Reviewed-by: Yaniv Gardi <yga...@codeaurora.org>

QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


= > -----Original Message-----
= > From: linux-scsi-ow...@vger.kernel.org [mailto:linux-scsi-
= > ow...@vger.kernel.org] On Behalf Of Dolev Raviv
= > Sent: Monday, August 12, 2013 4:02 PM
= > To: Sujit Reddy Thumma
= > Cc: Vinayak Holikatti; Santosh Y; James E.J. Bottomley; linux-
= > s...@vger.kernel.org; Sujit Reddy Thumma; linux-arm-
= > m...@vger.kernel.org
= > Subject: Re: [PATCH V5 2/4] scsi: ufs: Fix hardware race conditions
while
= > aborting a command
= > 
= > Tested-by: Dolev Raviv <dra...@codeaurora.org>
= > 
= > > There is a possible race condition in the hardware when the abort
= > > command is issued to terminate the ongoing SCSI command as described
= > > below:
= > >
= > > - A bit in the door-bell register is set in the controller for a
= > >   new SCSI command.
= > > - In some rare situations, before controller get a chance to issue
= > >   the command to the device, the software issued an abort command.
= > > - If the device recieves abort command first then it returns success
= > >   because the command itself is not present.
= > > - Now if the controller commits the command to device it will be
= > >   processed.
= > > - Software thinks that command is aborted and proceed while still
= > >   the device is processing it.
= > > - The software, controller and device may go out of sync because of
= > >   this race condition.
= > >
= > > To avoid this, query task presence in the device before sending abort
= > > task command so that after the abort operation, the command is
= > > guaranteed to be non-existent in both controller and the device.
= > >
= > > Signed-off-by: Sujit Reddy Thumma <sthu...@codeaurora.org>
= > > ---
= > >  drivers/scsi/ufs/ufshcd.c |   70
= > > +++++++++++++++++++++++++++++++++++---------
= > >  1 files changed, 55 insertions(+), 15 deletions(-)
= > >
= > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
= > > index d7f3746..d4ee48d 100644
= > > --- a/drivers/scsi/ufs/ufshcd.c
= > > +++ b/drivers/scsi/ufs/ufshcd.c
= > > @@ -2485,6 +2485,12 @@ static int ufshcd_host_reset(struct scsi_cmnd
= > *cmd)
= > >   * ufshcd_abort - abort a specific command
= > >   * @cmd: SCSI command pointer
= > >   *
= > > + * Abort the pending command in device by sending UFS_ABORT_TASK
= > task
= > > management
= > > + * command, and in host controller by clearing the door-bell
register.
= > > There can
= > > + * be race between controller sending the command to the device while
= > > abort is
= > > + * issued. To avoid that, first issue UFS_QUERY_TASK to check if the
= > > command is
= > > + * really issued and then try to abort it.
= > > + *
= > >   * Returns SUCCESS/FAILED
= > >   */
= > >  static int ufshcd_abort(struct scsi_cmnd *cmd) @@ -2493,7 +2499,8
= > @@
= > > static int ufshcd_abort(struct scsi_cmnd *cmd)
= > >   struct ufs_hba *hba;
= > >   unsigned long flags;
= > >   unsigned int tag;
= > > - int err;
= > > + int err = 0;
= > > + int poll_cnt;
= > >   u8 resp = 0xF;
= > >   struct ufshcd_lrb *lrbp;
= > >
= > > @@ -2501,33 +2508,59 @@ static int ufshcd_abort(struct scsi_cmnd
= > *cmd)
= > >   hba = shost_priv(host);
= > >   tag = cmd->request->tag;
= > >
= > > - spin_lock_irqsave(host->host_lock, flags);
= > > + /* If command is already aborted/completed, return SUCCESS */
= > > + if (!(test_bit(tag, &hba->outstanding_reqs)))
= > > +         goto out;
= > >
= > > - /* check if command is still pending */
= > > - if (!(test_bit(tag, &hba->outstanding_reqs))) {
= > > -         err = FAILED;
= > > -         spin_unlock_irqrestore(host->host_lock, flags);
= > > + lrbp = &hba->lrb[tag];
= > > + for (poll_cnt = 100; poll_cnt; poll_cnt--) {
= > > +         err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag,
= > > +                         UFS_QUERY_TASK, &resp);
= > > +         if (!err && resp ==
= > UPIU_TASK_MANAGEMENT_FUNC_SUCCEEDED) {
= > > +                 /* cmd pending in the device */
= > > +                 break;
= > > +         } else if (!err && resp ==
= > UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
= > > +                 u32 reg;
= > > +
= > > +                 /*
= > > +                  * cmd not pending in the device, check if it is
= > > +                  * in transition.
= > > +                  */
= > > +                 reg = ufshcd_readl(hba,
= > REG_UTP_TRANSFER_REQ_DOOR_BELL);
= > > +                 if (reg & (1 << tag)) {
= > > +                         /* sleep for max. 2ms to stabilize */
= > > +                         usleep_range(1000, 2000);
= > > +                         continue;
= > > +                 }
= > > +                 /* command completed already */
= > > +                 goto out;
= > > +         } else {
= > > +                 if (!err)
= > > +                         err = resp; /* service response error */
= > > +                 goto out;
= > > +         }
= > > + }
= > > +
= > > + if (!poll_cnt) {
= > > +         err = -EBUSY;
= > >           goto out;
= > >   }
= > > - spin_unlock_irqrestore(host->host_lock, flags);
= > >
= > > - lrbp = &hba->lrb[tag];
= > >   err = ufshcd_issue_tm_cmd(hba, lrbp->lun, lrbp->task_tag,
= > >                   UFS_ABORT_TASK, &resp);
= > >   if (err || resp != UPIU_TASK_MANAGEMENT_FUNC_COMPL) {
= > > -         err = FAILED;
= > > +         if (!err)
= > > +                 err = resp; /* service response error */
= > >           goto out;
= > > - } else {
= > > -         err = SUCCESS;
= > >   }
= > >
= > > + err = ufshcd_clear_cmd(hba, tag);
= > > + if (err)
= > > +         goto out;
= > > +
= > >   scsi_dma_unmap(cmd);
= > >
= > >   spin_lock_irqsave(host->host_lock, flags);
= > > -
= > > - /* clear the respective UTRLCLR register bit */
= > > - ufshcd_utrl_clear(hba, tag);
= > > -
= > >   __clear_bit(tag, &hba->outstanding_reqs);
= > >   hba->lrb[tag].cmd = NULL;
= > >   spin_unlock_irqrestore(host->host_lock, flags); @@ -2535,6
= > +2568,13
= > > @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
= > >   clear_bit_unlock(tag, &hba->lrb_in_use);
= > >   wake_up(&hba->dev_cmd.tag_wq);
= > >  out:
= > > + if (!err) {
= > > +         err = SUCCESS;
= > > + } else {
= > > +         dev_err(hba->dev, "%s: failed with err %d\n", __func__,
= > err);
= > > +         err = FAILED;
= > > + }
= > > +
= > >   return err;
= > >  }
= > >
= > > --
= > > QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a
= > > member of Code Aurora Forum, hosted by The Linux Foundation.
= > >
= > > --
= > > To unsubscribe from this list: send the line "unsubscribe linux-scsi"
= > > in the body of a message to majord...@vger.kernel.org More
= > majordomo
= > > info at  http://vger.kernel.org/majordomo-info.html
= > >
= > 
= > 
= > --
= > QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a
= > member of Code Aurora Forum, hosted by The Linux Foundation
= > 
= > --
= > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the
= > body of a message to majord...@vger.kernel.org More majordomo info
= > at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to