Add support for clocks that are controlled by the RPM processor on Qualcomm msm8916 based platforms.
Signed-off-by: Georgi Djakov <georgi.dja...@linaro.org> --- .../devicetree/bindings/clock/qcom,rpmcc.txt | 35 ++++ drivers/clk/qcom/Kconfig | 8 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/rpmcc.c | 206 ++++++++++++++++++++ include/dt-bindings/clock/qcom,rpmcc-msm8916.h | 44 +++++ 5 files changed, 294 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmcc.txt create mode 100644 drivers/clk/qcom/rpmcc.c create mode 100644 include/dt-bindings/clock/qcom,rpmcc-msm8916.h diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt new file mode 100644 index 000000000000..bd0fd0cd50dc --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -0,0 +1,35 @@ +Qualcomm RPM Clock Controller Binding +------------------------------------------------ +The RPM is a dedicated hardware engine for managing the shared +SoC resources in order to keep the lowest power profile. It +communicates with other hardware subsystems via shared memory +and accepts clock requests, aggregates the requests and turns +the clocks on/off or scales them on demand. + +Required properties : +- compatible : shall contain only one of the following: + + "qcom,rpmcc-msm8916" + +- #clock-cells : shall contain 1 + +Example: + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: qcom,rpmcc { + compatible = "qcom,rpmcc-msm8916"; + #clock-cells = <1>; + }; + }; + }; + }; diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index f06a331e9a24..29aaebcdeffa 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -12,6 +12,14 @@ config COMMON_CLK_QCOM select REGMAP_MMIO select RESET_CONTROLLER +config QCOM_RPMCC + tristate "Qualcomm RPM Clock Controller" + depends on QCOM_SMD_RPM && COMMON_CLK_QCOM + select QCOM_CLK_SMD_RPM + help + Support for the clocks exposed by the Resource Power Manager + processor on devices like apq8016, apq8084 and msm8974. + config APQ_GCC_8084 tristate "APQ8084 Global Clock Controller" select QCOM_GDSC diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile index b0bc0d3d585f..e58a567ddb42 100644 --- a/drivers/clk/qcom/Makefile +++ b/drivers/clk/qcom/Makefile @@ -11,6 +11,7 @@ clk-qcom-y += clk-regmap-mux.o clk-qcom-y += reset.o clk-qcom-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o +clk-qcom-$(CONFIG_QCOM_RPMCC) += rpmcc.o obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o diff --git a/drivers/clk/qcom/rpmcc.c b/drivers/clk/qcom/rpmcc.c new file mode 100644 index 000000000000..55d74a808356 --- /dev/null +++ b/drivers/clk/qcom/rpmcc.c @@ -0,0 +1,206 @@ +/* + * Copyright (c) 2015, Linaro Limited + * Copyright (c) 2014, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/soc/qcom/smd-rpm.h> + +#include "clk-smd-rpm.h" +#include <dt-bindings/clock/qcom,rpmcc-msm8916.h> + +#define CXO_ID 0x0 +#define QDSS_ID 0x1 +#define BUS_SCALING 0x2 + +#define PCNOC_ID 0x0 +#define