I got trouble on downloading the Image and initrd to EDB7211 board through shoehorn3.2. Image is downloaded from http://web.bluemug.com/~miket/arm/images/Image-2.4.0-test6-rmk6-bluemug3.gz and initrd is download from http://web.bluemug.com/~miket/arm/initrds/initrd.ext2-busybox.gz) The command I used is as follow: ./shoehorn --edb7211 --port ttyS0 --loader loader.bin --kernel image-2.4.0.test6.rmk6-bluemug3 --initrd initrd.ext2-busybox but after download, nothing happen for the board. (except the LED near WAKEUP bottom continue to blink) Here's the output for shoehorn3.2: =================================================== Loading image-2.4.0.test6.rmk6-bluemug3: - start: 0xc0038000 size: 0x000ef2ac last: 0xc01272ab initrd_start is c1706000 Moving initrd_start to c1000000 Loading initrd.ext2-busybox: - start: 0xc1000000 size: 0x000fa000 last: 0xc10f9fff Writing parameter area - nr_pages (all banks): 4096 - rootdev: (RAMDISK_MAJOR, 0) - pages_in_bank[0]: 2048 - pages_in_bank[1]: 2048 - initrd_start: 0xc1000000 - initrd_size: 0xfa000 - ramdisk_size: 0xfa000 - start: 0xc0023000 size: 0x00000600 last: 0xc00235ff Switching back to 9600 baud Pinging loader Starting kernel =================================================== Actually I have also try to use the patch from your web site (patch-2.4.0-test6-rmk6-bluemug3) to make the image, but it still can't work. Please help! Cliff _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
