On Fri, Jun 15, 2001 at 07:48:24PM +0900, ?????? wrote:
> uda1341's sampling rate is 44KHz in default.
> i would like to set somthing value between 8 KHz and 44.1KHz
> is that available?
Depends on the hardware. The assabet is hard locked at 44.1 kHz, the
iPaq can switch between several sample rates.
> uda1341 linux source operates only in 44KHz.
> uda1341 chip does not support sampling rate except 44.1KHz?
The chip supports as many sample rates as you have hardware clocks
available.
> otherwise, linux drivers is not coding?.
If 'coding' means sample rate conversion: no. Sample rate conversion is
policy, so it doesn't belong in the kernel.
Erik
--
J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department
of Electrical Engineering, Faculty of Information Technology and Systems,
Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands
Phone: +31-15-2783635 Fax: +31-15-2781843 Email: [EMAIL PROTECTED]
WWW: http://www-ict.its.tudelft.nl/~erik/
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