SNOC_ID 0x1 +#define BIMC_ID 0x0 + +#define BB_CLK1_ID 0x1 +#define BB_CLK2_ID 0x2 +#define RF_CLK1_ID 0x4 +#define RF_CLK2_ID 0x5 + +struct rpm_cc { + struct qcom_rpm *rpm; + struct clk_onecell_data data; + struct clk *clks[]; +}; + +/* SMD clocks */ +DEFINE_CLK_SMD_RPM(pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, PCNOC_ID, NULL); +DEFINE_CLK_SMD_RPM(snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, SNOC_ID, NULL); +DEFINE_CLK_SMD_RPM(bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, BIMC_ID, NULL); + +DEFINE_CLK_SMD_RPM_BRANCH(xo, xo_a, QCOM_SMD_RPM_MISC_CLK, CXO_ID, 19200000); +DEFINE_CLK_SMD_RPM_QDSS(qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, QDSS_ID); + +/* SMD_XO_BUFFER */ +DEFINE_CLK_SMD_RPM_XO_BUFFER(bb_clk1, bb_clk1_a, BB_CLK1_ID); +DEFINE_CLK_SMD_RPM_XO_BUFFER(bb_clk2, bb_clk2_a, BB_CLK2_ID); +DEFINE_CLK_SMD_RPM_XO_BUFFER(rf_clk1, rf_clk1_a, RF_CLK1_ID); +DEFINE_CLK_SMD_RPM_XO_BUFFER(rf_clk2, rf_clk2_a, RF_CLK2_ID); + +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(bb_clk1_pin, bb_clk1_a_pin, BB_CLK1_ID); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(bb_clk2_pin, bb_clk2_a_pin, BB_CLK2_ID); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(rf_clk1_pin, rf_clk1_a_pin, RF_CLK1_ID); +DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(rf_clk2_pin, rf_clk2_a_pin, RF_CLK2_ID); + +static struct clk_smd_rpm *rpmcc_msm8916_clks[] = { + [RPM_XO_CLK_SRC] = &xo, + [RPM_XO_A_CLK_SRC] = &xo_a, + [RPM_PCNOC_CLK] = &pcnoc_clk, + [RPM_PCNOC_A_CLK] = &pcnoc_a_clk, + [RPM_SNOC_CLK] = &snoc_clk, + [RPM_SNOC_A_CLK] = &snoc_a_clk, + [RPM_BIMC_CLK] = &bimc_clk, + [RPM_BIMC_A_CLK] = &bimc_a_clk, + [RPM_QDSS_CLK] = &qdss_clk, + [RPM_QDSS_A_CLK] = &qdss_a_clk, + [RPM_BB_CLK1] = &bb_clk1, + [RPM_BB_CLK1_A] = &bb_clk1_a, + [RPM_BB_CLK2] = &bb_clk2, + [RPM_BB_CLK2_A] = &bb_clk2_a, + [RPM_RF_CLK1] = &rf_clk1, + [RPM_RF_CLK1_A] = &rf_clk1_a, + [RPM_RF_CLK2] = &rf_clk2, + [RPM_RF_CLK2_A] = &rf_clk2_a, + [RPM_BB_CLK1_PIN] = &bb_clk1_pin, + [RPM_BB_CLK1_A_PIN] = &bb_clk1_a_pin, + [RPM_BB_CLK2_PIN] = &bb_clk2_pin, + [RPM_BB_CLK2_A_PIN] = &bb_clk2_a_pin, + [RPM_RF_CLK1_PIN] = &rf_clk1_pin, + [RPM_RF_CLK1_A_PIN] = &rf_clk1_a_pin, + [RPM_RF_CLK2_PIN] = &rf_clk2_pin, + [RPM_RF_CLK2_A_PIN] = &rf_clk2_a_pin, +}; + +struct rpmcc_desc { + struct clk_smd_rpm **clks; + size_t num_clks; +}; + +static const struct rpmcc_desc rpmcc_msm8916 = { + .clks = rpmcc_msm8916_clks, + .num_clks = ARRAY_SIZE(rpmcc_msm8916_clks), +}; + +static const struct of_device_id rpmcc_match_table[] = { + { .compatible = "qcom,rpmcc-msm8916", .data = &rpmcc_msm8916}, + { } +}; +MODULE_DEVICE_TABLE(of, rpmcc_match_table); + +static int rpmcc_probe(struct platform_device *pdev) +{ + struct clk **clks; + struct clk *clk; + struct clk_smd_rpm **rpm_clks; + struct rpm_cc *rcc; + const struct rpmcc_desc *desc; + struct qcom_smd_rpm *rpm; + struct clk_onecell_data *data; + int ret, i; + size_t num_clks; + + rpm = dev_get_drvdata(pdev->dev.parent); + if (!rpm) { + dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n"); + return -ENODEV; + } + + desc = of_device_get_match_data(&pdev->dev); + if (!desc) + return -EINVAL; + + rpm_clks = desc->clks; + num_clks = desc->num_clks; + + rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*clks) * num_clks, + GFP_KERNEL); + if (!rcc) + return -ENOMEM; + + clks = rcc->clks; + data = &rcc->data; + data->clks = clks; + data->clk_num = num_clks; + + for (i = 0; i < num_clks; i++) { + if (!rpm_clks[i]) { + clks[i] = ERR_PTR(-ENOENT); + continue; + } + + rpm_clks[i]->rpm = rpm; + clk = devm_clk_register(&pdev->dev, &rpm_clks[i]->hw); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + clks[i] = clk; + } + + ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get, + data); + if (ret) + goto err; + + ret = clk_smd_rpm_enable_scaling(rpm); + if (ret) { + of_clk_del_provider(pdev->dev.of_node); + goto err; + } + + return 0; + +err: + dev_err(&pdev->dev, "Error registering RPMCC driver (%d)\n", ret); + return ret; +} + +static int rpmcc_remove(struct platform_device *pdev) +{ + of_clk_del_provider(pdev->dev.of_node); + return 0; +} + +static struct platform_driver rpmcc_driver = { + .driver = { + .name = "qcom-rpmcc", + .of_match_table = rpmcc_match_table, + }, + .probe = rpmcc_probe, + .remove = rpmcc_remove, +}; + +static int __init rpmcc_init(void) +{ + return platform_driver_register(&rpmcc_driver); +} +core_initcall(rpmcc_init); + +static void __exit rpmcc_exit(void) +{ + platform_driver_unregister(&rpmcc_driver); +} +module_exit(rpmcc_exit); + +MODULE_DESCRIPTION("Qualcomm RPM Clock Controller Driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:rpmcc"); diff --git a/include/dt-bindings/clock/qcom,rpmcc-msm8916.h b/include/dt-bindings/clock/qcom,rpmcc-msm8916.h new file mode 100644 index 000000000000..62d63940896a --- /dev/null +++ b/include/dt-bindings/clock/qcom,rpmcc-msm8916.h @@ -0,0 +1,44 @@ +/* + * Copyright 2015 Linaro Limited + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_8916_H +#define _DT_BINDINGS_CLK_MSM_RPMCC_8916_H + +#define RPM_XO_CLK_SRC 0 +#define RPM_XO_A_CLK_SRC 1 +#define RPM_PCNOC_CLK 2 +#define RPM_PCNOC_A_CLK 3 +#define RPM_SNOC_CLK 4 +#define RPM_SNOC_A_CLK 6 +#define RPM_BIMC_CLK 7 +#define RPM_BIMC_A_CLK 8 +#define RPM_QDSS_CLK 9 +#define RPM_QDSS_A_CLK 10 +#define RPM_BB_CLK1 11 +#define RPM_BB_CLK1_A 12 +#define RPM_BB_CLK2 13 +#define RPM_BB_CLK2_A 14 +#define RPM_RF_CLK1 15 +#define RPM_RF_CLK1_A 16 +#define RPM_RF_CLK2 17 +#define RPM_RF_CLK2_A 18 +#define RPM_BB_CLK1_PIN 19 +#define RPM_BB_CLK1_A_PIN 20 +#define RPM_BB_CLK2_PIN 21 +#define RPM_BB_CLK2_A_PIN 22 +#define RPM_RF_CLK1_PIN 23 +#define RPM_RF_CLK1_A_PIN 24 +#define RPM_RF_CLK2_PIN 25 +#define RPM_RF_CLK2_A_PIN 26 + +#endif -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html