My HP nx6325 started printing the ACPI Error's below starting at the commit below.
thanks, -Len 266b9f8727976769e2ed2dad77ac9295f37e321e is first bad commit commit 266b9f8727976769e2ed2dad77ac9295f37e321e Author: Thomas Gleixner <[EMAIL PROTECTED]> Date: Wed Jan 30 13:34:06 2008 +0100 x86: fix ioremap RAM check Signed-off-by: Ingo Molnar <[EMAIL PROTECTED]> Signed-off-by: Thomas Gleixner <[EMAIL PROTECTED]> :040000 040000 8e3dfc0d4ae3145f14b684c4da844d3d0550cc3d 2b8673a61062b3548e6341c0155c35acd33a2b00 M arch ... Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:.... ACPI Error (exregion-0164): Could not map memory at 000000000000010A, size F6 [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241._INI] (Node ffff81001b91c180), AE_NO_MEMORY ACPI Exception (nsinit-0564): AE_NO_MEMORY, during \_SB_.C074.C241._INI._INI execution [20070126] .. Executed 6 _INI methods requiring 2 _STA executions (examined 120 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Error (exregion-0164): Could not map memory at 0000000000000104, size FC [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (exregion-0164): Could not map memory at 0000000000000184, size 7C [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [C074] (0000:00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT] ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12C] (IRQs *10 11) ACPI: Power Resource [C223] (off) ACPI: Power Resource [C1FE] (off) ACPI: Power Resource [C217] (on) ACPI: Power Resource [C34B] (off) ACPI: Power Resource [C34C] (off) ACPI: Power Resource [C34D] (off) ACPI: Power Resource [C34E] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered ACPI Error (exregion-0164): Could not map memory at 0000000000000104, size FC [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (uteval-0233): Method execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (exregion-0164): Could not map memory at 0000000000000184, size 7C [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY ACPI Error (uteval-0233): Method execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY
Linux version 2.6.24-04835-g266b9f8 ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (SUSE Linux)) #62 SMP Mon Feb 4 02:15:23 EST 2008 Command line: root=/dev/sda3 debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bfd0000 (usable) BIOS-e820: 000000001bfd0000 - 000000001bfe5600 (reserved) BIOS-e820: 000000001bfe5600 - 000000001bff8000 (ACPI NVS) BIOS-e820: 000000001bff8000 - 0000000020000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 114640) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.4 present. ACPI: RSDP 000F7D30, 0024 (r2 HP ) ACPI: XSDT 1BFE57B4, 0054 (r1 HP 0944 6070620 HP 1) ACPI: FACP 1BFE5684, 00F4 (r4 HP 0944 3 HP 1) ACPI: DSDT 1BFE58DC, EE7A (r1 HP SB400 10000 MSFT 100000E) ACPI: FACS 1BFF7E80, 0040 ACPI: APIC 1BFE5808, 0062 (r1 HP 0944 1 HP 1) ACPI: MCFG 1BFE586C, 003C (r1 HP 0944 1 HP 1) ACPI: TCPA 1BFE58A8, 0032 (r2 HP 0944 1 HP 1) ACPI: SSDT 1BFF4756, 0059 (r1 HP HPQNLP 1 MSFT 100000E) ACPI: SSDT 1BFF47AF, 0182 (r1 HP PSSTBLID 1 HP 1) ACPI: DMI detected: Hewlett-Packard Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000001bfd0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 114640) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000001bfd0000 No mptable found. [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 114640 On node 0 totalpages: 114543 DMA zone: 56 pages used for memmap DMA zone: 1741 pages reserved DMA zone: 2202 pages, LIFO batch:0 DMA32 zone: 1511 pages used for memmap DMA32 zone: 109033 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ATI board detected. Disabling timer routing over 8254. Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 37984 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 111235 Policy zone: DMA32 Kernel command line: root=/dev/sda3 debug Initializing CPU#0 PID hash table entries: 2048 (order: 11, 16384 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 1595.997 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Node 0: aperture @ 14b4000000 size 32 MB Aperture beyond 4GB. Ignoring. No AGP bridge found Memory: 442568k/458560k available (3584k kernel code, 15604k reserved, 1999k data, 360k init) Calibrating delay using timer specific routine.. 3194.16 BogoMIPS (lpj=1597082) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20070126 Parsing all Control Methods: Table [DSDT](id 0001) - 1153 Objects with 113 Devices 337 Methods 33 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 2 Objects with 0 Devices 2 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 8 Objects with 0 Devices 0 Methods 0 Regions tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ..MP-BIOS bug: 8254 timer not connected to IO-APIC Disabling APIC timer Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 3191.58 BogoMIPS (lpj=1595792) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02 Brought up 2 CPUs CPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002 domain 1: span 00000003 groups: 00000003 CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001 domain 1: span 00000003 groups: 00000003 net_namespace: 304 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - efffffff PCI: No mmconfig possible on device 00:18 evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x15 evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 3 Wake, Enabled 11 Runtime GPEs in this block ACPI: EC: Look up EC in DSDT ACPI: EC: non-query interrupt received, switching to interrupt mode Completing Region/Field/Buffer/Package