On Tue, Jan 05, 2016 at 10:55:01AM +0530, Archit Taneja wrote: > Add DT bindings document for the Qualcomm NAND controller driver. > > Cc: devicet...@vger.kernel.org > Cc: Rob Herring <r...@kernel.org> > Signed-off-by: Archit Taneja <arch...@codeaurora.org> > --- > v5: > - Make changes to incorporate chip select sub nodes (brcmnand taken as > reference) > > v3: > - Don't use '0x' when specifying nand controller address space > - Add optional property for on-flash bbt usage > > .../devicetree/bindings/mtd/qcom_nandc.txt | 84 > ++++++++++++++++++++++ > 1 file changed, 84 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt > > diff --git a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt > b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt > new file mode 100644 > index 0000000..b2cf2d9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt > @@ -0,0 +1,84 @@ > +* Qualcomm NAND controller > + > +Required properties: > +- compatible: should be "qcom,ebi2-nand" for IPQ806x
More specific name please. > +- reg: MMIO address range > +- clocks: must contain core clock and always on clock > +- clock-names: must contain "core" for the core clock and > "aon" for the > + always on clock > +- dmas: DMA specifier, consisting of a phandle to the > ADM DMA > + controller node and the channel number to be used for > + NAND. Refer to dma.txt and qcom_adm.txt for more details > +- dma-names: must be "rxtx" > +- qcom,cmd-crci: must contain the ADM command type CRCI block instance > + number specified for the NAND controller on the given > + platform > +- qcom,data-crci: must contain the ADM data type CRCI block instance > + number specified for the NAND controller on the given > + platform > +- #address-cells: <1> - subnodes give the chip-select number > +- #size-cells: <0> > + > +* NAND chip-select > + > +Each controller may contain one or more subnodes to represent enabled > +chip-selects which (may) contain NAND flash chips. Their properties are as > +follows. > + > +Required properties: > +- compatible: should contain "qcom,nandcs" > +- reg: a single integer representing the chip-select > + number (e.g., 0, 1, 2, etc.) > +- #address-cells: see partition.txt > +- #size-cells: see partition.txt > +- nand-ecc-strength: number of bits to correct per ECC step. Must be 4 or 8 > + bits. > +- nand-ecc-step-size: bytes of data per ECC step. Must be 512. > + > +Optional properties: > +- nand-bus-width: bus width. Must be 8 or 16. If not present, 8 is chosen > + as default > + > +Each nandcs device node may optionally contain sub-nodes describing the flash > +partition mapping. See partition.txt for more detail. Can't the partitioning span across chip selects? After all, interleaving is how you get high performance. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
