Hi,
On Fri, Dec 11, 2015 at 11:02 PM, Simon Arlott <si...@fire.lp0.eu> wrote:
> Add partitioning support for BCM963268 boards with CFE bootloaders.
> The following partitions are defined:
> "boot": CFE and nvram data
> "rootfs": Currently selected rootfs
> "data": Configuration data
> "rootfs1_update": Container for the whole flash area used
> for the first rootfs to allow it to be
> updated.
> "rootfs2_update": Container for the whole flash area used
> for the second rootfs to allow it to be
> updated.
> "rootfs_other": The other (not currently selected) rootfs
This isn't BCM963268 specific, this is BCM63XX NAND specific and used
since the first SoC with a NAND controller (BCM6368).
>
> Example:
> [ 1.904302] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
> [ 1.911000] nand: Macronix NAND 128MiB 3,3V 8-bit
> [ 1.915855] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB
> size: 64
> [ 1.923797] bcm6368_nand 10000200.nand: detected 128MiB total, 128KiB
> blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
> [ 1.936994] Bad block table found at page 65472, version 0x01
> [ 1.944121] Bad block table found at page 65408, version 0x01
> [ 1.951166] nand_read_bbt: bad block at 0x000007480000
> [ 1.969377] bcm963268part: rootfs1: CFE boot tag found at 0x20000 with
> version 6, board type 963168VX
> [ 1.980690] bcm963268part: rootfs2: CFE boot tag found at 0x4000000 with
> version 6, board type 963168VX
> [ 1.990801] bcm963268part: CFE bootline selected latest image rootfs1
> (rootfs1_seq=2, rootfs2_seq=1)
> [ 2.022080] 6 bcm963268part partitions found on MTD device brcmnand.0
> [ 2.042659] Creating 6 MTD partitions on "brcmnand.0":
> [ 2.048025] 0x000000000000-0x000000020000 : "boot"
> [ 2.062134] 0x000000040000-0x000001120000 : "rootfs"
> [ 2.077632] 0x000007b00000-0x000007f00000 : "data"
> [ 2.091363] 0x000000020000-0x000003ac0000 : "rootfs1_update"
> [ 2.106228] 0x000004000000-0x000007ac0000 : "rootfs2_update"
> [ 2.121093] 0x000004020000-0x000005060000 : "rootfs_other"
>
> The nvram contains the offset and size of the boot, rootfs1, rootfs2
> and data partitions. The presence of CFE and nvram is verified by
> reading from the boot partition which is assumed to be at offset 0
> and the process aborts if the nvram read indicates that this is not
> the case.
>
> There is bcm_tag information at the start of each rootfs that is used
> to determine which rootfs is newer and what its real offset/size is.
>
> The CFE bootline is used to select a rootfs.
>
> Signed-off-by: Simon Arlott <si...@fire.lp0.eu>
> ---
> v3: Use COMPILE_TEST.
>
> Ensure that strings read from flash are null terminated and validate
> bcm_tag integer values (this also moves reporting of rootfs sequence
> numbers to later on).
>
> v2: Use external struct bcm963xx_nvram definition for bcm963268part.
>
> Removed support for the nand partition number field, it's not a
> standard Broadcom field (was added by MitraStar Technology Corp.).
>
> drivers/mtd/Kconfig | 21 +++
> drivers/mtd/Makefile | 1 +
> drivers/mtd/bcm963268part.c | 350
> ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 372 insertions(+)
> create mode 100644 drivers/mtd/bcm963268part.c
>
> diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
> index 42cc953..8209730 100644
> --- a/drivers/mtd/Kconfig
> +++ b/drivers/mtd/Kconfig
> @@ -148,6 +148,27 @@ config MTD_BCM63XX_PARTS
> This provides partions parsing for BCM63xx devices with CFE
> bootloaders.
