On Thu, May 17, 2001 at 01:47:32PM -0400, cj wrote:
> In order to change the framebuffer to 256 colours, I set the
> fb_var_screeninfo.bits_per_pixel to 8 and I called ioctl( fd,
> FBIOPUT_VSCREENINFO, &fb_var ). It seems that it didn't work correctly, my
> screen was splitted into two, each of xres = 160 & yres = 120. One sat on the
> left and the other one sat on the right.
>
> What other informations that I need to change in order to get it right?
An 8 bit LCD or some logic between the SA1110 and the LCD to do the
8 bit --> 12 bit mapping.
Erik
--
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands
Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED]
WWW: http://www-ict.its.tudelft.nl/~erik/
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
