applied

thanks,
-len

On Monday 11 February 2008 20:50, Venki Pallipadi wrote:
> From: Venkatesh Pallipadi <[EMAIL PROTECTED]>
> 
> Add a new sysfs entry under cpuidle states. desc - can be used by driver to
> communicate to userspace any specific information about the state.
> This helps in identifying the exact hardware C-states behind the ACPI C-state
> definition.
> 
> Idea is to export this through powertop, which will help to map the C-state
> reported by powertop to actual hardware C-state.
> 
> Signed-off-by: Venkatesh Pallipadi <[EMAIL PROTECTED]>
> 
> Index: linux-2.6.25-rc/arch/x86/kernel/acpi/cstate.c
> ===================================================================
> --- linux-2.6.25-rc.orig/arch/x86/kernel/acpi/cstate.c
> +++ linux-2.6.25-rc/arch/x86/kernel/acpi/cstate.c
> @@ -126,6 +126,8 @@ int acpi_processor_ffh_cstate_probe(unsi
>               printk(KERN_DEBUG "Monitor-Mwait will be used to enter C-%d "
>                      "state\n", cx->type);
>       }
> +     snprintf(cx->desc, ACPI_CX_DESC_LEN, "ACPI FFH INTEL MWAIT 0x%x",
> +              cx->address);
>  
>  out:
>       set_cpus_allowed(current, saved_mask);
> Index: linux-2.6.25-rc/drivers/acpi/processor_idle.c
> ===================================================================
> --- linux-2.6.25-rc.orig/drivers/acpi/processor_idle.c
> +++ linux-2.6.25-rc/drivers/acpi/processor_idle.c
> @@ -917,11 +917,16 @@ static int acpi_processor_get_power_info
>                                * Otherwise, ignore this info and continue.
>                                */
>                               cx.entry_method = ACPI_CSTATE_HALT;
> +                             snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI HLT");
>                       } else {
>                               continue;
>                       }
> +             } else {
> +                     snprintf(cx.desc, ACPI_CX_DESC_LEN, "ACPI IOPORT 0x%x",
> +                              cx.address);
>               }
>  
> +
>               obj = &(element->package.elements[2]);
>               if (obj->type != ACPI_TYPE_INTEGER)
>                       continue;
> @@ -1620,6 +1625,11 @@ static int acpi_processor_setup_cpuidle(
>               return -EINVAL;
>       }
>  
> +     for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
> +             dev->states[i].name[0] = '\0';
> +             dev->states[i].desc[0] = '\0';
> +     }
> +
>       for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
>               cx = &pr->power.states[i];
>               state = &dev->states[count];
> @@ -1636,6 +1646,7 @@ static int acpi_processor_setup_cpuidle(
>               cpuidle_set_statedata(state, cx);
>  
>               snprintf(state->name, CPUIDLE_NAME_LEN, "C%d", i);
> +             strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN);
>               state->exit_latency = cx->latency;
>               state->target_residency = cx->latency * 6;
>               state->power_usage = cx->power;
> Index: linux-2.6.25-rc/drivers/cpuidle/sysfs.c
> ===================================================================
> --- linux-2.6.25-rc.orig/drivers/cpuidle/sysfs.c
> +++ linux-2.6.25-rc/drivers/cpuidle/sysfs.c
> @@ -218,16 +218,23 @@ static ssize_t show_state_##_name(struct
>       return sprintf(buf, "%u\n", state->_name);\
>  }
>  
> -static ssize_t show_state_name(struct cpuidle_state *state, char *buf)
> -{
> -     return sprintf(buf, "%s\n", state->name);
> +#define define_show_state_str_function(_name) \
> +static ssize_t show_state_##_name(struct cpuidle_state *state, char *buf) \
> +{ \
> +     if (state->_name[0] == '\0')\
> +             return sprintf(buf, "<null>\n");\
> +     return sprintf(buf, "%s\n", state->_name);\
>  }
>  
>  define_show_state_function(exit_latency)
>  define_show_state_function(power_usage)
>  define_show_state_function(usage)
>  define_show_state_function(time)
> +define_show_state_str_function(name)
> +define_show_state_str_function(desc)
> +
>  define_one_state_ro(name, show_state_name);
> +define_one_state_ro(desc, show_state_desc);
>  define_one_state_ro(latency, show_state_exit_latency);
>  define_one_state_ro(power, show_state_power_usage);
>  define_one_state_ro(usage, show_state_usage);
> @@ -235,6 +242,7 @@ define_one_state_ro(time, show_state_tim
>  
>  static struct attribute *cpuidle_state_default_attrs[] = {
>       &attr_name.attr,
> +     &attr_desc.attr,
>       &attr_latency.attr,
>       &attr_power.attr,
>       &attr_usage.attr,
> Index: linux-2.6.25-rc/include/acpi/processor.h
> ===================================================================
> --- linux-2.6.25-rc.orig/include/acpi/processor.h
> +++ linux-2.6.25-rc/include/acpi/processor.h
> @@ -32,9 +32,11 @@
>  #define DOMAIN_COORD_TYPE_SW_ANY     0xfd
>  #define DOMAIN_COORD_TYPE_HW_ALL     0xfe
>  
> -#define ACPI_CSTATE_SYSTEMIO (0)
> -#define ACPI_CSTATE_FFH              (1)
> -#define ACPI_CSTATE_HALT     (2)
> +#define ACPI_CSTATE_SYSTEMIO 0
> +#define ACPI_CSTATE_FFH              1
> +#define ACPI_CSTATE_HALT     2
> +
> +#define ACPI_CX_DESC_LEN     32
>  
>  /* Power Management */
>  
> @@ -74,6 +76,7 @@ struct acpi_processor_cx {
>       u64 time;
>       struct acpi_processor_cx_policy promotion;
>       struct acpi_processor_cx_policy demotion;
> +     char desc[ACPI_CX_DESC_LEN];
>  };
>  
>  struct acpi_processor_power {
> Index: linux-2.6.25-rc/include/linux/cpuidle.h
> ===================================================================
> --- linux-2.6.25-rc.orig/include/linux/cpuidle.h
> +++ linux-2.6.25-rc/include/linux/cpuidle.h
> @@ -19,6 +19,7 @@
>  
>  #define CPUIDLE_STATE_MAX    8
>  #define CPUIDLE_NAME_LEN     16
> +#define CPUIDLE_DESC_LEN     32
>  
>  struct cpuidle_device;
>  
> @@ -29,6 +30,7 @@ struct cpuidle_device;
>  
>  struct cpuidle_state {
>       char            name[CPUIDLE_NAME_LEN];
> +     char            desc[CPUIDLE_DESC_LEN];
>       void            *driver_data;
>  
>       unsigned int    flags;
> Index: linux-2.6.25-rc/drivers/cpuidle/cpuidle.c
> ===================================================================
> --- linux-2.6.25-rc.orig/drivers/cpuidle/cpuidle.c
> +++ linux-2.6.25-rc/drivers/cpuidle/cpuidle.c
> @@ -219,7 +219,8 @@ static void poll_idle_init(struct cpuidl
>  
>       cpuidle_set_statedata(state, NULL);
>  
> -     snprintf(state->name, CPUIDLE_NAME_LEN, "C0 (poll idle)");
> +     snprintf(state->name, CPUIDLE_NAME_LEN, "C0");
> +     snprintf(state->desc, CPUIDLE_DESC_LEN, "CPUIDLE CORE POLL IDLE");
>       state->exit_latency = 0;
>       state->target_residency = 0;
>       state->power_usage = -1;
> -
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to