initialization:................................................................................................................................................................ Initialized 29/33 Regions 0/0 Fields 63/64 Buffers 68/78 Packages (1172 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:....ACPI Error (exregion-0164): Could not map memory at 000000000000010A, size F6 [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241._INI] (Node ffff81001b91c180), AE_NO_MEMORY ACPI Exception (nsinit-0564): AE_NO_MEMORY, during \_SB_.C074.C241._INI._INI execution [20070126] .. Executed 6 _INI methods requiring 2 _STA executions (examined 120 objects) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI Error (exregion-0164): Could not map memory at 0000000000000104, size FC [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (exregion-0164): Could not map memory at 0000000000000184, size 7C [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [C074] (0000:00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT] ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C12C] (IRQs *10 11) ACPI: Power Resource [C223] (off) ACPI: Power Resource [C1FE] (off) ACPI: Power Resource [C217] (on) ACPI: Power Resource [C34B] (off) ACPI: Power Resource [C34C] (off) ACPI: Power Resource [C34D] (off) ACPI: Power Resource [C34E] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered ACPI Error (exregion-0164): Could not map memory at 0000000000000104, size FC [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (uteval-0233): Method execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (exregion-0164): Could not map memory at 0000000000000184, size 7C [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY ACPI Error (uteval-0233): Method execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 0 of device 0000:00:14.2 DMAR:No DMAR devices found system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xe0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x1bffffff could not be reserved system 00:0a: ioport range 0x40b-0x40b has been reserved system 00:0a: ioport range 0x4d0-0x4d1 has been reserved system 00:0a: ioport range 0x4d6-0x4d6 has been reserved system 00:0a: ioport range 0x500-0x51f has been reserved system 00:0a: ioport range 0xc00-0xc01 has been reserved system 00:0a: ioport range 0xc14-0xc14 has been reserved system 00:0a: ioport range 0xc50-0xc51 has been reserved system 00:0a: ioport range 0xc52-0xc52 has been reserved system 00:0a: ioport range 0xc6c-0xc6c has been reserved system 00:0a: ioport range 0xc6f-0xc6f has been reserved system 00:0a: ioport range 0xcd4-0xcdf has been reserved system 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved system 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved system 00:0b: ioport range 0x8000-0x802f has been reserved system 00:0b: ioport range 0x8100-0x811f has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff could not be reserved system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:0c: iomem range 0xcf000-0xcffff has been reserved system 00:0c: iomem range 0x1c000000-0x1fffffff could not be reserved system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved ACPI: PCI Interrupt 0000:30:00.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:30:00.0 to 64 Time: acpi_pm clocksource has been installed. Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 lapic is not functional. Could not switch to high resolution mode on CPU 0 ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 PCI: Bridge: 0000:00:01.0 IO window: 6000-6fff MEM window: d0300000-d03fffff PREFETCH window: c0000000-c3ffffff PCI: Bridge: 0000:00:04.0 IO window: 4000-5fff MEM window: cc000000-cfffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: 2000-3fff MEM window: c8000000-cbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: c4000000-c40fffff PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:04.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 34000000-37ffffff MEM window: 38000000-3bffffff PCI: Bridge: 0000:00:14.4 IO window: disabled. MEM window: d0000000-d02fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 3, 32768 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 6, 262144 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) PCI: MSI quirk detected. MSI deactivated. Boot video device is 0000:01:05.0 PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] Allocate Port Service[0000:00:04.0:pcie03] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] Allocate Port Service[0000:00:05.0:pcie03] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] Allocate Port Service[0000:00:06.0:pcie03] AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [C25A] input: Lid Switch as /class/input/input2 ACPI: Lid Switch [C25B] ACPI: Processor [C000] (supports 8 throttling states) ACPI: Processor [C001] (supports 8 throttling states) ACPI Error (exregion-0164): Could not map memory at 0000000000000104, size FC [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (uteval-0233): Method execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (exregion-0164): Could not map memory at 0000000000000184, size 7C [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY ACPI Error (uteval-0233): Method execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY Real Time Clock Driver v1.12ac Linux agpgart interface v0.102 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled Floppy drive(s): fd0 is 1.44M Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional. Could not switch to high