On 05/11/14 00:01, Hartmut Knaack wrote:
> Ivan T. Ivanov schrieb am 03.11.2014 16:24:
>> From: Stanimir Varbanov <svarba...@mm-sol.com>
>>
>> Document DT binding for Qualcomm SPMI PMIC voltage ADC
>> driver.
>>
>> Signed-off-by: Stanimir Varbanov <svarba...@mm-sol.com>
>> Signed-off-by: Ivan T. Ivanov <iiva...@mm-sol.com>
This looks more or less fine to me. One probable typo inline.
As Mark was kind enough to review the earlier version I'd like
to let it sit for a while to see if he has time to have another look
(perhaps at v5 with the trivial bits fixed up!)
>> ---
>> .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 129
>> +++++++++++++++++++++
>> include/dt-bindings/iio/qcom,spmi-vadc.h | 119 +++++++++++++++++++
>> 2 files changed, 248 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>> create mode 100644 include/dt-bindings/iio/qcom,spmi-vadc.h
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>> b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>> new file mode 100644
>> index 0000000..2253813
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>> @@ -0,0 +1,129 @@
>> +Qualcomm's SPMI PMIC voltage ADC
>> +
>> +SPMI PMIC voltage ADC (VADC) provides interface to clients to read
>> +voltage. The VADC is a 15-bit sigma-delta ADC.
>> +
>> +VADC node:
>> +
>> +- compatible:
>> + Usage: required
>> + Value type: <string>
>> + Definition: Should contain "qcom,spmi-vadc".
>> +
>> +- reg:
>> + Usage: required
>> + Value type: <prop-encoded-array>
>> + Definition: VADC base address and length in the SPMI PMIC register map.
>> +
>> +- #address-cells:
>> + Usage: required
>> + Value type: <u32>
>> + Definition: Must be one. Child node 'reg' property should define ADC
>> + channel number.
>> +
>> +- #size-cells:
>> + Usage: required
>> + Value type: <u32>
>> + Definition: Must be zero.
>> +
>> +- #io-channel-cells:
>> + Usage: required
>> + Value type: <u32>
>> + Definition: Must be one. For details about IIO bindings see:
>> + Documentation/devicetree/bindings/iio/iio-bindings.txt
>> +
>> +- interrupts:
>> + Usage: optional
>> + Value type: <prop-encoded-array>
>> + Definition: End of conversion interrupt.
>> +
>> +Channel node properties:
>> +
>> +- reg:
>> + Usage: required
>> + Value type: <u32>
>> + Definition: ADC channel number.
>> + See include/dt-bindings/iio/qcom,spmi-vadc.h
>> +
>> +- qcom,decimation:
>> + Usage: optional
>> + Value type: <u32>
>> + Definition: This parameters is used to decrease ADC sampling rate.
> Typo: This parameter (singular)
>> + Quicker measurements can be made by reducing decimation ratio.
>> + Valid values are 512, 1024, 2048, 4096.
>> + If property is not found, default value of 512 will be used.
>> +
>> +- qcom,pre-scaling:
>> + Usage: optional
>> + Value type: <u32 array>
>> + Definition: Used for scaling the channel input signal before the signal
>> is
>> + fed to VADC. The configuration for this node is to know the
>> + pre-determined ratio and use it for post scaling. Select one
>> from
>> + the following options.
>> + <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
>> + If property is not found default value depending of chip will
>> be used.
on chip?
>> +
>> +- qcom,ratiometric:
>> + Usage: optional
>> + Value type: <empty>
>> + Definition: Channel calibration type. If this property is specified
>> + VADC will use the VDD reference (1.8V) and GND for channel
>> + calibration. If property is not found, channel will be
>> + calibrated with 0.625V and 1.25V reference channels, also
>> + known as absolute calibration.
>> +
>> +- qcom,hw-settle-time:
>> + Usage: optional
>> + Value type: <u32>
>> + Definition: Time between AMUX getting configured and the ADC starting
>> + conversion. Delay = 100us * (value) for value < 11, and
>> + 2ms * (value - 10) otherwise.
>> + Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
>> + 900 us and 1, 2, 4, 6, 8, 10 ms
>> + If property is not found, channel will use 0us.
>> +
>> +- qcom,avg-samples:
>> + Usage: optional
>> + Value type: <u32>
>> + Definition: Number of samples to be used for measurement.
