Hi,
We have a problem when the kernel boots, it has been mentioned many times in
arm-linux discussions with few clear solutions.
Here it is again:
The system hangs after executing the instruction to enable the mmu "mcr
p15, 0, r0, c1, c0" located in head-armv.S
r0 = 0xc000517d. We are in supervisor mode ( we have tested by checking
status ). We are using our own bootloader (customised) it is looseley based
on Blob. The system is sa1110, with 8Mb Flash and 32Mb RAM. At the moment we
have basic output working to some LEDs and Serial, but we cannot get any
output after this command, we do not have a debugging tool - which is why I
am interested in any solutions people found for this problem.
Any help would be appreciated,
Simon
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