>
> +config MTD_BCM963268_PARTS
> + tristate "BCM963268 CFE partitioning support"
> + depends on BMIPS_GENERIC || COMPILE_TEST
Since you include from arch/mips/include, this will fail to compile on
everything != MIPS
> + select CRC32
> + help
> + This provides partitions parsing for BCM963268 boards with CFE
> + bootloaders. The following partitions are defined:
> + "boot": CFE and nvram data
> + "rootfs": Currently selected rootfs
> + "data": Configuration data
> + "rootfs1_update": Container for the whole flash area used
> + for the first rootfs to allow it to be
> + updated.
> + "rootfs2_update": Container for the whole flash area used
> + for the second rootfs to allow it to be
> + updated.
> + "rootfs_other": The other (not currently selected) rootfs
> +
> + A decision is made regarding which of the two rootfs is to be
> + used based on the nvram data.
> +
> config MTD_BCM47XX_PARTS
> tristate "BCM47XX partitioning support"
> depends on BCM47XX || ARCH_BCM_5301X
> diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
> index 99bb9a1..f0f4140 100644
> --- a/drivers/mtd/Makefile
> +++ b/drivers/mtd/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
> obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
> obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
> obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
> +obj-$(CONFIG_MTD_BCM963268_PARTS) += bcm963268part.o
> obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
>
> # 'Users' - code which presents functionality to userspace.
> diff --git a/drivers/mtd/bcm963268part.c b/drivers/mtd/bcm963268part.c
> new file mode 100644
> index 0000000..2740a48
> --- /dev/null
> +++ b/drivers/mtd/bcm963268part.c
> @@ -0,0 +1,350 @@
> +/*
> + * BCM963268 CFE image tag parser
> + * Copyright 2015 Simon Arlott
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Derived from drivers/mtd/bcm63xxpart.c:
> + * Copyright © 2006-2008 Florian Fainelli <flor...@openwrt.org>
> + * Mike Albon <mal...@openwrt.org>
> + * Copyright © 2009-2010 Daniel Dickinson <open...@cshore.neomailbox.net>
> + * Copyright © 2011-2013 Jonas Gorski <jonas.gor...@gmail.com>
> + *
> + * Derived from
> bcm963xx_4.12L.06B_consumer/bcmdrivers/opensource/char/board/bcm963xx/impl1/board.c,
> + *
> bcm963xx_4.12L.06B_consumer/shared/opensource/include/bcm963xx/bcm_hwdefs.h:
> + * Copyright (c) 2002 Broadcom Corporation
> + */
> +
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> +#include <linux/crc32.h>
> +#include <linux/if_ether.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/sizes.h>
> +#include <linux/slab.h>
> +#include <linux/vmalloc.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +
> +#include <asm/mach-bcm63xx/bcm963xx_tag.h>
Why not move that one as well? Then you don't need to depend on MIPS
for COMPILE_TEST.
> +#include <uapi/linux/bcm963xx_nvram.h>
> +
> +/* Extended flash address, needs to be subtracted from bcm_tag flash offsets
> */
> +#define BCM63XX_EXTENDED_SIZE 0xBFC00000
This should be in bcm963xx_tag.h.
> +
> +#define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
> +#define BCM963XX_CFE_VERSION_OFFSET 0x570
> +#define BCM963XX_NVRAM_OFFSET 0x580
You should decide whether you want to call it BCM63XX (the SoC) or
BCM963XX (the Board using the SoC). Also probably better served in
bcm963xx_nvram.h
> +
> +enum bcm963268_nvram_part {
> + PART_BOOT = 0,
> + PART_ROOTFS_1,
> + PART_ROOTFS_2,
> + PART_DATA,
> + PART_BBT,
> +};
This should be in bcm963xx_nvram.h.
