz->temperature thingy is not set properly (printk's added): > > > > > > [ 50.276607] Old temp: 4294967023 > > > [ 50.281890] Got temp: 255 > > > [ 50.282567] Old temp: 255 > > > [ 50.287882] Got temp: 255 > > > > > > What's also strange is that the tz acpi_thermal is alloc'd with kzalloc > > > and > > > there's still garbage in it after reading it in > > > acpi_thermal_get_temperature() > > > for the first time. Debugging continues... > > > > (i almost suspected that the problem might be something completely > > different.) > > well, after bisecting the rc4-mm1 tree for a whole day today, the evildoer > > turned out to be > > > > broken-out/pnp-request-ioport-and-iomem-resources-used-by-active-devices.patch. > > > > After backing this one out, mm1 boots just fine here. > > Thanks for tracking this down. I'll look into your logs and see if I > can figure out what's going on. There's another report related to that > patch here: http://lkml.org/lkml/2007/11/22/110 . Looks like a different > symptom though, so probably a different fix.
>From what i can roughly tell so far it seems like an resource conflict between >acpi and the pnp requested regions in your patch which result in the acpi_thermal code to read the wrong (0xff) temperature value and halt the machine, but i might be wrong on the details since acpi is such a big code chunk to swallow. Anyways, this is a different issue than the one you quote above. -- Regards/Gruß, Boris. - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html