Does anyone here have any familiarity with Cerf SA1110 boards? I'm having a flash issue .. I've got the file systems on an IBM Microdrive in the CompactFlash slot that I want to become the / /usr and the boot image, but, as far as I can tell from the doc, the only way to get it into the flash is via tftp. What I want to be able to do is simply to take the image from the drive and write it somewhere useful to memory/flash, and upgrade the image that way, as opposed to trying to get a system that will run bootp/dhcp and tftp, reconfigure the networking infrastructure and the like. Currently I'm using a Palm-Pilot as the serial console, so I have serial access, and there is no net access to the device. On the ipaq it's apparently possible to simply dd the image somewhere, but does anyone know if it is possible for the Cerf SA1110 boards? Thanks! -dkap _______________________________________________ http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm Please visit the above address for information on this list.