> +
> +/* Ensure strings read from flash structs are null terminated */
> +#define STR_NULL_TERMINATE(x) \
> + do { char *_str = (x); _str[sizeof(x) - 1] = 0; } while (0)
> +
> +static int bcm963268_detect_cfe(struct mtd_info *master)
> +{
> + char buf[9];
> + int ret;
> + size_t retlen;
> +
> + ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
> + (void *)buf);
> + buf[retlen] = 0;
> +
> + if (ret < 0)
> + return ret;
> +
> + if (strncmp("cfe-v", buf, 5) == 0)
> + return 0;
> +
> + return -EINVAL;
> +}
> +
> +static int bcm963268_read_nvram(struct mtd_info *master,
> + struct bcm963xx_nvram *nvram)
> +{
> + u32 crc, expected_crc;
> + size_t retlen;
> + int ret;
> +
> + /* extract nvram data */
> + ret = mtd_read(master, BCM963XX_NVRAM_OFFSET, BCM963XX_NVRAM_V6_SIZE,
> + &retlen, (void *)nvram);
> +
> + if (ret < 0)
> + return ret;
> +
> + if (nvram->version < 6) {
> + pr_warn("nvram version %d not supported\n", nvram->version);
> + return -EINVAL;
> + }
> +
> + /* check checksum before using data */
> + expected_crc = nvram->checksum_v6;
> + nvram->checksum_v6 = 0;
> +
> + crc = crc32_le(~0, (u8 *)nvram, BCM963XX_NVRAM_V6_SIZE);
> +
> + if (crc != expected_crc)
> + pr_warn("nvram checksum failed, contents may be invalid
> (expected %08x, got %08x)\n",
> + expected_crc, crc);
> +
> + return 0;
> +}
> +
> +static bool bcm963268_boot_latest(struct bcm963xx_nvram *nvram)
> +{
> + char *p;
> +
> + STR_NULL_TERMINATE(nvram->bootline);
> +
> + /* Find previous image parameter "p" */
> + if (!strncmp(nvram->bootline, "p=", 2))
> + p = nvram->bootline;
> + else
> + p = strstr(nvram->bootline, " p=");
> +
> + if (p == NULL)
> + return true;
> +
> + p += 2;
> + if (*p == '\0')
> + return true;
'\0' is also != '0', so this check is also covered by the following comparison.
> +
> + return *p != '0';
> +}
> +
> +static bool bcm963268_parse_rootfs_tag(struct mtd_info *master,
> + const char *name, loff_t rootfs_part, u64 *rootfs_offset,
> + u64 *rootfs_size, unsigned int *rootfs_sequence)
> +{
> + struct bcm_tag *buf;
> + int ret;
> + size_t retlen;
> + u32 computed_crc;
> + bool rootfs_ok = false;
> +
> + *rootfs_offset = 0;
> + *rootfs_size = 0;
> + *rootfs_sequence = 0;
> +
> + buf = vmalloc(sizeof(struct bcm_tag));
> + if (!buf)
> + goto out;
> +
> + ret = mtd_read(master, rootfs_part, sizeof(*buf), &retlen, (void
> *)buf);
> + if (ret < 0)
> + goto out;
> +
> + if (retlen != sizeof(*buf))
> + goto out;
> +
> + computed_crc = crc32_le(IMAGETAG_CRC_START, (u8 *)buf,
> + offsetof(struct bcm_tag, header_crc));
> + if (computed_crc == buf->header_crc) {
> + STR_NULL_TERMINATE(buf->board_id);
> + STR_NULL_TERMINATE(buf->tag_version);
> +
> + pr_info("%s: CFE boot tag found at 0x%llx with version %s,
> board type %s\n",
> + name, rootfs_part, buf->tag_version, buf->board_id);
> +
> + /* Get rootfs offset and size from tag data */
> + STR_NULL_TERMINATE(buf->flash_image_start);
> + if (kstrtou64(buf->flash_image_start, 10, rootfs_offset) ||
> + *rootfs_offset < BCM63XX_EXTENDED_SIZE) {
> + pr_err("%s: invalid rootfs offset: %*ph\n", name,
> + sizeof(buf->flash_image_start),
> + buf->flash_image_start);
> + goto out;
> + }
what are the values for kernel(len)? if these are zero, it might make
sense to merge the two parsers, or at least have them in a single
compile unit to have them share the tag parsing code.
