Georgi, On Tue, Sep 2, 2014 at 5:40 PM, Georgi Djakov <gdja...@mm-sol.com> wrote: > Enable support for the two SD host controllers on the APQ8084 platform > by adding the required nodes to the DT files. > On the IFC6540 board, the first controller is connected to the onboard > eMMC and the second is connected to a micro-SD card slot.
testing this set of patch on IFC6540, i noticed that not all partitions from the eMMC are detected. booting [1] which is basically 3.17-rc7 with a few additional patches, i can see the following relevant mmc traces: [ 1.162587] mmc0: BKOPS_EN bit is not set [ 1.315357] mmc0: new HS200 MMC card at address 0001 [ 1.318098] mmcblk0: mmc0:0001 SEM16G 14.6 GiB [ 1.330377] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.333652] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.345424] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 1.358135] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 [ 1.365902] mmcblk0boot1: p1 [ 1.367833] mmcblk0boot0: unknown partition table on the same board, booting the board vendor kernel (which is based on QCOM 3.10 tree), i can see much more partitions: [ 7.662379] mmc0: BKOPS_EN bit = 0 [ 7.673036] mmc0: new HS200 MMC card at address 0001 [ 7.673784] mmcblk0: mmc0:0001 SEM16G 14.6 GiB [ 7.674311] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 7.677967] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24\ p25 the complete dmesg log for can be found in our board lab, at [2] cheers [1] https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/commit/b538bdefecd11bd0278cc31164e1078c1722e5a8 [2] http://armv7.com/scheduler/job/11726/log_file#L_11_11 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html