Hi,
Downloading the kernel into the flash using jtag
takes a lot of time... can anyone suggest me a way of
downloading to flash using serial port because this
option will be faster than jtag.
regards,
john
---------SENG KEONG wrote ----------
The JTAG interface just require 5 JTAG lines:
1. TRST, TDI,TDO,TMS,TCLK and you may bring out the
signals from the SA1110
BGA. (maybe from the vias)
The JFLASH will take control of the SA1110 to program
the FLASH, that is,
the SA will take serial data and program it into the
FLASH througgh its own
system bus.
This is at least needed to download the bootloader, if
not for other linux
components. JFLASH may need to be modified if you are
using a different
JTAG configuration as the evaluation board.
Best Regards,
----- Original Message -----
From: "zombit" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, June 29, 2001 2:42 AM
Subject: sa1110 board ,serial downloading
> Hello, arm-linux developer
>
> I have SA1110 based development board.
> I know I can use Jflash for downloading,but the
board don't have Jtag
device.
> so, can I use any other program for
serial-downloading??
>
> BR,
> zombit
>
> _______________________________________________
>
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
> Please visit the above address for information on
this list.
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
_______________________________________________
http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm
Please visit the above address for information on this list.