> +
> + STR_NULL_TERMINATE(buf->root_length);
> + if (kstrtou64(buf->root_length, 10, rootfs_size) ||
> + rootfs_size == 0) {
> + pr_err("%s: invalid rootfs size: %*ph\n", name,
> + sizeof(buf->root_length), buf->root_length);
> + goto out;
> + }
> +
> + /* Adjust for flash offset */
> + *rootfs_offset -= BCM63XX_EXTENDED_SIZE;
> +
> + /* Remove bcm_tag data from length */
> + *rootfs_size -= *rootfs_offset - rootfs_part;
> +
> + /* Get image sequence number to determine which one is newer
> */
> + STR_NULL_TERMINATE(buf->dual_image);
> + if (kstrtouint(buf->dual_image, 10, rootfs_sequence)) {
You should probably just rename and fixup the dual_image part to
image_sequence, length 4.
> + pr_err("%s: invalid rootfs sequence: %*ph\n", name,
> + sizeof(buf->dual_image), buf->dual_image);
> + goto out;
> + }
> +
> + rootfs_ok = true;
> + } else {
> + pr_warn("%s: CFE boot tag at 0x%llx CRC invalid (expected
> %08x, actual %08x)\n",
> + name, rootfs_part, buf->header_crc, computed_crc);
> + goto out;
> + }
> +
> +out:
> + vfree(buf);
> + return rootfs_ok;
> +}
> +
> +static int bcm963268_parse_cfe_partitions(struct mtd_info *master,
> + const struct mtd_partition **pparts, struct mtd_part_parser_data
> *data)
> +{
> + int nrparts, curpart;
> + struct bcm963xx_nvram *nvram = NULL;
> + struct mtd_partition *parts;
> + u64 rootfs1_off, rootfs1_size;
> + unsigned int rootfs1_seq;
> + u64 rootfs2_off, rootfs2_size;
> + unsigned int rootfs2_seq;
> + bool rootfs1, rootfs2;
> + bool use_first;
> + int ret;
> +
> + if (bcm963268_detect_cfe(master)) {
> + ret = -EINVAL;
> + goto out;
You haven't allocated nvram yet, just directly return -EINVAL.
> + }
> +
> + nvram = vzalloc(sizeof(*nvram));
> + if (!nvram) {
> + ret = -ENOMEM;
> + goto out;
Similar here.
> + }
> +
> + if (bcm963268_read_nvram(master, nvram)) {
> + ret = -EINVAL;
Why not pass on the return value of _read_nvram?
> + goto out;
> + }
> +
> + /* We've just read the nvram from offset 0,
> + * so it must be located there.
> + */
> + if (nvram->nand_part_offset[PART_BOOT] != 0) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + /* Get the rootfs partition locations */
> + rootfs1 = bcm963268_parse_rootfs_tag(master, "rootfs1",
> + nvram->nand_part_offset[PART_ROOTFS_1] * SZ_1K,
> + &rootfs1_off, &rootfs1_size, &rootfs1_seq);
> + rootfs2 = bcm963268_parse_rootfs_tag(master, "rootfs2",
> + nvram->nand_part_offset[PART_ROOTFS_2] * SZ_1K,
> + &rootfs2_off, &rootfs2_size, &rootfs2_seq);
> + if (!rootfs1 && !rootfs2) {
> + ret = -EINVAL;
While it might be nice in theory to still have the _update partitions
for flashing on an "uninitialized" flash, in practice this case is
unreachable, as CFE *needs* a working rootfs to function, and the
device is basically bricked if both are invalid.
> (snip rest)
Jonas
--
To unsubscribe from this list: send the line "unsubscribe linux-api" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