>> + Averaging provides the option to obtain a single measurement
>> + from the ADC that is an average of multiple samples. The value
>> + selected is 2^(value).
>> + Valid values are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
>> + If property is not found, 1 sample will be used.
>> +
>> +NOTE:
>> +
>> +Following channels, also know as reference points channels, are used for
> Typos: <...> also known as reference point channels <...>
>> +result calibration and their channel configuration nodes should be defined:
>> +VADC_REF_625MV and/or VADC_SPARE1, based on PMIC version, VADC_REF_1250MV,
> Better put the "based on PMIC version" into parenthesis.
>> +VADC_GND_REF and VADC_VDD_VADC.
>> +
>> +Example:
>> +
>> + /* VADC node */
>> + pmic_vadc: vadc@3100 {
>> + compatible = "qcom,spmi-vadc";
>> + reg = <0x3100 0x100>;
>> + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #io-channel-cells = <1>;
>> + io-channel-ranges;
>> +
>> + /* Channel node */
>> + usb_id_nopull {
>> + reg = <VADC_LR_MUX10_USB_ID>;
>> + qcom,decimation = <512>;
>> + qcom,ratiometric;
>> + qcom,hw-settle-time = <200>;
>> + qcom,avg-samples = <1>;
>> + qcom,pre-scaling = <1 3>;
>> + };
>> + };
>> +
>> + /* IIO client node */
>> + usb {
>> + io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
>> + io-channel-names = "vadc";
>> + };
>> diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h
>> b/include/dt-bindings/iio/qcom,spmi-vadc.h
>> new file mode 100644
>> index 0000000..42121fa
>> --- /dev/null
>> +++ b/include/dt-bindings/iio/qcom,spmi-vadc.h
>> @@ -0,0 +1,119 @@
>> +/*
>> + * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 and
>> + * only version 2 as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H
>> +#define _DT_BINDINGS_QCOM_SPMI_VADC_H
>> +
>> +/* Voltage ADC channels */
>> +#define VADC_USBIN 0x00
>> +#define VADC_DCIN 0x01
>> +#define VADC_VCHG_SNS 0x02
>> +#define VADC_SPARE1_03 0x03
>> +#define VADC_USB_ID_MV 0x04
>> +#define VADC_VCOIN 0x05
>> +#define VADC_VBAT_SNS 0x06
>> +#define VADC_VSYS 0x07
>> +#define VADC_DIE_TEMP 0x08
>> +#define VADC_REF_625MV 0x09
>> +#define VADC_REF_1250MV 0x0a
>> +#define VADC_CHG_TEMP 0x0b
>> +#define VADC_SPARE1 0x0c
>> +#define VADC_SPARE2 0x0d
>> +#define VADC_GND_REF 0x0e
>> +#define VADC_VDD_VADC 0x0f
>> +
>> +#define VADC_P_MUX1_1_1 0x10
>> +#define VADC_P_MUX2_1_1 0x11
>> +#define VADC_P_MUX3_1_1 0x12
>> +#define VADC_P_MUX4_1_1 0x13
>> +#define VADC_P_MUX5_1_1 0x14
>> +#define VADC_P_MUX6_1_1 0x15
>> +#define VADC_P_MUX7_1_1 0x16
>> +#define VADC_P_MUX8_1_1 0x17
>> +#define VADC_P_MUX9_1_1 0x18
>> +#define VADC_P_MUX10_1_1 0x19
>> +#define VADC_P_MUX11_1_1 0x1a
>> +#define VADC_P_MUX12_1_1 0x1b
>> +#define VADC_P_MUX13_1_1 0x1c
