On 08/02/2011 12:13 PM, Anirudh Ghayal wrote:
From: Amy Maloche<amalo...@codeaurora.org>Add support for pm8xx based vibrator to facilitate haptics. This module uses the ff-memless framework. Cc: Dmitry Torokhov<dmitry.torok...@gmail.com> Signed-off-by: Amy Maloche<amalo...@codeaurora.org> Signed-off-by: Anirudh Ghayal<agha...@codeaurora.org> --- Changes: Addressed Dmitry's comments from the previous RFC submission. lkml.org/lkml/2011/2/2/53 drivers/input/misc/Kconfig | 12 ++ drivers/input/misc/Makefile | 1 + drivers/input/misc/pm8xxx-vibrator.c | 309 ++++++++++++++++++++++++++++++++++ 3 files changed, 322 insertions(+), 0 deletions(-) create mode 100644 drivers/input/misc/pm8xxx-vibrator.c diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index c9104bb..50b9e1b 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -74,6 +74,18 @@ config INPUT_PCSPKR To compile this driver as a module, choose M here: the module will be called pcspkr. +config INPUT_PM8XXX_VIBRATOR + tristate "Qualcomm PM8XXX vibrator support" + depends on MFD_PM8XXX + select INPUT_FF_MEMLESS + help + This option enables device driver support for the vibrator + on Qualcomm PM8xxx chip. This driver supports ff-memless interface + from input framework. + + To compile this driver as module, choose M here: the + module will be called pm8xxx-vibrator. + config INPUT_SPARCSPKR tristate "SPARC Speaker support" depends on PCI&& SPARC64 diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 299ad5e..40ebe2b 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o +obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c new file mode 100644 index 0000000..cb2d3ad --- /dev/null +++ b/drivers/input/misc/pm8xxx-vibrator.c @@ -0,0 +1,309 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include<linux/module.h> +#include<linux/init.h> +#include<linux/kernel.h> +#include<linux/errno.h> +#include<linux/platform_device.h> +#include<linux/input.h> +#include<linux/slab.h> +#include<linux/mfd/pm8xxx/core.h> + +#define VIB_DRV 0x4A + +#define VIB_DRV_SEL_MASK 0xf8 +#define VIB_DRV_SEL_SHIFT 0x03 +#define VIB_DRV_EN_MANUAL_MASK 0xfc + +#define VIB_MAX_LEVEL_mV (3100) +#define VIB_MIN_LEVEL_mV (1200) +#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV) + +#define MAX_FF_SPEED 0xff + +/* + * struct pm8xxx_vib - structure to hold vibrator data + * @vib_input_dev: input device supporting force feedback + * @vwork: work structure to set the vibration parameters
Anirudh, It's should be @work?
+ * @dev: device supporting force feedback + * @speed: speed of vibration set from userland + * @state: state of vibrator + * @level: level of vibration to set in the chip + * @reg_vib_drv: VIB_DRV register value + * + */
Thanks Best Regards Wanlong Gao -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