resolution mode on CPU 1 lapic is not functional. Could not switch to high resolution mode on CPU 0 floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation tg3.c:v3.87 (December 20, 2007) ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 23 eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:30:e4:ee eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]> console [netcon0] enabled netconsole: network logging started Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ATIIXP: IDE controller (0x1002:0x4376 rev 0x80) at PCI slot 0000:00:14.1 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ATIIXP: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio ATIIXP: simplex device: DMA disabled ide1: ATIIXP Bus-Master DMA disabled (BIOS) Probing IDE interface ide0... hda: TSSTcorpCDW/DVD TS-L462C, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: MWDMA2 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache Uniform CD-ROM driver Revision: 3.20 megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.16-rc1 Thu. Nov. 07 10:09:32 PDT 2007 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods sata_sil 0000:00:12.0: version 2.3 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16 scsi0 : sata_sil scsi1 : sata_sil ACPI Error (exregion-0164): Could not map memory at 0000000000000104, size FC [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (uteval-0233): Method execution failed [\_SB_.C074.C241.C24F.C250._STA] (Node ffff81001b91c768), AE_NO_MEMORY ACPI Error (exregion-0164): Could not map memory at 0000000000000184, size 7C [20070126] ACPI Exception (evregion-0420): AE_NO_MEMORY, Returned by Handler for [SystemMemory] [20070126] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY ACPI Error (uteval-0233): Method execution failed [\_SB_.C074.C241.C251.C252._STA] (Node ffff81001b91c650), AE_NO_MEMORY ata1: SATA max UDMA/100 mmio [EMAIL PROTECTED] tf 0xd0409080 irq 16 ata2: SATA max UDMA/100 mmio [EMAIL PROTECTED] tf 0xd04090c0 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: FUJITSU MHT2040BH, 0000104A, max UDMA/100 ata1.00: 78140160 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2040B 0000 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 Fusion MPT base driver 3.04.06 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SPI Host driver 3.04.06 Fusion MPT SAS Host driver 3.04.06 ACPI: PCI Interrupt 0000:02:04.1[A] -> GSI 20 (level, low) -> IRQ 20 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d0011000-d00117ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: raw1394: /dev/raw1394 device initialized ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xd0403000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 19, io mem 0xd0401000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 19, io mem 0xd0402000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected USB Universal Host Controller Interface driver v3.0 usb 3-1: new full speed USB device using ohci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:C214,PNP0f13:C215] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input4 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 360k freed ACPI: Thermal Zone [TZ1] (53 C) power_supply C1BD: uevent power_supply C1BD: No power supply yet power_supply C1BD: power_supply_changed ACPI: AC Adapter [C1BD] (on-line) power_supply C1BD: power_supply_changed_work power_supply C1BD: power_supply_update_gen_leds 1 power_supply C1BD: uevent power_supply C1BD: POWER_SUPPLY_NAME=C1BD power_supply C1BD: Static prop TYPE=Mains power_supply C1BD: 1 dynamic props power_supply C1BD: prop ONLINE=1 ACPI: Thermal Zone [TZ2] (46 C) ACPI: Thermal Zone [TZ3] (23 C) power_supply C1BF: uevent power_supply C1BF: No power supply yet power_supply C1BF: power_supply_changed power_supply C1BF: power_supply_changed_work power_supply C1BF: power_supply_update_bat_leds 4 power_supply C1BF: uevent power_supply C1BF: POWER_SUPPLY_NAME=C1BF power_supply C1BF: Static prop TYPE=Battery power_supply C1BF: 11 dynamic props power_supply C1BF: prop STATUS=Full power_supply C1BF: prop PRESENT=1 power_supply C1BF: prop TECHNOLOGY=Li-ion power_supply C1BF: prop VOLTAGE_MIN_DESIGN=10800000 power_supply C1BF: prop VOLTAGE_NOW=12494000 power_supply C1BF: prop CURRENT_NOW=0 power_supply C1BF: prop CHARGE_FULL_DESIGN=4679000 power_supply C1BF: prop CHARGE_FULL=4679000 power_supply C1BF: prop CHARGE_NOW=4608000 power_supply C1BF: prop MODEL_NAME=Primary power_supply C1BF: prop MANUFACTURER=Hewlett-Packard ACPI: Battery Slot [C1BF] (battery present) ACPI: Battery Slot [C1BE] (battery absent) input: Video Bus as /class/input/input5 ACPI: Video Device [C076] (multi-head: yes rom: no post: no) ACPI: Transitioning device [C34F] to D3 ACPI: Transitioning device [C34F] to D3 ACPI: Fan [C34F] (off) ACPI: Transitioning device [C350] to D3 ACPI: Transitioning device [C350] to D3 ACPI: Fan [C350] (off) ACPI: Transitioning device [C351] to D3 ACPI: Transitioning device [C351] to D3 ACPI: Fan [C351] (off) ACPI: Fan [C352] (on) Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0] Yenta: Enabling burst memory read transactions Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64 Yenta: ISA IRQ mask 0x0ef8, PCI irq 20 Socket status: 30000006 Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06 pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd02fffff EXT3 FS on sda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k warning: process `kudzu' used the deprecated sysctl system call with 1.23. tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX.