Michael Artz wrote:
> I guess what I am asking is when do I begin the angelboot command? I
> have blob installed and so it boots directly to that as soon as I power
> on, and if I run the command and then reset the machine, I get these
> same errors. Are these normal, or am I doing something stupid?
Strictly speaking, you don't run `angelboot' until you actually have a
copy of Angel on your board. =)
If your Assabet has socketed flash components, then you probably
received a pair of StrataFlash parts which had stickers bearing the
name, "Angel." You can just install these and go.
If your Assabet is a rev 5 board, or you otherwise don't have a way to
install pre-Angeled flashes, you can program your flashes with a copy of
Angel in exactly the same way you programmed blob onto your board.
Nicolas includes the file "Angel.bin" in his distribution of Jflash,
available from the same place you got angelboot.
Once you have Angel on your Assabet board, it will listen over UART1 for
communication from your development host (provided in this case by
angelboot).
-jd
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
