Hi,
Here are the SCSI messages that you asked me to send ages ago, sorry for the
delay. To recap, I have an Eesox SCSI card, CD rewriter and 4GB harddisc. The
harddisc seems to be causing problems and I just get repeating messages as
follows when trying to load the eesox module. It is this harddisc I really want
to install Linux to.
Thanks
Peter.
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 4, lun 0 Request
Sense 00 00 00 10 00
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
FAS216: CTCL=00 CTCM=00 CMD=00 STAT=07 INST=00 IS=89 CFIS=20 CNTL1=07 CNTL2=48
CNTL3=B9 CTCH=00
scsi0: fas216_abort: command executing
SCSI host 0 abort (pid 5) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
scsi0: fas216_reset: for target 4 scsi0.H: bus reset detected
scsi0.4: bus phase MESG IN after command?
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 4, lun 0 Request
Sense 00 00 00 10 00
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
FAS216: CTCL=00 CTCM=00 CMD=00 STAT=07 INST=00 IS=89 CFIS=20 CNTL1=07 CNTL2=48
CNTL3=B9 CTCH=00
scsi0: fas216_abort: command executing
SCSI host 0 abort (pid 5) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
scsi0: fas216_reset: for target 4 scsi0.H: bus reset detected
scsi0.4: bus phase MESG IN after command?
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 4, lun 0 Request
Sense 00 00 00 10 00
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
FAS216: CTCL=00 CTCM=00 CMD=00 STAT=07 INST=00 IS=89 CFIS=20 CNTL1=07 CNTL2=48
CNTL3=B9 CTCH=00
scsi0: fas216_abort: command executing
SCSI host 0 abort (pid 5) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
scsi0: fas216_reset: for target 4 scsi0.H: bus reset detected
scsi0.4: bus phase MESG IN after command?
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 4, lun 0 Request
Sense 00 00 00 10 00
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
FAS216: CTCL=00 CTCM=00 CMD=00 STAT=07 INST=00 IS=89 CFIS=20 CNTL1=07 CNTL2=48
CNTL3=B9 CTCH=00
scsi0: fas216_abort: command executing
SCSI host 0 abort (pid 5) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
scsi0: fas216_reset: for target 4 scsi0.H: bus reset detected
scsi0.4: bus phase MESG IN after command?
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 4, lun 0 Request
Sense 00 00 00 10 00
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
FAS216: CTCL=00 CTCM=00 CMD=00 STAT=07 INST=00 IS=89 CFIS=20 CNTL1=07 CNTL2=48
CNTL3=B9 CTCH=00
scsi0: fas216_abort: command executing
SCSI host 0 abort (pid 5) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
scsi0: fas216_reset: for target 4 scsi0.H: bus reset detected
scsi0.4: bus phase MESG IN after command?
scsi : aborting command due to timeout : pid 5, scsi0, channel 0, id 4, lun 0 Request
Sense 00 00 00 10 00
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
FAS216: CTCL=00 CTCM=00 CMD=00 STAT=07 INST=00 IS=89 CFIS=20 CNTL1=07 CNTL2=48
CNTL3=B9 CTCH=00
scsi0: fas216_abort: command executing
SCSI host 0 abort (pid 5) timed out - resetting
SCSI bus is being reset for host 0 channel 0.
SCSI IRQ trail: 82:C9:10:8 87:89:10:3 80:C0:80:3 86:51:18:1 87:81:10:A 87:41:08:8
82:C9:10:8 87:89:10:3
scsi0: fas216_reset: for target 4 scsi0.H: bus reset detected
scsi0.4: bus phase MESG IN after command?
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