>> +#define VADC_P_MUX14_1_1 0x1d
>> +#define VADC_P_MUX15_1_1 0x1e
>> +#define VADC_P_MUX16_1_1 0x1f
>> +
>> +#define VADC_P_MUX1_1_3 0x20
>> +#define VADC_P_MUX2_1_3 0x21
>> +#define VADC_P_MUX3_1_3 0x22
>> +#define VADC_P_MUX4_1_3 0x23
>> +#define VADC_P_MUX5_1_3 0x24
>> +#define VADC_P_MUX6_1_3 0x25
>> +#define VADC_P_MUX7_1_3 0x26
>> +#define VADC_P_MUX8_1_3 0x27
>> +#define VADC_P_MUX9_1_3 0x28
>> +#define VADC_P_MUX10_1_3 0x29
>> +#define VADC_P_MUX11_1_3 0x2a
>> +#define VADC_P_MUX12_1_3 0x2b
>> +#define VADC_P_MUX13_1_3 0x2c
>> +#define VADC_P_MUX14_1_3 0x2d
>> +#define VADC_P_MUX15_1_3 0x2e
>> +#define VADC_P_MUX16_1_3 0x2f
>> +
>> +#define VADC_LR_MUX1_BAT_THERM 0x30
>> +#define VADC_LR_MUX2_BAT_ID 0x31
>> +#define VADC_LR_MUX3_XO_THERM 0x32
>> +#define VADC_LR_MUX4_AMUX_THM1 0x33
>> +#define VADC_LR_MUX5_AMUX_THM2 0x34
>> +#define VADC_LR_MUX6_AMUX_THM3 0x35
>> +#define VADC_LR_MUX7_HW_ID 0x36
>> +#define VADC_LR_MUX8_AMUX_THM4 0x37
>> +#define VADC_LR_MUX9_AMUX_THM5 0x38
>> +#define VADC_LR_MUX10_USB_ID 0x39
>> +#define VADC_AMUX_PU1 0x3a
>> +#define VADC_AMUX_PU2 0x3b
>> +#define VADC_LR_MUX3_BUF_XO_THERM 0x3c
>> +
>> +#define VADC_LR_MUX1_PU1_BAT_THERM 0x70
>> +#define VADC_LR_MUX2_PU1_BAT_ID 0x71
>> +#define VADC_LR_MUX3_PU1_XO_THERM 0x72
>> +#define VADC_LR_MUX4_PU1_AMUX_THM1 0x73
>> +#define VADC_LR_MUX5_PU1_AMUX_THM2 0x74
>> +#define VADC_LR_MUX6_PU1_AMUX_THM3 0x75
>> +#define VADC_LR_MUX7_PU1_AMUX_HW_ID 0x76
>> +#define VADC_LR_MUX8_PU1_AMUX_THM4 0x77
>> +#define VADC_LR_MUX9_PU1_AMUX_THM5 0x78
>> +#define VADC_LR_MUX10_PU1_AMUX_USB_ID 0x79
>> +#define VADC_LR_MUX3_BUF_PU1_XO_THERM 0x7c
>> +
>> +#define VADC_LR_MUX1_PU2_BAT_THERM 0xb0
>> +#define VADC_LR_MUX2_PU2_BAT_ID 0xb1
>> +#define VADC_LR_MUX3_PU2_XO_THERM 0xb2
>> +#define VADC_LR_MUX4_PU2_AMUX_THM1 0xb3
>> +#define VADC_LR_MUX5_PU2_AMUX_THM2 0xb4
>> +#define VADC_LR_MUX6_PU2_AMUX_THM3 0xb5
>> +#define VADC_LR_MUX7_PU2_AMUX_HW_ID 0xb6
>> +#define VADC_LR_MUX8_PU2_AMUX_THM4 0xb7
>> +#define VADC_LR_MUX9_PU2_AMUX_THM5 0xb8
>> +#define VADC_LR_MUX10_PU2_AMUX_USB_ID 0xb9
>> +#define VADC_LR_MUX3_BUF_PU2_XO_THERM 0xbc
>> +
>> +#define VADC_LR_MUX1_PU1_PU2_BAT_THERM 0xf0
>> +#define VADC_LR_MUX2_PU1_PU2_BAT_ID 0xf1
>> +#define VADC_LR_MUX3_PU1_PU2_XO_THERM 0xf2
>> +#define VADC_LR_MUX4_PU1_PU2_AMUX_THM1 0xf3
>> +#define VADC_LR_MUX5_PU1_PU2_AMUX_THM2 0xf4
>> +#define VADC_LR_MUX6_PU1_PU2_AMUX_THM3 0xf5
>> +#define VADC_LR_MUX7_PU1_PU2_AMUX_HW_ID 0xf6
>> +#define VADC_LR_MUX8_PU1_PU2_AMUX_THM4 0xf7
>> +#define VADC_LR_MUX9_PU1_PU2_AMUX_THM5 0xf8
>> +#define VADC_LR_MUX10_PU1_PU2_AMUX_USB_ID 0xf9
>> +#define VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM 0xfc
>> +
>> +#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
