Hello,
Thank you!
I have a phase 5 assabet(with 28F128J3A flashes) so
my jffs image will be loaded to 0x00040000,the jffs
partition is 31.75M.
Regards
Fengcai
----- Original Message -----
From:John G Dorsey <[EMAIL PROTECTED]>
To:Yves Rutschle <[EMAIL PROTECTED]>
Subject:Re: bootldr + JFFS on assabet/neponset
Date:Mon, 5 Mar 2001 19:59:48 +0800
>Yves Rutschle wrote:
>
>> So it's up to you where you want to load your JFFS.. probably
>> on mtd2 and therefore at address 0x100000.
>
>`load jffs' copies to the partition described in the "jffs" entry for
>your particular flash parts; see bootldr/btflash.c for the maps. If you
>have a phase 4 Assabet (with the 28F160B3 flashes), this means a 3.75MB
>partition beginning at 0x40000. (One erase block for bootldr, one erase
>block for the bootldr params, and then everything else is JFFS.)
>
>-jd
>
>_______________________________________________
>http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
>Please visit the above address for information on this list.
>
>
______________________________________
===================================================================
������ѵ������� (http://mail.sina.com.cn)
����Ѱ��ǧ�ٶ�!û��"��������",����"��˫�ɶ�"? (http://newchat.sina.com.cn)
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
